Cannot add the link in the custom tool

Similar Questions

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Failed to add the custom library group object?

  I recently upgraded computer and reinstalled Livecycle on my new computer. On the new computer, in Livecycle, when you try to add a custom library of objects, object I get the following message:

  "Cannot add the object"name"to the Group of the library."

  I checked and made sure that in the properties of the group, all items "allow objects...". "are checked. The location of the libraries are in my file C:\Program Files (x 86) \Adobe\Acrobat 10.0\Designer 9.0\EN\Objects\ . Any idea what's going on? It will be a huge setback for me! I have to update the custom very often my objects.

  Thanks in advance.

  All of a sudden it just started working. Don't know what happened.

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Is it possible to add the stamp tool in the menu bar?

  I would like to add the stamp tool, which is available on the Tools page for my bar menu for easy access. Miss me probably something simple, but I can't figure out how to make this happen.

  Hi benw23104454,

  I'm sorry that it is not possible to add the stamp tool in the menu bar. Its a part of the comment tool & returns once you click on the feedback tool.

  Kind regards
  Nicos

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• Problem with sleep, cannot identify the customer in ALF

  Hello!
  I have primary and standby DB (10.2.0.1, OEL5.3 x 64 primer, sleep on OEL5.3 itanium)
  Almost everything is fine, but sometimes I have this problem:
  
  FAL [Server]: cannot identify the customer in ALF, null string provided
  
  [ORA-07445: exception encountered: core dump [< 0x3f4b370560 >] [SIGSEGV] [address not mapped to object] [0x403FE6D3A60] []]
  
  
  Piece of newspaper of primary alerts:
  
  Wed Mar 25 15:00:30 2010
  Thread 1 cannot allot of new newspapers, sequence 30980
  Private stream flush is not complete
  Currently Journal # 4, seq # 30979 mem # 0: /sdd/oradata/a10/redo04a.log
  Currently Journal # 4, seq # 30979 mem # 1: /sdc/oradata/a10/redo04b.log
  Thread 1 Advanced to record the sequence 30980
  Currently journal # 5 seq # 30980 mem # 0: /sdd/oradata/a10/redo05a.log
  Currently journal # 5 seq # 30980 mem # 1: /sdc/oradata/a10/redo05b.log
  Wed Mar 25 15:00:37 2010
  FAL [Server]: cannot identify the customer in ALF, null string provided
  Wed Mar 25 15:00:37 2010
  Errors in the /app/oracle/admin/a10/udump/a10_fal_957.trc file:
  [ORA-07445: exception encountered: core dump [< 0x3f4b370560 >] [SIGSEGV] [address not mapped to object] [0x403FE6D3A60] []]
  Wed Mar 25 15:00:47 2010
  ARC3: Standby redo log file selected for thread 1 sequence 30979 for destination LOG_ARCHIVE_DEST_3
  
  
  Piece of a10_fal_957.trc:
  
  ALF Redo shipping Client does not have a network connection
  Exception signal: 11 (SIGSEGV), code: 1 (address not mapped to the object), ADR: 0x403fe6d3a60 PC: [0x3f4b370560, cannot find s$]
  < 0x3f4b370560 >]
  
  
  The primary settings:
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  fal_client string a10sb
  fal_server
  log_archive_config string
  string log_archive_dest_3 = a10sb service
  log_archive_dest_state_3 string ENABLE
  log_archive_format string %t_%s_%r.dbf
  
  
  Piece of standby alert log:
  
  Media, recovery waiting for thread 1 sequence 30979
  Wed Mar 25 15:03:03 2010
  Pick up the empty sequence in thread 1, sequence gap 30979-30979
  FAL [client, MRP0]: error recovery 3113 archived redo log of the a10
  Wed Mar 25 15:03:04 2010
  Errors in the /app/oracle/admin/a10sb/bdump/a10sb_mrp0_15411.trc file:
  ORA-03113: end of file on communication channel
  Wed Mar 25 15:03:13 2010
  RFS [6]: Eve successfully opened journal 1: ' / sdd/oradata/a10sb/redo01a.log'
  Wed Mar 25 15:03:34 2010
  Online Redo Log recovery: thread 1 mem Group 1 Seq 30979 reading 0
  Mem # 0 0 error: /sdd/oradata/a10sb/redo01a.log
  # 1 MEM Err 0: /sda/a10sb/redologs/redo01b.log
  Wed Mar 25 15:05:03 2010
  Media, recovery waiting for thread 1 sequence 30980
  
  Sleep settings:
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  fal_client
  fal_server string a10
  
  What is going on?
  Why "ALF redo shipping Client not establish Network Login" does it happen?
  And how I can fix without path?
  
