After upgrading vSphere 5.5 replication device cannot add VM replication

Similar Questions

• After upgrading to IOS 10 my devices cannot connect to PC

  I can't connect my Ipad and Iphone to my pc after that I updated to IOS10 but my ipad mini, which has not been update has yet no problem connecting to the pc. What should I do?

  No matter how many times I tried to remove the cable and click approval, nothing happens and still no connection to the PC

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Deploy from model does not not after upgrading vSphere 5.5

  Hello, we have recently upgraded to vSphere 5.5.  We have deployed a new vCenter server as part of the upgrade and after you add the models again in the inventory on the new vCenter server, I'm not able to deploy a virtual model computer.  Get the "unable to complete copy of /vmfs/volumes/.../template.vmdk file" when it gets to step 'copy of Virtual Machine files.

  I checked that there are no locks on the vmdk

  I converted the model of a machine virtual, deleted (not deleted) the disc has added a new drive (from existing), saved, powered by the virtual machine, power and he converted.  Still doesn't work do not with the same error message.  Has anyone other that saw issue before or have a glimpse into what could be the cause?

  The question was NetApp VAAI Plugin for NFS.  Installed 1.0.21 that solved the problem.

• Storms machine lost after upgrading vsphere vmware

  Hello experts,

  After I've upgraded vcenter version 4.1 to version 5, I can not listed models on models and virtual computers via vsphere client.

  Although I still browse these models on data warehouses.

  How to solve this problem?

  Any help is appreciated,

  Thank you and best regards,

  As I understand it, is that the models for virtual machines are more listed in vCenter Server inventory. But as you have models in the data store, try this

  ->, double-click the data store that the template is stored.
  -> Navigate to the data store in the folder containing the model.

  ->, Select the model configuration file, which has the extension .vmtx. Right click and select Add to the inventory.

  Model will now appear in the inventory list. Hope this helps!

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• Corruption of the repeat rate of the keyboard after upgrading vsphere 5.0

  I currently have a problem with some of my XP VM.  We have a group of two moderators which I upgraded to esxi5.0 recently and since the upgrade of the tools on a number of machines that I had the following problems.

  Using the Vsphere console have not seen a problem with RDP.

  On XP but NOT on Linux or windows7

  After the reboot the virtual machine, and then at a random time, the keyboard repeat rate going funny IE, press a button and release it as fast as you can results in 20 characters in the Notepad window.

  Can solve the problem by going into the properties of the keyboard in the control panel and change the keyboard typematic rate, it does not matter what you change to or if you change it back to where it started, the problem disappeared for a while.

  The problem refers to a random time again and can be fixed in the same way.

  Restart the virtual machine has no effect.

  VCenter restarting has no effect.

  Restart all clients of VSphere has no effect.

  Restart the local running vsphere client pc has no effect.

  Opening of the two consoles on different clients in different vshpere on the PC to connect to the same VM - you can have the issue and the other may not have a problem.

  VSphere client 5.0.0 / 455964

  VSphere Host1 5.0.0 / 469512

  VSphere Host2 5.0.0 / 469512

  I don't know what else to try, any help would be greatly appreciated.

  Welcome to the community!

  Try increasing the value of "keyboard.typematicMinDelay" of the virtual machine. Ref: http://kb.vmware.com/kb/196

  • The virtual machine power off
  • Make a right click Select Edit virtual machine settings
  • Click Options > general > Configuration settings
  • Click Add a line
  • Under name, enter keyboard.typematicMinDelay in the value to 2000000
  • Click OK
  • Turn on the virtual machine

• Existing licenses for esx 3.5 after upgrading vsphere vc

  Hi all

  I start to think to upgrade our infrastructure to vsphere, but I'm not not clear about the licensing. If I update our vc2.5 to vsphere, I understand that there is not real server as all its treaties by vsphere license, so what happens in esx 3.5 boxes after the vc upgrade.

  They drop mode 14 days as they would if they lose the connection to the license server, or server licenses always runs parallel to the authorization of vc and I just uninstall the license server when all hosts have been upgraded?

  Concerning

  Dale

  ESX 3.5 can still be managed by Virtual Center 4. Once you upgrade the ESX 3.5 servers to VSphere (ESX4), you will see that the licenses for the 3.5 servers are still there until the license server is still in existence.  As long as you have ESX 3.5 servers - even if they are managed by VC 4 you need the license server.  Until all 3.5 servers are upgraded to VSphere, you can not get rid of the license server.

