Cannot add two text fields in the same row

Similar Questions

• How can we add a text field on the stage, but without the text label?

  How can we add a text field on stage, but without the left text label by default?  I want just the field.

  I thought about it.  Go to the page layout palette and change the options of caption for the text box.

• How can I add two different colors on the same object?

  Hello

  Say if I have something that I have a circle and I want the black semicircle and the other half with white. How can I do this?

  Thank you

  actually, sorry, forget something: you can fill it with a gradient that has two color stops in the same place. It is maybe a little more ordered according to what you need.

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• I have two text fields, where the user will sign a text field and the other text field should be mandatory

  I have 2 text fields, and how can I do a condition when the text 1 field is entered, then they must enter data into the text field 2.  I know it seemed simple, but I'm just a beginner in this... Thanks in advance!

  Hello

  I'm sorry, I forgot this matter.

  Please try this code...

  If (this.isNull)

  {

  TextField2.validate.nullTest = 'error ';

  }

  on the other

  {

  TextField2.validate.nullTest = "disabled";

  }

  Hope than that,

  S, candy.

• Cannot connect two work spaces in the same browser window

  Hello
  Happy holidays to all. I have problem to identify two workspaces (associated with two diagrams) in a browser with two tabs in the browser. The situation as the following:
  
  -Using Internet Explorer 7.0 or Firefox
  -Login in A work space, associated with the AA scheme. (connect successfully)
  -Then, click New tab in the same browser window, log in the workspace B, associated with the schema BB. (connect successfully)
  - The tab of connection of space one was closed (kicks) automatically.
  
  If I open two separate browsers, I can connect a work space in the window of a browser and connect another workspace in a separate window, not tab.
  
  Why? Is somewhere, I missed setting or configuration for APEX? All advice is greatly appreciated.
  
  Candice

  You're right, you can't do that.

  Try using Firefox chrome and one for the other.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• I work in forms in Adobe Acrobat Pro - My Add a text field and add the jump buttons checkbox in the page and do not place I wish it. How should I do?

  I'm working on a scanned page that I insert form fields. I used this exact page before with no problems, but now when I go to add a text field in the box, it jumps all over the page and not have a place where I want to. How can I solve this problem. I tried to open a blank version of the page and they all do the same thing.

  Go to view show/hide - leaders & Guides and uncheck the snap to grid

  option.

  Wednesday, June 11, 2014, at 8:42, surfer hawaii [email protected]>

• How to fill two text fields based on a simple drop down list

  I'm trying to set up a form so that the two text fields will fill with a text by default (separate for each text field) at the same time.

  Here is a screenshot of the fields.

  Thus, for example, if I select Utah in the drop-down list in 'State', ' OH Fund Center "is automatically filled in with APWSWR4949 and"OH WBS"is automatically filled in with WR49.73.0003.

  

  I have a similar script for down text in form fields, but the script does not work.  I tried the following script:

  var v1 = this.getField("RecState").valueAsString;

  If (v1 == "Utah") event.value = APWSWR4949;

  else event.value = "";

  However, it would not AutoFill OH Fund Center area.  And I have no idea how complete both fields at the same time.

  Any help would be greatly appreciated.

  Thank you!

  Crystal

  Strings must be enclosed in quotation marks. So change your code:

  var v1 = this.getField("RecState").valueAsString;
  if (v1=="Utah") event.value = "APWSWR4949";
  else event.value = "";
  

  If it works, then you can use code similar to your other field.

• How to apply different fonts to text (words) in the same field

  Please help, how to apply different fonts to text (words) in the same field. I want to select text and apply the font, size and color on the selected text in the field, this code below, the setFont method changes all the text in a field (message) of a select statement to the police. Help, please

          message = new AutoTextEditField("","",maxNumChars,editableStyle)
          {
              protected void layout(int width, int height)
              {
                  super.layout(width, height);
                  this.setExtent(550, 250);
              }
          };
          message.setBorder(border);
          message.setMargin(xyEdgeForMargin);
          message.setPadding(xyEdgeForPadding);
          message.setFont(_menuFont);
  

  Just write your edit as field

  SerializableAttribute public class RichEditField extends BasicEditFields

  {

  int [] offsets = null;

  Are police [] = null;

  String text = null;

  RichEditField (label As String, String text, int [] offsets, make police [])

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  Offsets = this.offsets;

  This.font = do;

  Add validation for offsets and text here

  }

  RichEditField (label As String, String text)

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  This.offsets = {0};

  This.font = {g.getDefaultFont ()};

  Add validation for offsets and text here

  }

  / * Here is a method to add customization of fonts as

  setFont (offset, length);

  setFont (offset);

  public void paint (Graphics g)

  {

  g, Clear ();

  for (int i = 0; i)<>

  {

  calculate it according to x, y using offset

  int length = 0;

  g.setFont (do [i]);

  If (i<>

  length = offset [i + 1] - offset [i];

  on the other

  Length = Text.length () - offset [i];

  g.drawText (text.substring (0, length), x, y);

  Super.Paint (g);

  }

  }

  This method is not compiled may have errors and may have many features according to your needs.

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• Add the date and time to a text field when the form is submitted

  Is it possible to add the date and time to a text field where the user is clicking the button of form submit?

  I created a custom send form button and do not use the distribution process to collect the results and would like to have a time stamp of when the form has been sent.

  Thank you!

  Sure. Before your submit order add a command run JavaScript with this code:

  this.getField("SubmitDate").value = util.printd ("mm/dd/yyyy hh: mm", new Date());

  Change the field name or date that required such boss.

• Is it possible for someone to insert a logo when you fill out a form to fill out? I'm looking for all the options under the button 'add a text field.

  I have created a form to fill out that is a contract, but I need a way for the person who is to fill the form to insert their logo.  Is it possible for someone to insert a logo when you fill out the form to fill out? I'm looking for all the options under the button 'add a text field.

  It is not possible within a text field, either. If they have Acrobat, they can use the built-in under Tools - editing content Add Image tool.

  If they drive XI or higher, they can use a button form field you will need to set up for them, but the image must be in PDF format.

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Enter data into both fields at the same time

  This seems like it should be simple, but I can't find anything about it. I am creating a pdf form to fill out, and I need the data in a text field to appear in another text field.

  Example: The form has two sections, one for the applicant to fill in for the office only. There is a field for "Address of the project" in the two sections. The customer wants the address entered in the first field to be automatically enrolled in the second address field.

  How to make that happen?

  If you give the two fields of the same name, they will automatically have the same value. But if you want the second field you can edit independently the first address field, you can use the custom for the first field validation script. If the second field is empty, it will set the second value of the field to the same as the first.

  // Custom Validate script for text field
  (function () {
  
      // Get a reference to the second field
      var f = getField("ProjectAddress2");
  
      // Set the second address field to this field's value, if it's blank
      if (!f.valueAsString) f.value = event.value;
  
  })();
  

  Replace "ProjectAddress2" with the actual name of the field.