Cannot call a VI of remote server

Similar Questions

• Cannot be saved on a remote server on a site...

  Hello... Today, on one of my clients sites my finger slipped and I hit accidentally F12... therefore, it won't save to the remote server by hitting save. It says Server error / remote ftp is not found. It - don't - connects to the remote server very well when you use the Connect button to test on the remote adjustment dialog box. Fortunately only this site is affected and they are gone in Michigan for a week. We speak of the version 8.0.2 on XP. What happened exactly? How can I reset it back to normal?

  Murray... it is resolved! Sorry to be a dunce. It seems that somehow I put it to a type of configuration... test server then I hit something else than I thought. I've disabled access to the test server and changed the point of view, and he now works as before.

  My apologies to you... and eslse... and thanks for being there everyone.

• cannot download/upgrade to a remote server (hack residue)

  I was put/download files BC when everything stopped.

  I have cleared my browser cache thought that would fix the message:
  Deamweaver is currently interacting with the server...
  Please try again when the task of the server is complete.

  My dialog box is grayed out and when I go to
  "Menu/manage sites", I get the same message:

  Deamweaver is currently interacting with the server...

  Please try again when the task of the server is complete.

  
  

  At this point I'll start all over again if my file is corrupt but how?

  Close to Dreamweaver.  Reset.

  Nancy O.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• Cannot delete the file on the remote server (Business Catalyst)

  Hi, I am trying to delete a file on my remote server (Business Catalyst), but I get an error message (log of the errors below).  I can delete the other files in the same folder.  In addition, the permissions are the same on the files I can delete and one that I can't.  I can not remove this file with FileZilla, either - get a similar error message.  Any help will be greatly appreciated.  This is a template file and I really need to be able to delete or modify it.  Thank you.

  Started the: 09/01/2016-15:39

  Path is: /Templates/index_desktop.dwt.LCK

  Path is: /Templates/index_desktop.dwt

  /Templates/index_desktop.dwt - error - year FTP error - can't delete the file remote index_desktop.dwt.  Access denied.  The file exists may not, or there could be a permission problem.

  Hi Nancy,.

  The model was the one that I uploaded myself and I need to be able to make changes or delete it.  I have to go check out my Business Catalyst site and figured out I could delete templates through the Site Manager > Page Templates dialog box.  Thank you.

• Cannot ftp to remote server, even if connection tests successfully

  I'll put up a site in 2014 CC DW and I set up my site as the server (using .php with MAMP PRO) test and adjustment to the top of my remote server with my host. (In the past I made changes in DW and serving Transmit FTP) I copied my settings of transmission and copied in the settings of server remote from DW and got a successful test. I created a test file and clicked on 'Put', but the file does not appear on the remote server. Flying over my mouse Put indicates that DW puts my test file on the Test Server, which is really just my local site. I want it to go to my remote server. I clicked on disconnect from the test server think that could force him to go on the remote server, but that did not work. What I am doing wrong?

  Thank you

  Randy

  Expand your files Panel.

  Click Connect to the remote server icon.

  Nancy O.

• Cannot upload files to remote server

  I have a connection checked FTP in Dreamweaver CS6 to a remote server, still can not download files.  Message is always: WAITING FOR SERVER followed shortly after OPERATION CANCELLATION.

  All articles read so far seem to focus on the FTP connection problems, which doesn't seem to be my problem.

  Based on Filezilla at the moment, but it's less convenient than downloading files modified directly from Dreamweaver to the remote server.

  .. .and the winning bet in the "Other Options" submenu was:

  Tagged: "use FTP performance optimization".

  Without label: all other options.

  It seems that "Use passive FTP mode" was in conflict with "use FTP performance otpimization mode."

  Thanks to all for giving time to solve my problem.  Happy days!

• Startup error 'cannot locate remote server ".

  Recently installed PSE 5 on laptop running Win 7; message received "successful Installation".  However when I run the program a message appears "unable to locate remote server, http:/// ."

  ??? %12?%C3%af????????????????????? 12. 12%? g

  Has anyone seen this one? What should I do?

  KC

  It should declare 5.0.2 (before the build number is listed). Try to download and install the update here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569

• Cannot publish or 'put' files to a remote server

  Dear all,

  I can't publish my Web site to the remote server, even if everything seems to work properly with the connection to the remote server.  No error message and the successful login message appears.  I emptied the cache of Safari but still do not see the updates on the site.  I work with Dreamweaver CS5.5 on a Mac Pro with Snow Leopard 10.6.8.  Very frustrating.

  Small town Gal

  Dear all,

  I solved the problem.  For some reason any Netsonic created an another subfolder in my root file and everything has been publish to this file as instead to replace the old master file directory.  When I saw what was going on in the file from the remote directory, I sent my file 'put' in the new file that had been created and everything worked fine. Furthermore, 'public_html' did not work as a root directory, either - but the problem is solved, it's essential. Thanks to all who responded.

  Small town Gal

• invoke VMScript unable to connect to the remote server

  I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.

  On PC1, I can run the script

  invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".

  and it works very well and gives me a result.

  If I run the same command on PC1, I get the error:

  Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server

  on line: 1 char: 1

  + Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript

  Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.

  Thank you!

  The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/

• Problem with opening of library saved on the remote server. Can anyone advice please?

  I saved the library on the remote server. When I try to open it, I get the following message:

  "Libraries cannot be saved to this location. . The format of the selected hard drive or network volume is not supported. Select another location. »

  Can anyone help please?

  I don't think I have made it clear that the problem is with iMovie on iMac ElCapitan 10.11.3 running. Thank you

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• How to install a .bar file hosted in a remote server on device BlackBerry 10 Dev Alpha

  I port an Android application for BlackBerry using Android Runtime. I can install this application successfully using Eclipse. Now, I want to only those files (MyApp.bar) in a remote server deployment and download the .bar using a file browser and install it to another device BlackBerry Dev Alpha 10. I was able to download but cannot install the .bar file. What should I do?

  In fact This is the kind of method I get. Google Chrome Extention (PlayBook App Manager) did the job perfectly.

• csutil to remote server from acs

  Hi all

  Can I run csutil my machine remotely to access another acs Server?

  Hello Tatiana,

  Do not know if I understood your question, but you cannot access CSUtil app from the server that runs the ACS service, so you have to console/RDP to this area in order to to use. Not to mention that this app is only to retrieve information about the server or add vendor-specific attributes, but it is not an option in CSUtil which will allow you access a different ACS. Here's the documentation where you can check how to use it and what you can do with it:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_CSUtil.html

  Let me know if it helps