Cannot add the new layer

Similar Questions

• cannot add the new hard drive more than 2 TB on vsphere upgrade 5

  can someone give me a clue? I can't add new greater than 2 TB drive to my vm on my upgraded vsphere 5.0. My data store is 6 TB and already read by vsphere... I create new virtual machine and add the new drive, but it limits again just 2 TB when I change 4 TB, the error message will appear. I recently added my datastore LUN with VMFS5 version. is there a any mistake I made? Please help me this problem is so frustrating me... i need to create new disk 6 TB to my new file server

  Hello.

  You will need to use a RDM in physical Compatibility Mode to achieve. As weinstein5 said, a VMDK cannot be greater than 2-to-512bytes. You can use the OS to spread over several 2 TB-512bytes VMDK, if that's what you really want.

  Good luck!

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• Cannot add the new data store

  VM dear supporters,

  My vSphere environment: 1 vCenter Server Foundation, 3 vSphere 4.0 Enterprise 5.0 and vSphere Client 5.0

  1. read the error message in the attachment:

  "hostdatastoresystem.queryvmfsdatastorecreateoptions...". »

  2. already the ESX02 reboot but still unable to add the new data store.

  New size of the data store = 3.1 TB

  Need to vmsupport on this subject.

  Thank you

  Hello

  Size Max LUN VMFS is 2 TB-512 MB in vSphere 4 (your hosts are in version 4), if you want to add 3.1 TB LUN first upgrade ESX hosts to version 5

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Cannot add the new nfs datastore

  Hello

  I would like to get some advice how to add a new nfs data store. Here are the steps I did:

  (1) I have setup a stand-alone ESXi 4 server. I configured the VMNIC0 with 192.168.100.1/24 IP with Vswitch0.

  (2) I have setup a NFS storage. The NFS share is file://\\192.168.200.2\share. I tried using a Windows laptop and I can access the share.

  (3) ON the ESXi server, I created another Vswitch1 with VMNIC1 IP 192.168.200.1/24. I connect my storage to VMNIC1. ESXi, I'm able to ping my storage 192.168.200.2.

  (4) I connect my Windows laptop (IP 192.168.100.2) to VMNIC0. I am able to Vsphere Client to the ESXi server.

  (5) using the Vsphere Client user interface, I click on 'add the new data store '. The fields that I get are "192.168.200.2" and "share". I got the below error message:

  "Error while configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server.

  What it went wrong?

  Kind regards

  Kent

  No claim, the NFS must be in the same subnet as your ESX VMKernel Port and your VI Client must be in the same subnet as the Console of the ESX Service / Management Port. But in many cases (especially with ESXi and if not configured otherwise) management and VMKernel are on the same Interface / subnet.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Co-author of the German reference work on virtualization and VMware

  "Das Virtualisierungsbuch" - http://www.cul.de/virtual2.html

  Regular author on virtualization and other topics in the Magazine German FreeX IT in ass

  http://www.cul.de/freeX.html

• Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

  I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

  When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

  My test was then on the 6th and last instance and went well.

  When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

  If I have one of these printers connected to the 6th port, it worked fine.

  I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

  I tried to add the port via the registry - he added, but would not yet print.

  Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

  I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

  I modified the local security policy to enable users to add printer drivers.

  And I have now run out of ideas! Someone at - it a?

  Thank you

  This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

  So it's fixed

• Cannot add the new top of mask

  Hey guys,.

  I try to add my layer mask using the sdk, but I can't make it work right!

  Here is my code,

    AEGP_MaskRefH maskItem;
    A_long maskIndex;
    AEGP_StreamRefH maskStream;
    AEGP_StreamValue2 maskStreamValue;
    AEGP_MaskOutlineValH outlineValue;
    AEGP_VertexIndex vertexIndex = 0;
  
  
    ERR(suites.MaskSuite6()->AEGP_CreateNewMask(*layer, &maskItem, &maskIndex));
    ERR(suites.StreamSuite4()->AEGP_GetNewMaskStream(aegp_plugin_id, maskItem, AEGP_MaskStream_OUTLINE, &maskStream));
  
    A_Time time;
    time.scale = 1;
    time.value = 0;
  
    ERR(suites.StreamSuite4()->AEGP_GetNewStreamValue(aegp_plugin_id, maskStream, AEGP_LTimeMode_LayerTime, &time, TRUE, &maskStreamValue));
    outlineValue = maskStreamValue.val.mask;
  
  
    ERR(suites.MaskOutlineSuite3()->AEGP_CreateVertex(outlineValue, vertexIndex));
    AEGP_MaskVertex newVertex;
    newVertex.x = x;
    newVertex.y = y;
    newVertex.tan_in_x = inX;
    newVertex.tan_in_y = inY;
    newVertex.tan_out_x = outX;
    newVertex.tan_out_y = outY;
  
  
    ERR(suites.MaskOutlineSuite3()->AEGP_SetMaskOutlineVertexInfo(outlineValue, vertexIndex, &newVertex));
  
  
    ERR(suites.MaskSuite6()->AEGP_DisposeMask(maskItem));// dispose the mask item
    ERR(suites.StreamSuite4()->AEGP_DisposeStreamValue(&maskStreamValue)); // dispose the stream value
    ERR(suites.StreamSuite4()->AEGP_DisposeStream(maskStream)); // dispose the stream
  
  

  I add a new mask to my bed, but there is no top on it!

