Add a new layer as a last layer

Similar Questions

• When dragging a file icon to add a new layer

  Classroom in a book lesson 4, page 105

  When you drag an icon from a file to a Photoshop file open window I get a circle with a diagonal line. i.e. it does not allow me to move/create a new layer.

  Am I missing something?

  Thank you

  Thanks for the reply!

  Yes, to answer your question. But I think I found the problem.

  After installation of Ps I've updated. At the end of the update, he said that one or more update programs "may" require a reboot. Since none of the programs said it wanted a reboot I have not.

  Just to smile and laugh, I rebooted corrupts. After a reboot, I was able to drag files into the window of PS. Yes!

  Moral of the story, if the update program says "may require a reboot" interpret this as"will require a reboot".

• How to add a new layer?

  Need help with a school project!

  CTRL-V or cmd - J according to your computer will duplicate a selected layer

  Shift-ctrl-N or cmd-SHIFT-N will create a new empty layer

  In turn just click on create a new icon of layer at the bottom of the layers palette next to the trash to make a layer of vacuum

  Drag a layer to the same icon duplicate.

  Terri

• Cannot add the new layer

  It must be something simple and stupid.  Using Elements 8, here's what I do:

  (1) using the main menu, click on "file / open".

  (2) (select a RAW Canon file (.)) CR2)

  (3) file open in Camera Raw

  (4) on the Camera Raw dialog box, click on 'Open Image'

  (5) camera Raw dialog box closes, image opens in the main window of photoshop

  (6) at this point, using the main menu, select "Layers."  All entries are grayed out (disabled).

  (7) the Lyers palette is also non-functional.

  Huh?

  As I said this hads to be something simple and stupid, I scanned the docs online, searched google and adobe forums.  Can't find anything about it.

  Any help appreciated.

  Mike

  The reason is most likely because you opened your file converted to 16-bit mode, which does not support layers.

  Either during reprocessing in ACR while checking the output to 8 bits (in the middle of the bottom bar menu)

  Alternatively, convert to 8-bit in PSE editor edit menu/mode... 8-bit.

• Position of the object changes with the new layer

  After Effects CS6 11.0.4.2

  I have installed recent updates, according to this page (FAQ: what information should I provide when you ask a question on this forum?)

  10 Pro 64-bit Windows

  I have an AMD FX (tm) - 8350 eight cores 4 GHz processor

  8 GB RAM

  AMD Radeon 200 series graphics card R9

  3rd party plugins installed: 3-d element.

  I have an object made to 3D element bound to a null object to control its movement. The position that there is everything I like. However, when I add a new layer (layer setting, sound, text or other) changes the position of the null object. It comes to a lot of trouble because I use 3d objects and as they occupy a different position, their movement seems wrong.

  I wanted to add an adjustment layer, so I précomposé just what I have and add the adjustment to the model layer, so it does not change. It worked perfectly. But, now, I want to add a new text object, bring it to feature 3D extrude it and bind it to a null object, the problem is that if I add the null object, or the text layer to the original model, the previous objects will change their position.

  I use phrases such as wiggle and time * with the first null object. This has something to do with that evil?

  How can I solve this problem?

  Thank you

  Yes. The seed of wiggle() and other Pseudo-aleatoires functions is obtained according to the index. You must manually set a seed with seedRandom (< your="" value="" here="">, true) to avoid tampering. This is nothing unusual.

  Mylenium

• New layer on a mask layer causes problems

  I have a layer mask that shows/loads a flv imported inside.

  the hidden layer has an empty picture-key with the following code in it...

  var myLoader:Loader = new Loader();
  addChild (myLoader);
  var url: URLRequest = new URLRequest ("mymovie.swf");
  myLoader.load (url);

  What happens when I add a new layer to my main flash, just above the mask layer film, would damage the film. Instead of loading in the mask, it loads above all. Why does this happen?