  A big thank you!
  
  Dmitry

  FAL_CLIENT is an entry of tns for the current instance
  FAL_SERVER is an entry of tns for example where RSF fetch missing archive logs.

  Please provide both side sleep. Make sure you have them in file tnsnames.ora pending

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• How to add images of the icon to the button of the custom tool

  Hello

  Can any one help to add the image to the button of the tool customized in adobe reader?

  Thank you

  Ma'ariv

  In the preferences to activate the entry "see the console on errors and messages.

• Cannot add the program to enable the WIndows firewall

  I try to install Peachtree Accounting 2011 and firewall Windows gives me a message «firewall WIndows cannot add Peachree accounting 2011»

  to the exceptions list", so I can't install the program.  I tried almost everything.  Not very technologically trained but can follow instructions well.  Thank you

  Here is a fix for this problem:

  Tweaking.com - repair Windows Firewall 2.8.8

  http://www.MajorGeeks.com/files/details/tweaking_com_repair_windows_firewall.html

  I had a customer with the same problem - cannot add programs, and the link above has solved the problem.

• How can I add the hand tool from the toolbar on Adobe Acrobat Reader DC?

  Acrobat Reader DC (I downloaded the correct version of Windows 10, so this isn't a compatibility issue) runs on Windows 10 on a tablet with touchpad online - I have a mouse or conventional keyboard.

  The CD player was installed less than a week ago and 10 of Windows has been installed in about three weeks. Windows 10 is fully updated.

  
  

  How can I make the hand tool appears in the toolbar so I can scroll after that I used the tool to highlight? The hand tool only appears in the unlocked page controls menu... So I need to dance my finger on the bottom of the page to make the mini toolbar appear, then select the hand tool. otherwise, I can't scroll with my finger because the highlight tool cannot be disabled. Is it possible to place the hand tool in the permanent toolbar?

  Hi nweissma,

  I'm sorry, but the hand tool to pan on the document is available in the bottom floating toolbar.  There is no way to add it to the toolbar at the top.

  This seems to be the behavior of the design.

  Kind regards

  Nicos

• Cannot add the license key after ESXi 4.0 set to level

  All the

  AFTER an upgrade successful ESXi 3.5 to ESXi 4.0. I can't add my basic features free license key. Before the upgrade, that I was NOT in trial mode, I had already entered the license key for the basic version of esxi 3.5 several months ago, and things have been fine. Now, after the 4.0 update, I am in trial mode - only now, I'm unable to enter a license anywhere key. If I go into the tab Configuration & gt; Software & gt; A license of features, it is said: evaluation Mode and then if I click on edit - my options are: rename, delete and parameters of the customer, with the first two options are grayed out and cannot. I have the key ESXi 4.0 that I got when I downloaded 4.0 but just can't get anywhere to exit assessment!

  Any ideas?

  Thank you

  There is an another "Edit", you must click on.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• How to add the custom search engine?

  Hello
  Firefox is a great browser especially for those who care about freedom and privacy. I would like to know why it is not possible to specify the custom search engine that you were able to do in the latest version of Firefox. I want to use the search engine google with https://search.disconnect.me/ which offers the possibility of anonymous research. I know that there is a plugin https://disconnect.me/search, but is not very comfortable with respect to the standard search bar. Thank you

  I read the solution proposed here https://support.mozilla.org/en-US/kb/use-search-bar-firefox-and-manage-search-engines#w_add-a-search-engine but in 36 of Firefox does not work

  TypeError message probably explains why you could not add the page of Mycroft search engine initially.

  When I search this exact error in Google, only that rolled up from July 2013:

  As long as the 'Integration of office of Unity 2.4.6' plugin is enabled I couldn't add to Firefox search engines.
  https://bugs.Launchpad.NET/Ubuntu/+source/unity-Firefox-extension/+bug/1202383

  Note: this option is not a Plugin, this is an Extension and available on the page Add-ons with other extensions.