Cannot align the bottom edge of the photo with the top of the taskbar on the H - P dv7-4296 running Windows 7

Similar Questions

• Vmxnet3 disconnects abruptly from the vDS on a server running Windows R2 2012

  Vmxnet3 abruptly disconnects the vDS on a server running Windows 2012 R2. When this occurs, the affected server also loses its static IP address for a 169. address.

  Any ideas on what could cause this problem. It happens 2 Wk12 servers in a production environment of servers W2k12 100.

  Hello.

  Have you tried to re-install vmtools and restart on this vm?

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get the Organize Favorites to open in Windows Explorer

  In Windows Explorer, Favorites, organize favorites.  The pop-up window is empty and I can not set up my favorites.  How can I get that back?
  I can see my favorites when I click on Favorites, I get nothing when you click on Organize Favorites.

  Wendows XP Home with service pack 3 installed.

  Hello Ed Abbott,

  Check and see if what follows will help recover your Favorites folder in Explorer.

  This can happen if the Favorites Shell folder is out of adjustment.

  1. click on start.

  2. click on run.

  3. type regedit in run window.

  4. navigate to the following location:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.

  5. Once you find favorites to the title of the first key, right click and select Edit.

  6. the Edit String dialog box opens. The data value field must contain the correct location of your Favorites folder. If it is not the case, enter the right location to restore your missing Internet Explorer Favorites folder

  The value of the Favorites path: %USERPROFILE%\Favorites
   
  7 HKEY _CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell records.
  In the right pane, value the Favorites path: C:\Documents and Settings\nom_utilisateur\Favoris

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot retrieve the songs to a cd error "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

  Oriiginal title: can not extract the songs from a cd

  I have problems ripping the songs from a cd in my windows media player library. Whenever I click "Rip CD" this message "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "How can I fix it?

  Hi littleprincess54,

  (1) have you checked with diffΘrents CDs?

  (2) since when are you facing this problem?

  Method 1: Run the troubleshooter in Windows Media Player settings and check if that makes a difference

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Change the location of Rip. see the steps mentioned in the link

  To change rip settings in the Options dialog box

  Method 3: You can follow the steps mentioned in the link below that relates to a similar question

  Windows Media Player error C00D1197

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• Cannot install the 'Pack Photoshop multifunction I run on OSX 10.7.5 CS6.

  Cannot install the Pack of Photoshop All - Rhapsody «»
  I am running on OSX 10.7.5 CS6 and when I try I get this
  Adobe Extension Manager 12.0 or higher is required

  How can I get a refund

  Please use Extension Manager CS6 and not CC for installation. That should solve your problem, but please let us know if this isn't and send through a screenshot.

• Cannot open the. MSP.crdownload file in Windows XP

  I am trying to install an update to Adobe Acrobat 9.5.1 and it downloads the file has a range of. MSP.crdownload. I'm running Windows XP and it does not open.

  
  
  Thanks for any help.
  
  
  NP

  Hello

  crdownload seems to be a Chrome extension.

  Reinstall Adobe Acrobat and check if the problem persists.

  http://support.Microsoft.com/kb/307895
  http://support.Microsoft.com/kb/305548

  If the problem persists, I suggest you post in the forums of Adobe support for the best assistance.

  http://forums.Adobe.com/index.jspa

• Windows Setup cannot reset the deployment engine. To install windows, restart the installation.

  Background: I bought a new 1.5 TB Seagate Baracuda disk to replace my current 500 GB drive.

  Symptoms: I removed the old drive and installed the new drive.  I try to install Vista 32.  I have spend entering setup, past the disk partitioning key, then get up at installation windows... never goes beyond 0% and this error pops up.  It's a never-ending cycle.

  Information on PC:
  HP Pavilion Media Center
  Model: M8100n
  RAM: 3 GB
  Processor: AMD Athlon 64 2.8 GHz
  Chipset: GeForce 6150SE nForce 430
  Motherboard: ECS MCP61PM-HM (HP/Compaq name: Nettle2-GL8E)

  What I've done so far:
  Update the BIOS & chipset drivers.
  Using the same drive, I can install windows XP without problems.
  Using the same player can I clone my existing to the new player (while it really works, I want a clean install and not a copy of the disc I have with it is that existing space)
  Once I have clone the new drive I can do a fresh install of Vista from above (even once is not ideal and just wasting disk space)

  The problem is that I can't delete all existing partitions, format my new drive and install Vista 32.

  Problem is solved.  I don't have a chance to check the compatibility of the reader, but I found a solution that worked.  It turns out that the problem seems to have been a problem of formatting the drive via the Vista CD.  It's very frustrating when you get an error which is not defined anywhere, especially, a mistake by Microsoft that they document on their support pages.

  Anyway, I would not normally copy / paste an answer, but it's the solution that worked for me that I found on another forum (thanks Mak)

  Download GParted.

  http://sourceforge.NET/project/mirror_picker.php?height=350&width=300&group_id=115843&use_mirror=superb-East&filename=gparted-LiveCD-0.3.3-0.ISO

  Download and burn the ISO with ImgBurn:

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  From there load GParted with the CD in your taskbar. It is a bootable CD. From there, select the partition that you want to install to. right click on the partition and you will see the format option. Choose the NTFS option and format the drive. Then restart with the Vista DVD in the status bar.

  Go through the startup process. It should work now.

  The problem you are experiencing is related to the format. Vista does not have a formatting full it made just a short where it erases the data. The problem is that you have a damaged area on the hard drive that is causing this problem.

