Cannot be saved on a remote server on a site...

Similar Questions

• Problem with opening of library saved on the remote server. Can anyone advice please?

  I saved the library on the remote server. When I try to open it, I get the following message:

  "Libraries cannot be saved to this location. . The format of the selected hard drive or network volume is not supported. Select another location. »

  Can anyone help please?

  I don't think I have made it clear that the problem is with iMovie on iMac ElCapitan 10.11.3 running. Thank you

• Cannot call a VI of remote server

  I have a VI running on a computer of labview (Labview 2010) development, the main function is handling excellent report using Report Builder. I followed the link http://www.ni.com/white-paper/14469/en to configure labview and teststand machine respectly. But when I tried to call the VI of the remote server, it is still not able to load the front panel of VI and show the connectors. See attachment. Looks like he's always trying to load local drive VI because it cannot find the subvis built-in for report generator function.

  What should I do to make this work? Thank you!

  For those who are interested in the solution, the problem turned out to be two things.

  The first is that if you want to be able to load a prototype of the VI in TestStand, you will share the VI or create a dummy VI. If the commune VI using subVIs that you do not have access, then you better create a dummy VI which has shutters connector.

  The second problem has to do with the way the remote path of the VI has been specified. If you shared the VI, then you will enter the path of the shared folder in your remote path of the VI. If you haven't shared it, then you will need to enter the path of the VI as it is on the remote machine.

• question of remote server in the site Configuration dialog box.

  Hello

  I received client ftp information so that I can connect to its server to download files.

  The new CS5 box installation site is a bit different (hard)...

  I set up the folder on my desktop to download and set up the site (directions).

  Problem: under the "Servers" tab, there name address remote connection and tests... mine has two lines of info.

  The top one is my ftp from my personal site.

  Below, it is the only one that I created just to get the download and I gave her a false name.

  I have to remove the top? Because when I go to download it downloads files in my personal site - not customers. Or, should I uncheck "remote" from the top and activate at the bottom.

  I don't want to affect my site at all. Please explain how this new method works... How can I control + choose what server I want content to download from.

  I mean, if I had to remove this dialog box mine, then switch back to the my site dialog box, my connection to the remote server are deleted as well?

  Thank you!

  Too bad. I have it.

  I hesitated to experiment, but it seems that you can select a "remote" at the same time, so all I had to do was click on the customer.

• cannot download/upgrade to a remote server (hack residue)

  I was put/download files BC when everything stopped.

  I have cleared my browser cache thought that would fix the message:
  Deamweaver is currently interacting with the server...
  Please try again when the task of the server is complete.

  My dialog box is grayed out and when I go to
  "Menu/manage sites", I get the same message:

  Deamweaver is currently interacting with the server...

  Please try again when the task of the server is complete.

  
  

  At this point I'll start all over again if my file is corrupt but how?

  Close to Dreamweaver.  Reset.

  Nancy O.

• Draemweaver CS5.5; How to designate a remote server for web site folder

  Having a complete website built w / DW CS5.5 who I am trying to load on my GoDaddy hosting account. Site uploaded to the root directory of my GoDaddy account instead of the 'public_html' folder in the folder root. Want to re - download the 'public_html' folder, but there is no apparent provision in DW to point the upload to a specific folder (i.e., public_html) in the root directory of my account.

  On my GoDaddy website management page, I can spend my file root GoDaddy files downloaded in the public_html folder subordinate, but have to make an image file/t once (against a folder of files). It's a ton of shots, but more importantly, moving them individually will break all the links, so is not an option.

  Any ideas how to target the "public_html" folder in my folder root so I can re - download site here?

  Site > new Site or manage Sites.  See screenshots.

  

  Servers: In your case, the root directory is public_html / htdocs not.

  

  You should NEVER see the root directory in your local files Panel.  If you see in the local files Panel, your site is not properly set and you probably duplicated this folder on your server.

  Nancy O.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• Cannot delete the file on the remote server (Business Catalyst)

  Hi, I am trying to delete a file on my remote server (Business Catalyst), but I get an error message (log of the errors below).  I can delete the other files in the same folder.  In addition, the permissions are the same on the files I can delete and one that I can't.  I can not remove this file with FileZilla, either - get a similar error message.  Any help will be greatly appreciated.  This is a template file and I really need to be able to delete or modify it.  Thank you.