  When you dynamically add things on the stage, they don't have a house in the timeline panel.  In addition, place the code in a particular layer does not designate this layer containing some content could process the code.  You will need to do is dynamically mask is added to the content loaded or load content in a MovieClip (a blank) you set manually in the layer being masked... (using movieclip.addChild (myLoader)... metaphorically speaking)

• Add a new item to the PSD file makes the puppet to stop working correctly in c.

  Hello

  I am trying to add a new layer in my PSD file - just put a hat on the head of puppets.  Now, when I save the PSD and reassemble the hat in the ch is displayed but all of a sudden the arms fold is more correctly.  They teleport just whole body when I drag around.  It's very frustrating!  I'm doing something wrong?

  If a puppet 'Islands' (i.e. only parts) within a single mesh, Ch will automatically switch the mesh to be rectangular to encompass all the Islands (otherwise they would disappear). If this is your problem, you can see which parts are islands by switching the mesh shape popup in the properties panel (with one of the selected layers in the Panel of the puppet) to outline instead of Auto. The Islands will disappear when viewing the puppet in the places Panel. If you really want the group as an island, it's OK, just check the option to deform independently and giving it his own net.

  Check show Mesh at the bottom of the puppet Panel can also help to solve this problem.

  We are working on what is more simple to use.

• I have a background image.  How can I add an image to the new layer?

  I have a picture as locked background.  When I create a new layer, how can I put a new photo on the new layer?

  File > place bound to add image (press ENTER after you have size and position) and it will become a dynamic object on its own layer.

• Motion tween adds new layer

  I get rather belatedly faced with the new system of interpolation introduced in CS4.  To be honest, it was a nightmare, but I'm starting to see its good points now.

  One thing that always makes me crazy is when you create a new Tween and Flash creates a new layer for you and puts the interpolation inside.  Why?  And how he stop?  During an animation of 10 min with a lot of preteens I could end up with hundreds of layers!

  THX.

  It creates a new layer when you have selected. This is because you can not interpolated element and non-interpolated on the same chassis (you can have non-interpolated elements on the same layer, but not shared image - as with any interpolation).

  If you don't want to create a new layer, make sure that all is selected on that frame and it will create on the same layer.

  Jen.

  PS: This guide can help: http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html

• Lasso and new layer

  I'm new to photoshop, but for these last days, I used the lasso tool then check J to create a new layer and modify this part of the image.  Today, I use the lasso tool and control J and it creates a new layer, but only shows the grid and the contour - nothing of the image appears.  I also tried the lasso tool, then do a click right, then new layer and copy but still just the grid and contour.  Why it does not now or how to operate again?

  Hi Jeannie,

  You follow a proper workflow.

  Please follow the steps and see if that helps.

  > Use the Lasso tool to make a selection

  > Click on layer > new > Layer via Copy

  > Check if it is create a new layer with the selection or not.

  Also, please post a screenshot of the interface of Photoshop after having used the shortcut.

  ~ UL

• best way to add a CURVES layer

  Hi all

  I am writing to you the best way to add an ArtLayer with a script.

  I already know that it is possible to add an Artlayer, and then change the layer.kind to the TEXT property.

  But unfortunately it is not possible to add change this property to LayerKind.CURVES.

  
  

  Here is an example

  /**
   * Function to add a layer to a Document
   * @param {LayerKind} layer_kind, the type of the layer (CURVES, TEXT, SELECTIVECOLOR)
   * @param {Document|LayerSet} [obj = app.activeDocument] the obj which contains the new layer
   * @return {ArtLayer} layer the added layer
   * @todo add a better test to check if layer_kind is an enum of LayerKind
   * @toto add control the layer is background or not
   * @todo https://forums.adobe.com/thread/1601245
   */
  my.add = function (name, layer_kind, obj) {
  
     if (obj === undefined) {
     var obj = app.activeDocument;
    }
  
     if (typeof layer_kind !== 'object') {
     throw {
     name: 'InvalidArgumentError',
     message: 'you must enter a valid value for the param layer_kind [CURVES, TEXT, SELECTIVECOLOR, etc.]',
     fileName: $.fileName,
     lineNumber: $.line
     };
    }
  
     var layer = obj.artLayers.add();
  
     layer.kind = layer_kind;
     layer.name = name;
  
     return layer;
  
  }
  

  So the only way to add different type of layer should use listener Action Script?

