Cannot add devices usb ESXi 4.1.0

Similar Questions

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.

• Cisco Connect v1.4 for Mac - cannot add the USB printer

  I just installed Cisco Connect v1.4 (11266.0) and have updated my software 1.0.03 E4200.

  I want to add a printer USB connected to the router, but when I open the Cisco Connect, then select the "add new devices... "button, the only option for a printer is"Wireless Printer", not"Printer"followed by USB or wireless user guide. There is now way to add a USB printer. Any suggestions?

  Hello.

  It is an old Bill, still not fixed!

  http://homecommunity.Cisco.com/T5/Cisco-connect/no-option-for-USB-printer-on-Cisco-connect-1-4-11266...

  Greetz

• Cannot add 6.0 ESXi host to vCenter 6.0

  Hi guys,.
  I'm having a problem where I can not add any ESXi 6.0 host to vCenter 6.0. I can add an ESXi 5.5 without problem.

  I have the error that I get in the vpxd log is:

  2015 06-18 T 16: 36:37.312 + 01:00 info vpxd [03624] [sub Originator@6876 vpxLro = 120602 ca opID =] [VpxLRO] - tache-interne-69093--datacenter-26--vim BEGIN. Datacenter.queryConnectionInfo--524f7656-a68d-ef60-05e7-f24ec8a5f1b5(52359e42-f098-7b77-bc82-0cff38aa6ff9)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [04352] [Originator@6876 = 000001-HttpConnectionPool sub] [ConnectComplete] connection failed for < cs p:0000000008c8bfb0, TCP:192.168.0.12:443 >; CNX: (null), error: class Vmacore::Ssl:SSLException(SSL_Exception:_error:140000DB:SSL_routines:SSL_routines:short_read)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [03624] [sub Originator@6876 = opID httpUtil 120602 ca =] [HttpUtil::ExecuteRequest] error in sending request - SSL Exception: error: 140000DB:SSL routines: SSL routines: short read

  I can ping and resolve all ESXi host and checked the SSL certs and they look good too.

  Any help would be appreciated

  Dougie cordially

  Found the problem as vCenter 6.0 version I was running. I was running an older version of the VC and the current version of ESXi.
  Downloaded the current version and reinstalled and all good.

  Dougie

• Cannot find device USB-6216 Simulator

  I'm trying to simulate the USB-6216.  When I go to create the simulated pilot I don't see the 6216 as one of the options.  Renault USB are in the range 92xx.

  Thank you

  Mark

  Look under the M Series DAQ instead.

• Integration of the NAC Profiler - cannot add list of filters on cam

  Hi all

  I have a problem with the Profiler - integration of the NAC for endpoint profiling.

  Here's the situation:

  I have already created the integration based on the steps in the Guide: Setup Cisco NAC Appliance integration. I think that the configuration is correct, because I can do database synchronization between the Profiler and CAM. Here's the log of server profile:

  NAC_SYNC: Task_Queue_Runner commissioning
  NAC_SYNC: Profiler / END of synchronization of the NAC [add 0, upd 0, desc 0, rm 0]
  NAC_SYNC: Profiler / START the synchronization of the NAC
  INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)] is for eth0 MAC

  I have already created a profile of endpoint named "Admin" which is based on the IP address. I also created the NAC events based on endpoint profile 'Admin '.

  The event of the NAC will present 'Admin' profile to a role of the NAC. This event aims to circumvent 'Admin' of the legalisation of the ANC visa so that the "Admin" can connect to the network automatically to a role of the NAC.

  However, when 'Admin' to connect to the network, it still is challanged by NAC. I don't see "Admin" on the filter of the CAM or the list.

  This means that the endpoint profiling is still broken.

  Is there anyone who have experience with this?

  Thanks for the support and comments

  Imad

  Hello

  You cannot add devices manually on the profiler.

  The Profiler has to detect automatically (it is the concept of profiling).

  How this Profiler detects endpoints use the modules of collector.

  Each module has endpoints detection means.

  You will find the description of each collector module here:

  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_intro231.html#wp1062345.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• WXP and Portege R500 - cannot add a new USB device

  Hello.

  I have a new Portege R500 Windows XP Home edition. It works great except for one thing, when I try to add a USB device does not install automatically.

  I get the 'Add new hardware' Wizard, who found the drivers and starts to copy the files... but it's like that. Animation of the files copy in place going and going and going, but never leaves. From this point that the whole machine froze (only the pointer of the mouse is sensitive), it ignores even ctrl-alt-delete and I have to turn the machine off.