  This will get rid of spot and allow installation to complete.

• Cannot use the screen saver Marine Aquarium on Windows 7.

  Original titile: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  A couple of years ago, I bought a screen saver (Marine Aquarium). At the time I was running Windows XP, now I'm running Windows 7 and my program is not compatible w/win 7. What can I do to get my program to work in windows 7? If there is something.

  Hey Alton,

  We would like to know as a result of information from you to help you better.

  (1) have you tried to use the screensaver on your computer?

  (2) you get an error?

  You can follow the steps in the link below and try to install the screensaver in compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Feel free to write us if you still face any problem, we will be happy to help you further.

• Cannot copy the file from pc shaped runtime (windows) using HOST

  Dear all:
  
  I write more code to copy to rename a specified file from a pc to another pc.
  
  PROCEDURE copy_image_file (out_file_name VARCHAR2) IS
  in_file_name VARCHAR2 (100);
  in_file_path VARCHAR2 (100);
  out_file_path VARCHAR2 (100);
  the_command VARCHAR2 (2000);
  BEGIN
  CHECK_IMAGE_FILE;
  in_file_name: = pk_parameter.setting ('IMGSFILE'); - Source file
  in_file_path: = pk_parameter.setting ('IMGSPATH'); - Source path
  out_file_path: = pk_parameter.setting ('IMGTPATH'); - target path
  
  the_command: = 'move' | in_file_path | in_file_name |                                    ' '|| out_file_path | out_file_name;
  
  Message ("Moving File...");
  Synchronize;
  Host (the_command, NO_SCREEN);
  /*
  * Check if the command succeeded or not * /.
  IF this is Form_Success THEN
  Message ('error - file is not moved');
  ON THE OTHER
  Message ("file moved successfully");
  END IF;
  END;
  
  It above coding works fine (managed to pass the file) when I run this code from my own PC (seen developer complete installed), while when I run this code from a Client PC (having occasionally forms run) he executed the successfully but don't move not not the file.
  
  I would like to know the reason for this?
  
  Kind regards
  
  Hassan

  Is this the same thing that Re: check the existnace file before using the HOST command? you forgot to prefix cmd /c in your order I see in your code. What forms version are you on? If you are on the Web, host forms will run on your middle-tier (which is on your developer machine, the same as the customer)...

• Get the 0x8e5e0147 error code when running Windows updates.

  Original title : Cannot run windows live updates on vista pc.

  I have windows vista service pack 2 with 32-bit and that you cannot run the windows updates?  I have 11 of them do and tried one at a time and get the same error for all - 0x8e5e0147.  Can someone help me?

  Hello

  (1) do you have made no changes before this problem?

  (2) have what troubleshooting measures you tried?

  Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

  Method 1: Reset Windows Update components.

  Log on as administrator.

  a. visit http://support.microsoft.com/kb/971058

  b. click Microsoft fix and run successfully.

  c. restart the computer once the tool is run.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Method 2: clean boot

  Download Windows updates when the computer is in clean boot state and install updates

  How to configure Windows Vista to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Lexmark z605 printer does not work with the new computer that is running windows 7

  I plugged my z605 printer (which I had already used quite happy with Windows XP) on my new PC (running Windows 7 64 bit) via a USB port but it failed to install properly, saying: he could not find the driver.

  Action Center directed me to the Lexmark Web site, where he says to download the Vista driver, I did.  CjrZ500 - Z600EN.exe downloaded according to the guidelines, but it still does not solve the problem.

  I tried to manually point to C:\drivers\printers (which is where the Lexmark program appears to have put it), but received a message "Windows found driver software for your device, but has encountered a problem trying to install it."  Lexmark Z500 - Z600 Series, the system cannot find the specified file"

  Problem solved.  Although the site says that the driver Vista and 64-bit Vista driver were both called cjrZ500 - Z600EN.exe, in fact, select the 64-bit driver download cjsZ500 - Z600EN.exe, that worked!

• CS5 does not work on the new computer that is running Windows 7

  I initially installed my CS5 on a computer running Windows Vista and it worked great. I just got a new computer that is running Windows 7, installed my Adobe Photoshop Elements & CS5 on it, but now it is not working properly. When I click on the triangle to the right at the bottom of any tool, it does not to show the various tools as before. Does anyone else have this problem? If so, how to solve it? Thanks in advance for any help you can give!

  Hi FireSpiritDesigns,

  There are two ways to access the tools hidden in your toolbar in Photoshop:

  • Press and hold down the mouse button on a tool that has hidden tools behind it and a window will appear to the right of you show the other available tools.
  • ALT-click Windows or Option, click on a Mac on a tool to jump out the window that shows the hidden tools available.

• Updated for Firefox 4RC and have no capability on the search engines, cause the freezing of the browser, any ideas? Running windows 7

  I am running Windows 7 and have / has done to update various 4 betas/release final candidate. Have tried using various engines without success. I am able to conduct the initial search, the results are displayed, impossible to open links and lose all the features in freezing cause navigation.

  Yahoo, Google, Bing, all are concerned.

  You have McAfee Site Advisor installed, which increases because of problems especially with Google. If you try to disable it to see if Firefox works. Alternatively, you can try to install the latest version (3.3.1) of the Site Advisor, one has to work.

  Mozilla plan on blocking older versions of McAfee Site Advisor Firefox 4 due to the problems they cause.