  I'm a little confused, because it would be much better to be able to change the layer.kind property.

  In advance, thank you very much for your help.
  Best account.

  Don't forget your does not deal with Adobe here it is the user forums.  If you want changes made to Photoshop scripts that you need to address Adobe please use Photoshop family customer community and submit a suggestion.

  Adobe DOM is limited without Manager Action code via ScriptListener Photoshop script script is not very useful because limited methods of model DOM of Adobe Photoshop. Many Photoshop features are not supported and the supported features can be supported in a limited way.

• Clone Stamp tool works is not on the new layer

  I created a new layer and tried the on this new layer Clone Stamp tool to us, but it won't work. It will work on the background layer, but not the new layer, that I created. Please help, it drives me crazy. I use the last photoshop.

  Looks like you beat me, Chuck!

  Mine works fine on current and below.

  

  Try a reset of the tool:

  

  If this fails, try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  Benjamin

• When I click on light effects, it simply creates a new layer, and I can't really change/tweak the enlightenment... help

  Photoshop lighting effect filter does not work. A new layer called just the effects of light appears, why?

  Under help > system info, copy and paste the first two lines identifying the exact version of your OS and Photoshop.

  In Photoshop, the command is the menu Filter > render > lighting effects

  Don't use "Last filter" or it runs the command without bring to the top of the dialog box.

• Why not first pro cc won't let me add an adjustment layer

  Why not first pro cc leaves me not to add an adjustment layer

  I guess just because you have not provided a lot of information, but most likely, you try to create the adjustment layer in the Menu file, without having to focus on the project Panel. If you select the project Panel, and then file > New > adjustment layer must be available. You can also create the adjustment through the new button layer in the project Panel.

• Place 2 objects in a new layer and rename it that layer

  Hi all

  Have a small problem and need your help:

  -J' have an AI with hundreds of items in there. All in a single layer.

  -There are two types of objects: blocks and textlayers (numbers). Each block has so a number on top it is.

  

  What I ultimately need is a new layer structure:

  -Each object + textlayer must be placed in a separate layer, AND that a new layer should be renamed the number which is within that layer. Like this:

  

  My first thought was to collect items from its position. For example: Position the text object can be placed at x and are coordinated from the block, but + 2mm for margin offset. What would be the point of recognition for the script to put in the separate layer.

  Or look for bunk objects and put them in a new layer.

  Also found something that can work with existing scripts if it can there have written an extra:

  Here is a script for the conversion of groups in layers and keeping the group names:

  http://forums.Adobe.com/thread/892733

  Here is a script to make groups of objects that overlap:

  http://js4ai.blogspot.be/2008/04/new-script-group-overlapping-objects.html

  In theory if there is a script to change the names of groups with names textlayer, then would solve the problem in these three steps.

  Does anybody know a solution for this? I'm not a developer, know almost nothing about the coding.

  Thank you!

  Here you go,

  What is this for? just curious

  #target Illustrator
  
  //  script.name = moveText_n_Box_toNewLayer.jsx;
  //  script.description = custom script to move a path and its INSCRIBED label to a new layer
  //  script.requirement = CS5+ only, one open document, one artboard, some rectangles and text labels inside them.
  //  script.parent = carlos canto // 03/31/14
  //  script.elegant = false;
  
  //  http://forums.adobe.com/thread/1440702?tstart=0
  
  var idoc = app.activeDocument;
  var abRect = idoc.artboards[0].artboardRect;
  var tempAB = idoc.artboards.add(abRect);
  
  var tfs = []; // text frames container
  
  for (j=0; j