  What I am doing wrong?

  Li Zhiqing salvation!

  You're almost there (I had the same problem...).

  Once you have set the MaskOutlineVertices, what you have already done, you must always set the value of flows.

  Thus, line 31:

  ERR (suites. StreamSuite4()-> AEGP_SetStreamValue (aegp_plugin_id, maskStream, & outlineValue));

  See you soon,.

  François

• Virgin Media UK has changed his ISP address and I cannot add the new address through automatic or manual, how do I do it?

  Virgin used to use google for it's email service has recently created a new ISP of it own. I'm unable to find using the automatic "Add account" in Thunderbird. I tried to do it manually without joy. I can't get into my email account using webmail blank page. Any suggestions please?
  GMN

  Via the Menu bar
  File > new > existing e-mail account
  or
  Via the mail toolbar
  Icon of the menu > new message > e-mail account

  Enter the name
  Enter the full e-mail address
  Enter the password - same one you use to access webmail

  Select this option to remember password.
  Click on "continue".

  Thunderbird tries to search for configuration settings.
  Check: He selected the right account type: POP or IMAP
  Are the correct settings... see info at the link below.
  the manually set/correct
  Click on the button "Manual Configuration".

  See here the setting on the server:
  http://help.virginmedia.com/system/selfservice.controller?configuration=1001 & PARTITION_ID = 1 & TIMEZONE_OFFSET = & usertype = 1 & VM_CUSTOMER_TYPE = Cable & cmd = VIEW_ARTICLE & article_id = 2743

  According to your email... the portion after the @, this will determine what will be the name of the server for POP/IMAP/SMTP.

  Use the "Re-test" button to verify the changes.
  Click 'Done' to create the email account.

• Cannot add the new credit card issued in another country

  I need to change the credit card used for my subscription to Adobe. When I enter new credit card details and new billing address, I can't save anything because "the zip code is incorrect" (IE does not match my previous country). I need to change my country to change credit card details, but I don't know where to do it. Help?

  OK, the current plan has been cancelled and I will issue a refund for the current month you have barely renewed.

  Please go ahead and create a new Adobe ID with the Slovenia as the country using the same email address.  Then sign up for a new plan.

  If you have any questions, please let me know.

  Thank you

  Bev

• I have a background image.  How can I add an image to the new layer?

  I have a picture as locked background.  When I create a new layer, how can I put a new photo on the new layer?

  File > place bound to add image (press ENTER after you have size and position) and it will become a dynamic object on its own layer.

• Cannot drag image on stage in the new layer, the library?

  For a text catalog assignment, it must make a new layer, then drag an image in the library panel on the stage, but it won't let me? The new layer is not the same aspect as the rest in the timeline too.

  You must save it as an image (png, jpeg, gif).  You have imaging software?  If you have a PC, you should have the Paint program in your accessories.  You can paste the screenshot into it and save it as one of these types.

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Position of the object changes with the new layer

  After Effects CS6 11.0.4.2

  I have installed recent updates, according to this page (FAQ: what information should I provide when you ask a question on this forum?)

  10 Pro 64-bit Windows

  I have an AMD FX (tm) - 8350 eight cores 4 GHz processor

  8 GB RAM

  AMD Radeon 200 series graphics card R9

  3rd party plugins installed: 3-d element.

  I have an object made to 3D element bound to a null object to control its movement. The position that there is everything I like. However, when I add a new layer (layer setting, sound, text or other) changes the position of the null object. It comes to a lot of trouble because I use 3d objects and as they occupy a different position, their movement seems wrong.

  I wanted to add an adjustment layer, so I précomposé just what I have and add the adjustment to the model layer, so it does not change. It worked perfectly. But, now, I want to add a new text object, bring it to feature 3D extrude it and bind it to a null object, the problem is that if I add the null object, or the text layer to the original model, the previous objects will change their position.

  I use phrases such as wiggle and time * with the first null object. This has something to do with that evil?

  How can I solve this problem?

  Thank you

  Yes. The seed of wiggle() and other Pseudo-aleatoires functions is obtained according to the index. You must manually set a seed with seedRandom (< your="" value="" here="">, true) to avoid tampering. This is nothing unusual.

  Mylenium

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Add the new hard drive into the data store in ESXi 4.1

  Hi all

  I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

  I added a new 500 GB scsi hard drive to the server,

  and I need to add it to the datasore or create a new...

  How can I see this new hard drive? and add it to the data store?

  Waiting for your help.

  concerning

  Abrams

  Oracle system engineer

  Abrams,

  That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

  1. unscrew the hot spare that you just made.  Follow this link from Dell.
  http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

  2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

  This link has three steps to void, skip the step on "spare parts of designate hot."
  a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
  (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
  c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

  After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

  And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

  Good luck.