Cannot be a last layer of puppet frame 3500

Similar Questions

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• Add a new layer as a last layer

  Hi friends,

  How to add a new layer as a last layer in indesign scripting.

  If the Document has 5 layers in this sense, the newly added layer must be the 6th layer.

  Please give some ideas.

  l = doc.layers.Add ();

  l.Move (LocationOptions.AT_END); It will move at the bottom of the layer stack.

• Cannot select the last picture

  Hello

  I have 75 frames in an animation. I have about 6 layers.

  I'm putting a stop on the last image statement.

  Whenever I open the Actions window it says even if image 1

  the playhead is positioned on the last image.

  How to place a stop comand on the last image and which layer

  should I select?

  Thank you

  Jim

  After having selected the last image, right-click on it and select Insert image.  You should now be able to add your stop() command in the last picture.

• Satellite A300 - cannot burn DVDs dual layer

  Hi, I bought my laptop 10 months ago.

  Since then I ve been burning a disc or two every now and then, no intense use of the driver.

  Last week I tried to burn a DVD double layer, my driver seems not to be able to burn a. I used BurnXP free burning software that supports double layer and when he finished the first layer of the program collapsed in response, I have tried 2-3 disk, none worked.
  Then I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.

  I have tried different brands of disc 'TDK' 'Philips' "In extenso" or something. None worked.
  I tried a Philips disc on my desktop drive and it it burned very well.
  -Should I head to Toshiba service?
  -Are there a driver/firmware to fix my problem?

  PS: I tried to update firmware but can't find a firmware for my drive.
  I have the ' matsita DVD-RAM uj-850 s and I used the right type of DVD discs--
  Type in advance.

  > So I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.
  You have received this message, but have you checked the DVD DL after that?
  Perhaps the data has been burned correctly?

  I got a lot of time, the message that the burning procedure was not successful, but I then tested the disc and it was legible.

  AFAIK that should the user manual contains also some info on drive tested and compatible.
  Maybe you should use the DVD DL recommended in this user's manual.

  But of course this could be also a material IRREGULAR deadlines.
  In this case, you must request the ASP for the test and check!

• When a 'design' is done after several layers, one caught last layer, then save them and JPEG to send?  I'm designing greeting cards.

  I need some advice as a self-taught digital artist over the years, I've created illustrations/designs that I hope to sell greeting card companies.  As I work (create) the design I select constantly new layers as I go along and make changes until the final 'Aha' what!  Then I save it - last-finish-layer and also JPEG- like 'ready' to shown.

  I hope this is the right way to do it?   Also once "blew up" design - zoom, up to what there are pixels and then I - clean lines and correct all the tasks of color or bleeding on the lines.   I never know how every last little pixel must be perfect; I happening lately days... will for example the stars I have on a Christmas tree.

  a tree loaded - with gold stars, I saw with #1 thin black line so that they stand out.   This because I have no idea how 'deep' one company looks TO design and what needs to be perfect? for printing of the said design/illustration.   I must confess that until recently but I knew even of the - zoom, to the pixels - and was horrified by first of all to see

  what things in a 'disorder' can be--which is NOT visible to the eye until the ZOOM - shock one!  I'm going to work "depth"?  How much should we go in to, enlarge,

  art.. .in preparation so that I started to explain! a greeting card?

  I'm 75 and started this 'fun' 25 years ago.  I published once by Marcel Schulman - Papyrus, but at that time, it was all done by hand.  After that, I began to ANALYZE what I drew, then work-it via Photoshop.

  Most of the years that I paint with oils/pastels/watercolor...and the 'cards' were a means of - warm, if I'm "stuck" for awhile.  But I find the process fun and very

  relax... Finally, I would like to know what the devil I have do IS what needs to be done so that I can... .go ahead and start sending again for card companies.

  Sorry for taking so much time to explain - and I thank you - if you find that you have the time and energy to answer and help me with these questions!

  Sincerely,

  Cynthia

  I'll be 75 13 dec.

  First of all if you want to sell to greeting card companies know what they want.  If they want a certain size and resolution. You create your art at this size and resolution, or a little bigger.  To resize smaller images work better then resizing image upwards in size.