  Started the: 09/01/2016-15:39

  Path is: /Templates/index_desktop.dwt.LCK

  Path is: /Templates/index_desktop.dwt

  /Templates/index_desktop.dwt - error - year FTP error - can't delete the file remote index_desktop.dwt.  Access denied.  The file exists may not, or there could be a permission problem.

  Hi Nancy,.

  The model was the one that I uploaded myself and I need to be able to make changes or delete it.  I have to go check out my Business Catalyst site and figured out I could delete templates through the Site Manager > Page Templates dialog box.  Thank you.

• Cannot ftp to remote server, even if connection tests successfully

  I'll put up a site in 2014 CC DW and I set up my site as the server (using .php with MAMP PRO) test and adjustment to the top of my remote server with my host. (In the past I made changes in DW and serving Transmit FTP) I copied my settings of transmission and copied in the settings of server remote from DW and got a successful test. I created a test file and clicked on 'Put', but the file does not appear on the remote server. Flying over my mouse Put indicates that DW puts my test file on the Test Server, which is really just my local site. I want it to go to my remote server. I clicked on disconnect from the test server think that could force him to go on the remote server, but that did not work. What I am doing wrong?

  Thank you

  Randy

  Expand your files Panel.

  Click Connect to the remote server icon.

  Nancy O.

• Cannot upload files to remote server

  I have a connection checked FTP in Dreamweaver CS6 to a remote server, still can not download files.  Message is always: WAITING FOR SERVER followed shortly after OPERATION CANCELLATION.

  All articles read so far seem to focus on the FTP connection problems, which doesn't seem to be my problem.

  Based on Filezilla at the moment, but it's less convenient than downloading files modified directly from Dreamweaver to the remote server.

  .. .and the winning bet in the "Other Options" submenu was:

  Tagged: "use FTP performance optimization".

  Without label: all other options.

  It seems that "Use passive FTP mode" was in conflict with "use FTP performance otpimization mode."

  Thanks to all for giving time to solve my problem.  Happy days!

• Startup error 'cannot locate remote server ".

  Recently installed PSE 5 on laptop running Win 7; message received "successful Installation".  However when I run the program a message appears "unable to locate remote server, http:/// ."

  ??? %12?%C3%af????????????????????? 12. 12%? g

  Has anyone seen this one? What should I do?

  KC

  It should declare 5.0.2 (before the build number is listed). Try to download and install the update here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569

• Cannot publish or 'put' files to a remote server

  Dear all,

  I can't publish my Web site to the remote server, even if everything seems to work properly with the connection to the remote server.  No error message and the successful login message appears.  I emptied the cache of Safari but still do not see the updates on the site.  I work with Dreamweaver CS5.5 on a Mac Pro with Snow Leopard 10.6.8.  Very frustrating.

  Small town Gal

  Dear all,

  I solved the problem.  For some reason any Netsonic created an another subfolder in my root file and everything has been publish to this file as instead to replace the old master file directory.  When I saw what was going on in the file from the remote directory, I sent my file 'put' in the new file that had been created and everything worked fine. Furthermore, 'public_html' did not work as a root directory, either - but the problem is solved, it's essential. Thanks to all who responded.

  Small town Gal

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Win7 log in problems: "the referenced account is currently locked and cannot be saved in.

  I've seen a few posts related to this error, but nothing of quite like what I feel... My service company COMPUTER is perplexed and they have tried a bunch of stuff at the end server without result, so want to recreate the image on my computer, I don't want to just cause it's a pain.

  I have 2 computers in my workplace. A desktop and a laptop both running Win7 that connect on the server in domain of companies. I use the same username and password for both, of course.
  The problem is with the laptop. Occasionally when I try to log in, I get a notification "the referenced account is currently locked and cannot be saved in" and I can not connect. However, if I unplug the network cable and try it, it works. If I plug the power cable back in and lock the computer, restart the whatever, I can connect properly. However, after a few hours or days, it does the same thing.
  So I'm not completely locked out of the system. It's really annoying to have to disconnect the network like that.
  It has not always done this... It allows to work very well, but it seems to have just started for no apparent reason. The main difference between laptops and desktop, is that the laptop has Symantec PGP Whole Disk Encryption, while the office is not.
  Any thoughts on what may happen and what can I do about it?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question