Satellite A300 - cannot burn DVDs dual layer

Similar Questions

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Satellite L300D cannot burn DVDs

  I have Satellite L300D and Ii took about a year, but I have never tried to burn DVD s. Now I can burn and read CDs perfectly and s DVD playback, but when it comes to s DVD burning it have problems as supplied with the laptop Toshibas program does not work for burn DVD s and other various programs such as Nero and imgburn do not work. I always get write error and other things. Told me it was the discs, so I went and spent money for verbatim DVD's instead of cheap ones and there are still some coasters of each disc, I am trying to burn my DVD burner is

  HL-DT-ST DVDRAM GSA - T50N ata device

  Can someone help me please have tried everything restoring my settings to factory when I bought the laptop as nine and still no joy desperately need help.
  The answers lol?

  Have you tried to create recovery DVDs using the preinstalled Toshiba recovery disc creator?
  Please test with Verbatim DVD - R blank.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• Re: Satellite A200 - cannot burn DVDs

  I had a Toshiba Satellite A200 for several years and have never had a DVD burning problem before.

  About a week ago when I tried to burn a DVD with Nero, he went through the motions and was told everything had been done successfully, but when I went to read the DVD, the computer told me that it was a blank disc.
  I tried to use different programs to burn on DVD, with the same result every time. My DVD drive is a TSST corp CDDVDW TS - L632H ATA Device. He can still play the DVD already made and play, then I start to think that the party "burnery" (I'm fine with the techno jargon) has made his dash.

  Does this mean I need to replace the drive?
  All the answers you guys could give would be greatly appreciated, it has become a bit frustrating.
  See you soon

  First try to remove upper and lower filters: http://support.microsoft.com/default.aspx?id=314060

  Second, make sure that there is no dust on the lens, use a Microfiber cloth to gently wipe the optical lens.

  Third, look for a firmware updated the L632H drivers Toshiba Web site.

• Satellite A300 cannot start DVD

  Hello

  Today, I tried to reinstall my win7. I managed to reinstall using setup.exe in windows, but for installation clean (with formatting), I need this dvd to boot. When I select dvd to start, it does not show the message "press any key to boot...". ', show just flashing dashboard on black screen while the dvd system makes noise like its dvd playback. But after CCA 30 seconds, it load currently installed win. I also tried to change the order in the start menu. Nothing helps.

  I'll be grateful for any advice.
  Kind regards.

  Hello

  You try to use the original Microsoft installation disc or disk installation of self-made?
  Have you tested your A300 with some other bootable discs?

  Start your machine and press F12. When you see the boot on the screen menu, put the Windows installation disc into the optical disc drive, choose the CD/DVD option in the menu and press ENTER.

• My Satellite A100 cannot burn DVDs

  I have a rug * a DVD-RAM UJ - 841S who is really fighting with burning discs. Although the system recognizes the drive Ok when I go in WinDVD creator or Roxio there is no disk selected and no to select. It seems that none of my burning software does not recognize the drive. Any ideas?

  Hello

  What to say! Pre-installed images are tested and if your device has a factory settings, it should work fine. If I remember correctly, the set comes with the NOW called RECORDING of SONIC burning software. I hope you have tested before use of Roxio.

  Try to remove all the burning software, install Nero and test it properly. Sonic and Roxio maybe some conflicts and engraving option is not available.

• Satellite Pro A300 - cannot write DVD

  Hi all

  I have a Toshiba Satellite A300 with PIONEER DVD - RW DVRTDO8A; Version 1.54 and after 2 years usingIi FW start having problems with the DVD the DVD because no desire to write.

  Maybe someone can help me?

  Hey Buddy,

  You still use another brand of DVD? Some brands could not be compatible with your player. I made good experiences with DVD-R (not DVD + R) of Verbatim and TDK. Both brands are working well and never had any problems.
  Did you check that?

  What burning software do you use?
  I use CD Burner XP because it s nice and little freeware tool.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• (Redirect) DELL XPS 8700, the dvd burner burn discs dual layer

  Hello

  I think of buying an XPS 8700, can someone tell me please, the dvd writer has to burn dvd discs dual layer (dvd9 8.5 GB) thanks in advance.

  Hi bigkevin,

  I don't know if this is the case. I'll have you repost this in the forum Office for a more expert opinion.

  http://en.community.Dell.com/support-forums/desktop/

• Cannot burn DVD-R with my Satellite P100-342

  I bought a Satellite P100-342 two years ago. Some time after I tried to burn DVD + R and it was impossible, so I sent it to Toshiba. A few weeks later, when they returned to my laptop I saw that I can burn DVD + R, but it was not possible to burn a DVD-R.

  I tried with many manufacturers of DVD - R, but no one works.

  I checked my DVD multi recorder (HL-DT-ST-DVD RAM GMA-408N) with Nero Info Tools and it checks ON items: DVD + R and DVD-R. It shows that system ASPI are not installed and I don't know if that's the problem.

  My OS is Windows MCE.

  Will you help me, please?

  Hello!

  This DVD did you tested on your laptop?

  I use discs Verbatim always and never had any problems with it. You may also try verbatim and post workout.

  Good bye

• Satellite M45-S169 - Sonic v.7.31 cannot burn DVDs more

  I am using a v.7.31 Sonic Record now prepackaged on my Satellite M45-S169 for three years now.
  I was able to copy DVDs using this software.
  Until recently, it burns more.

  What's most frustrating is that space of memory on a blank dvd just exhausted once I try to burn dvd on cd files.

  Help! Help! Help!

  Hello

  Have you tried to delete upper and lower filters in the registry of the Windows operating system?
  Isn't it? Try this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Also I would not recommend trying the other and different discs (CD and DVD) from different manufacturers.
  But of course it could also be a hardware problem. I mean the discs of the laser lens has stopped working properly due to mechanical stress.