  You must always save work you as PSD files, so you can continue working on your art. If you do everything.  For the Greating card company save you what ever they want the psd.  Most likely will want a jpeg color space sRGB.  They may however want a CMYK image to a printer. As long as you have your PSD you must be able to create the file they want.

• particle cannot work on a layer of reverse time

  Hello!

  I'm learning after effect and try to make an effect of particle logo (using the particle Trapcope) but when I use "time - reverse layer" I got an error "after effects error: individual cannot work on a time - reverse layer."

  I captured an image.

  

  Before composing the simulation and then tip over.

  Mylenium

• Intro, layer 'AS3 hand', frame 2, line 14 1119: access to property may be undefined, click on by

  The last line of code (found on frame 2) below reproduces this error, why?  Yes, frame 2 has the button on the stage with the name of the instance 'normalScreenClickHandler '.

  function normalScreenClickHandler(e:MouseEvent):void
  {
  gotoAndPlay (5);
  }
  normalScreenButton.addEventListener (MouseEvent.click, normalScreenClickHandler);

  Kind regards

  Ron

  Use CLICK... case questions

• Layers - cannot see all of layer

  I use DW 8 on a PC and try to help a person with his problem of layer.
  
  It uses diapers for his band, the left navigation bar and the main content.
  
  The last ('email') button in the navigation bar is not displayed in firefox or IE. Only, it can be shown by reducing the size of the text.
  
  I use CSS in my sites and am not familiar with the use and the problems of the layers. They seem to be similar to executives.
  
  Could you get it someone please let me know if there is there a simple solution to get his work in navigation bar using its layers, or what I should convert to CSS?
  
  I removed all references of height and changed the z-index from 2 to 99, although I'm not sure what this attribute.
  
  Thanks for your help.
  
  The code for the Navigation bar is attached:
  
  

  He's a beginner, so I would probably go with a provision of a simple table, but use css
  to style the content.

  For what is a quick way to tables, no, it's not I don't think (I'm not one
  user management). But it would not be too difficult. Set up a new page layout
  as required and a quick copy and paste would work. Of course, do not use the
  layers for the menu, simply insert each button in a table cell... as below

  A table for the header, table with 2 columns for the content. On the inside of the left
  Cell, place a table nested for the navigation bar, content on the right. A more
  table below for info links or copyright law.

  That would make it much easier for him to update I think. Keep a
  presentation tabular simple no problem and once he has learned everything that he
  can on css, it can use its own Web site to convert a full css
  Layout - this is the way that I would anyway :-)

  --
  Nadia
  Adobe® Expert community: Dreamweaver
  ----------------------------------------
  CSS templates | Tutorials | SEO articles
  http://www.DreamweaverResources.com
  ~ Available customization service ~
  http://www.csstemplates.com.au
  ----------------------------------------------------

  "pcresolver" wrote in message
  News:f3rprs$PDH$1@forums. Macromedia.com...
  > Hi Nadia,
  >
  > Thank you for the quick response.
  >
  > You know a quick way to get rid of managers? Perhaps by the 'conversion '.
  > to
  > something else? I would have preferred a CSS Div style but a table would be a
  > step
  > the right direction.
  >
  > This is his first web site and if the changes are simple, I can't
  > show
  > it's Hell and that he will do the rest himself. He does not want to learn CSS
  > because
  > It doesn't have the time. A bit of a Catch 22: create a site quickly and pass
  > time
  > put later to the right or take more time to learn and create, but update
  > quickly!
  >
  > Like to move from where it is for the CSS, I think to create a new page
  > and
  > using floating Divs as containers to its existing content. Do you have
  > any
  > better ideas?
  >

• BluRay BDPS3100 network connection problem and cannot remember the last position a DVD was finally play

  Third time, it will not make a network connection. Last two times, I called Sony about the probplem of Youtube, it turns out that it was a Sony problem and a week later, I did a udate software and it fixed the problem. Now for the third time, the device does not connect. Check all the settings and looks good. ??????

  And finally, the unit does not remember where the last stop on a DVD has been in the Middle film.

  Seems that it was poorly designed. I got my 5 years old and it worked perfectly.

  Maybe time to consider other products. Any suggestions?

  Someone has something they want to add?

  To the problem of internet connection, perform a power reset on the player and the router.

  1 turn off the player and the router, and then unplug the power cord for 1 minute.
  2. after one minute, plug the player and router and then turn on again them.