  I tried several times, with a couple of different drivers and still get the same result. The device installs on my old M100, also running windows XP.

  If someone knows what's going on (and more important, how I could solve this problem), I would be really grateful.

  See you soon.

  Hello

  Compare 4 years, M100 (designed for Windows XP Home edition) and more recent Portege R500 (more recent hardware and Vista pre-installed) is for me quite flippant.
  Can you please tell us what external device to use with your beautiful Portege? Perhaps a printer?

  One more thing: have you noticed the same problem using different USB devices?

• Devices USB 3.0 not being seen by 5.5 ESXI (free version)

  I'm under 5.5 ESXI (free version) and I have recently just got 2 external drives 5 to, these are going to be my new NAS readers who are easily made by samba on a virtual machine Windows Ubuntu LTS 14.04. When I plug the readers to a port USB 2.0, the ESXI OS will detect them and allow me to add them to a virtual machine but USB 2.0 are slow and these drives are capable 3.0 and my motherboard has 2 3.0 ports then why not try to get the extra speed. When I plug these drives into the USB 3.0 ports OS ESXI cannot see them and when you try to add USB devices to the virtual computer it says no device available. No idea as to why this is? IM guess 3.0 is supported on ESXI 5.5 (free version) because it allows me to add a USB 3.0 controller support. Thanks in advance for any help.

  FIXED!

  I have SSH on the server and typed this command:

  lsusb

  It gave me a list of all my usb ports and devices. My 3.0 ports not appear. So I started the USB 3.0 xhci driver by typing this:

  vmkload_mod xhci

  then I typed in:

  lsusb

  again and then is! my cameras are now available!

  Add this command to the file /etc/rc.local.d/local.sh that it will always start with the loaded discs.

• Cannot add USB controller to the virtual computer

  We are trying to add a USB port to a virtual machine under ESXi 4 (free) material: it gives us the opportunity, said it can be added to this virtual machine, shows, she added to the list, but when I click on 'ok' final we get this error in a pop-up (Word for Word):

  "There are not enough licenses to complete this operation.
  ' Hotplug not approved, required function have need.

  Yes, that's exactly how the second line reads.

  In ESXi 4, you must completely shut down the virtual machine before you can add the USB controller. It's a change of 3.5, enabling you to 'hotplug' material while the machine was still running.

  In addition, you will probably be able to connect a USB device to a virtual machine. I have yet to find someone who has got this to work with the free license and no additional software. There are USB for IP devices that have been suggested for use with ESXi. If someone got the USB transfer to work on a box of vanilla ESXi, pleas ëlet me know. It would be quite beneficial.

• Cannot open any usb device - help!

  cannot open any usb device - including external hard drive for back in place - in one of the ports on my computer - they all work on other computers - worked well on Friday - doesn't work don't not Monday - get up unknown device message and shows even in Device Manager - have you tried to uninstall etc - does not work - nothing I found solves the problem - can my computer blew something that only affects reading USB keys?

  Hello

  1. what exactly happens when you try to connect the USB device?

  2. you receive an error message when you connect the USB device?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Cannot stop a USB device due to some unknown program running.

  If I can't stop a device USB due to some unknown program running (like a virus), how can I find the program, so that I can stop it with the Task Manager?

  Hello

  The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

  The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

  So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

  A cut-off device

  Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in the tray on the side right of the bar tasks, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.

  I also suggest you make a system full scan just to be sure.

   http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Cannot eject the USB device.

  Cannot eject the USB device. I don't see the icon to safely remove in the task bar.
  I tried to run the following path, but not luck.

  (C:\Windows\System32\rundll32.exe shell32.dll, Control_RunDLL hotplug.dll)

  The icon is hidden behind the small arrow in the lower right of your screen.  Click on that, and you will see a number of icons, which one will remove safe material one.  Be aware that unless you have a removable USB device connected, the icon will not be there.

  Good luck.

• After upgrading vSphere 5.5 replication device cannot add VM replication

  Dear all,

  We have improved our server vcenter and device of replicaion of vpshere of version 5.1 to 5.5. after upgrade cannot add new virtual machine replication replication vsphere device. Configure the replication vsphere option grey out on VM right click menu. See the image below.

  

  Please advice how to solve this problem.

  Thank you and best regards,

  Lasa.

  Hello

  There is a known issue for this behavior described in VMware vSphere replication 5.5 Release Notes (shares of vSphere in vSphere Client Web replication are not available after the upgrade.) The solution is to restart your Web Client vSphere