  If you find this information useful or appropriate, please consider giving points.

• SSL error after upgrading vSphere

  I upgraded to vCenter Server 4.0.0 today and the following plug-ins do not load when you start the VI - material status vCenter client and vCenter Service status.  The error message in the window manager plugin is "the following error occurred during the download of the plugin script of https://servername:8443/cim-ui/scriptConfig.xml: Impossible to connect to the remote server."  The tab overview of performance also does not work either.  After some searching through the logs I have determined that when the management of Web Services service starts it generating SSL errors.  The newspaper of vpxlicent I see several messages "Validation SSL failed in WebRequestPatch" followed by "no connection could be established because the target machine actively refused it" when it tries to download the scripts for plugins.  In addition, I see it in the tomcat log, catalina.2009 - 07-23, when to start the service of Web services:

  SEVERE: End Point initialization error

  java.io.IOException: could not decrypt entry content secure: javax.crypto.BadPaddingException: given the final block not well padded

  Followed a few seconds later by the present (after much more SSL error messages similar to the one above):

  NEWS: Stop Coyote HTTP/1.1 on http-8443.

  I'm assuming that the last line is the reason why I can not connect on port 8443, and why a netstat doesn't show anything listening on this port on my box of VC.  I know that my certificates of work (up to a certain point) because if I connect via https on port 443 for my box of VC, it works fine.  It is only by trying to connect to 8443 this problem occurs.  I already tried the steps of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1010641 even if I don't get all messages that point to problems of name resolution and it did not help. 

  Anyone have any ideas?

  I had same problem as described above. In my case, the reason for which the 8443 service did not start is that tomcat was trying to use the wrong password to open the file rui.pfx. I did the following to solve this problem.

  1.) stop windows services on vCenter

  (2.) %PROGRAMFILES%\VMware\Infrastructure\tomcat\conf\server.xml open in Notepad

  3.) search for "< connector port ="8443 ""

  4.), you will see that this line refers to the rui.pfx certificate file that was change when you updated your certificate. Update the 'keystorPass =' for the password of the rui.pfx certificate.

  5.) start the vCenter services

  NOTE: The password cannot be empty for the rui.pfx as it was in my case, because this would cause its failure. I had to import and then export the rui.pfx with a password to get the above to work for me.

  Hope this helps guys.

• Windwos 2008 discs you wish after upgrade vSphere HW V7

  Don't know if this is a problem known so sorry if I'm duplicating here - W

  e has noticed a problem with all of our machines of windows 2008 with more than 1 vdisk comments. After the upgrade to V7 HW all the disks would disappear except the Disk0. The VM booted up but couldn't see a single disk.

  Using dispart - drive list, we could see all the disks where there but drives additional 1,2,3 etc. where marked offline

  We have marked themonline with the following commands

  Select disk 1

  online drive

  Whe did with each drive and they are now online, but offline read-only-, we fixed this with these commands

  Select disk 1

  att disk clear readonly

  This past with all of our machines in 2008. Anyone else see these issues?

  see this

  http://KB.VMware.com/kb/1013109

• Cosmio G30: no sound after upgrade Vista - no audio output device installed

  Hello! I just installed Vista Ultimate and now is not any noise:(il dit aucun périphérique de sortie audio n'installé s'il vous plaît aider!)

  Qosmio G30 drivers are out but I have not installed vista yet, it's here
  http://209.167.114.38/support/download/ln_byModel.asp

  you upgrade or install own detail? I have ultimate improvement but my RAID driver were old version, then it crashed during installation.

  my email is [email protected] let talk more.

• I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

  I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

  I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

  Update to the Sierra officially released

• Neverending task after upgrading from 5.0 to Update1

  After upgrading vSphere 5.0 Update 1, I get a message in vSphere Client:

  Upgrade to vCenter Agents on the hosts in the cluster = in course

  
  

  After a few days, the message is still produced. I forgot to update a specific part?

  Maybe you have the same problem mentioned here

  As suggested try disabling the autoupgradeagents and install the agent on the hosts manully

• After the upgrade to Windows 7 Ultimate HD 4300 ATI Radeon - the device cannot start (code 10)

  Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).

  Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.

  Hello

  Please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/943104

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!