  You help us, please provide more information. How you connect the player to the internet, wired or wireless? Do you receive an error message? If Yes, please provide the exact error.

  For the movie problem, you say you cannot resume the film if you press stop or pause?

• AS creation on a layer actions and frame 1 of the main timeline

  / * Set up files, this program works 'actions are directly fixed on the buttons.
  the instance names:
  ball_mc
  start_btn
  stop_btn
  
  The clip of ball is a simple animation that bounces a ball up and down, I dragged an instance of the latter staging and added ball_mc.stop; for a layer actions, I created in the main time line.
  
  I added the following to the start_btn * /.
  {We (Release)}
  This.ball_mc. Play();
  }
  
  I added the following to the stop_btn
  {We (Release)}
  This.ball_mc. Stop();
  }
  
  This program works. I simply press the start and stop buttons. And the clip ball_mc instance
  symbol start / stop when I press buttons.
  
  / * I'm trying to access the same buttons through the main time line. I have put all my actionscript on frame 1 of the layer and the same 'a layer called actions' layer actions. Here is the code I tried, but the ball_mc will not start or stop. Here's the code I used: * /.
  
  This.ball_mc. Stop();
  This.start_btn.onRelease = function() {}
  This.ball_mc. Play();
  }
  This.stop_btn.onRelease = function() {}
  This.ball_mc. Stop();
  }
  
  I hope that I'm not asking something as stupid, I tried just about everything I could. That's why I ask your help now.
  
  Thank you
  Dennis

  remove the 'this' (s) of your codes:

  ball_mc. Stop();
  start_btn.onRelease = function() {}
  ball_mc. Play();
  }
  stop_btn.onRelease = function() {}
  ball_mc. Stop();
  }

  'this' inside a function can refer to the object assigned to the function.

• Export PNG with the correct name, for each layer, script file frame foreach

  Hello guys,.

  I am trying to find a script that exports each separately from the layer in PNG, for each image, with the correct name. By example, if the layer is named snail and lies in a forest of group name and is like 6, export this layer as a PNG named forest.snail.06.png (recursion if possible) and this for each layer, for each image...

  I found a software named Layerex, they speak here about layers export Flash | Global Facilitation network

  But I could not find... If you guys know how to do, it would be so awesome...

  Take care

  Simon

  Using jsfl.

• Bug? : cannot execute predefined "last awr" report with the latest version of the SQL Developer

  Using sql developer before 4.x... report works fine

  Using SQL developer 4.0.0.13... report fails with ORA-01422

  using the actual query to generate awr against the same range of component snap works perfectly

  I opened a SR on the question

  Thank you

  It's always a good idea to open a SR when you are able.  I assume that you have already received a response from support.  For others I wondered about this, the question is likely related to running the report against a CCR environment, as indicated in the following bug:

  Bug 18132564 - LAST AWR REPORT FAILS WITH ORA-01422 IN CCR ENVIRONMENTS
  

  The call of the AWR report requires parameters for a DB and an ID of Instance, so that the report should run, as in earlier versions, for only the current instance, or be modified to run all instances in the cluster.

  Kind regards

  Gary

  SQL development team

  P.S.: And, in fact, a discussion prior forum - ai2 4.0-AWR and ASH giving ora-01427

  lead following bugs are connected and supposed to be fixed for SQL Developer 4.0...

  
  

  Bug 17481944 - PERFORMANCE PANELS NEED AWR/ASH/ADDM FOR RAC ENVIRONMENTS SUPPORT

  
  

  ... with the developer commenting

  I've added a number instance selection control to the various reports: ASH,.
  AWR, difference and SQL. The control is supposed to be visible when the
  connection is a RAC system, tests should a RAC.

  So if you are not on a RAC system, or are on CARS but do not see the selection number instance control, please let us know.

  Post edited by: Gary Graham

• You cannot change the text layer

  I am trying to change a word in a layer, but whenever I click on this word a new layer comes and I can't access the text in the layer I want.  What I am doing wrong?

  According to the guidelines of the screenshot you provided, it seems the text layer was rasterized or flattened, you can't get back to edit mode.

  ~ UL

• Cannot create a new layer (was: problem with programme)

  Flash CS6 doesn't let me choose text tool... computer laptop asus

  Create a new layer.

  Select the text tool.

  any problem?