Cannot access the PX1396E external HARD disk

Similar Questions

• Satellite A300-1MH - cannot start the eSATA external HARD disk drive

  When I connect eSATA disk HARD Satellite A300 is locked and the HARD drive is not detected. I tried to connect the HARD drive with both eSATA - SATA + USB power cable Cable when it is powered OFF with the same locked A300 result.
  Reloading utility chipset change anything.

  PS. on another computer same portable HARD drive works fine in both previous cases
  Thanks for the attention
  Fabio

  AFAIK, the chipset drivers are responsible for the usb, esata functions but you already reinstalled it. Have you tried to remove the chipset drivers in Device Manager and reinstall again? If still does not solve your problem, it may be the operating system itself. Using the preinstalled operating system or Windows disk?

• Cannot access files on external hard drive connected to Windows XP to Windows 7

  Original title: to access the shared files on an external drive using Win7

  I have created a shared folder on an external drive attached to my WinXP Home addition.  When I try to accIess to the shared folder on Win7 I see the folder but cannot access the files.  Yet when I create a shared folder on my XP I correctly read files.  Why can't access the shared folder on my external hard drive on my network

  Hello

  Do you get any error messages?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  In addition, we can see:

  Windows 7 & HomeGroup: share with other Windows XP and Windows Vista operating systems

  
  

  http://www.Microsoft.com/download/en/details.aspx?ID=17168

  Hope this helps and keep us informed if you need help.

• To access the contents of hard disks T61 without a laptop.

  Hello

  The motherboard of my T61 had spoiled.

  I would like to know if there is a way to access the content of hard drives without another laptop because I don't know what laptop would be compatible and access to one if there is one.

  I read somewhere that I could use a USB OR SATA hard drive enclosure / adapter IDE... but I'm not sure if it is the right and the only options available.

  Please notify.

  Help much appreciated.

  Tormented.

  Swati

  or the other works perfectly, the only drivers will be a problem if you install it as a main player in many a laptop different, in which case some of the laptops hardware may not work until you update the drivers.

• Cannot access information on external hard drive in Garland

  I have two FireWire G-drive hard daisy chained and connected to my iMac. I am able to access the information for once, but after a while I can't access information from it anymore.

  For libraries of Final Cut Pro, it will say "Final Cut Pro cannot save the changes to the library."

  For iPhoto libraries, he will say it is "Impossible to write in the"[name of library]"library." Check that you are allowed to write to the directory of the library.

  When you try to move anything in the Finder, it will say "the operation cannot be completed because an unexpected error occurred (error code-50).

  So the temporary solution that worked so far is to stop the iMac, disconnect both drives, start the computer, and then connect again. This will cause growth to work again, but only for a time very short before send me mistakes once again.

  How can I fix?

  Thank you

  I hope you both of these backup discs because they failed to comply and when they do, you may lose all your data. Don't do anything until you know that the data is safe. Have you run disk utility to try to repair the disks?

• destination folder access denied in external HARD disk

  I have problem with my external hard drive on windows. I am running windows out of boot camp, my external hard drive had drivers mac and is the mac format what ever he calls. Here's the question, I can't access my hard drive on my other laptop windows (which makes sense) but I can on the mac windows, can I take the files over and pass through them and do what ever... I can't just add files to the disc. If you guys can help, it would be much appreciated. Thank you!

  Hello Andrew,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  When exactly you receive error message "destination folder access denied"? It's when you try to add or to save any file to external hard drive?

  This problem may occur due to lack of permissions on the appropriate folders.

  Please refer to the suggestions of Kia Zhi Tang replied on 1 January 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cannot-save-to-external-hard-drive/36fa7a1d-6f8b-4BC2-B72F-d0b57e733726

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.

• Re: Satellite L850 - 0C9 - cannot use USB3.0 external HARD disk

  Hello!

  I am looking for help from you guys
  because I can't use my NEW SEAGATE USB 3.0 drive HARD EXTERNAL 2 to with my labtop (L850 - 0C9)

  My labtop has 2 blue USB ports and I guess it's USB 3.0 and I checked it manual.

  but when I tried to copy data to the hard disk and after 1 minute, then he continues to display the message "the destination you specified does not exist. It happens every time.

  but I found an interesting point of it works fine with usb 2.0 port so now I use with this port.

  It shows that the hard drive is not a problem, but my laptop is in my logic.

  so I've updated almost all drivers and firmware support page vaissaille intel usb 3.0 driver.

  but it is showing the same message as before.

  Anyone know how to solve?

  Have a great Easter party anyway!

  Ran - this disc external HARD of 3.5 inches with own power supply?

• Re: Satellite L550-129 does not support the Toshiba external HARD disk

  Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard.

  Al other portable thosiba in the family meets the canvio store.e and many former protable?

  Why do you think so?
  Drive external DRIVE is not recognized when you connect it to Satellite L550-129?

• Satellite A300-247 cannot find the folder of HARD disk recovery

  Hello
  I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:

  "the recovery of the operating system is impossible
  File recovery HARD drive on the second disc of the first hard drive not found.
  There is no environment recovery valid HARD drive on this computer. "

  I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
  Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
  If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)

  Thanks for the reply

  Hello

  Seems that drive HARD recovery does not work.
  Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted

  Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive

  Now, you can't get the phone because you don t have this drive and the HARD drive does not work

  What to do?
  Well, I think that you would need new control disc.
  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• OS can not find Gigastore external HARD disk.

  Hello
  I have a problem with my new Gigastore external HARD drive.
  I have a windows 2000 and the operating system can not find the Gigastore external HARD disk.
  One of the systemrequires is that it is compatible with Windows 2000.

  Thank you for your help.

  Sincerely
  Luis

  You don't give much info.
  I would first go in "Device Manager" and check that there is not a question mark with "unknown device" beside him. If this is the case, highlight it and delete it, unplug your HARD drive and restart your computer. Check the Device Manager again, you will need to repeat the process without the connected HARD drive. Then follow the instructions of the manufacturer install the driver. In some cases, you will need to plug it in the first place, in others, first install the driver. The order is important.

• Cannot access the images on external hard drive.

  I'm trying to access a folder on my external hard drive. The folder contains images and the hard drive is the internal hard drive from my old computer with XP as the BACK. The new computer I try to access the folder on a Vista like the BACK. I can open the file, but when I try to open the images, it says I don't have permission to access the location of the file. I tried to implement the steps described in this thread http://answers.microsoft.com/en-us/windows/forum/windows_7-files/accessing-files-on-external-hard-drive/1bd3550f-10fc-406e-be45-0de794343e53 but it did not work. Help, please.

  Hello

  Referring you BACK Disk Operating System?

  I suggest you to follow the steps and check if it helps.

  Step 1: Give Permission to everyone and check if it helps.

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and in the permissions tab, click Add.

  (c) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) type like everyone else, the in called Windows Enter the name of the object to select it, and then click OK.

  (e) in the new window, give select full control and click OK.

  (f) click OK.

  Step 2: in the permission tab (follow step a and b in step 1 to open the authorization tab), if you have any user refused to try to remove it and make sure that include the permissions that can be inherited from the parent of the object is checked.

  Reference: troubleshoot "access denied" when opening files or folders

  I hope this helps.

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.