Cannot change the passphrases for wireless network after upgrade

Similar Questions

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Cannot change the password for my wireless connection

  The wireless router has changed the key and I need to change the key/password on my windows computer 7, but it is not letting me.

  Usually on other computers, you can right-click the connection wireless from the taskbar and it will give you options of 'Connect' and 'Properties' (and you can change it in the properties).  But on this computer, there is no 'Properties' option, simply connect.  How can I get the Properties tab?

  You use a third-party wireless instead of Windows Manager? If to check with the manufacturers support site or your user manual for assistance to change the properties of the wireless network.

  You could also, last spring, just remove the existing profile and then re-create it with the new encryption key.

• Satellite L510 - how to install the driver for wireless network card?

  Hello

  I recently bought Toshiba Satellite L510 laptop and problem in the installation of the wireless driver. I downloaded the driver from Toshiba sites.
  And installation get competed with success but it always ask for divers 'Network controller' and 'Askey for Toshiba.
  I'm trying different drivers of these last two days, but without success.

  Can someone Guild me please how to configure computer L510 laptop wireless. Also where can I get the drivers mentioned above.

  Thanks in advance.

  Hi mate,

  I m asking you to install the WLAN driver on your laptop computer purchased recently. Normally all the stuff is already preinstalled the operating system with all the drivers and tools. He s ready to use.

  However, what you mean exactly with her always ask for divers to Askey Toshiba network controller?

  Your wireless network card is listed in the Manager device correctly or yellow exclamation? What WLAN card you have?

• Satellite L100-120: can not find the driver for wireless network card

  Hello world! help me cause I don't know who I can apply my probem for! I bought this laptop in Russia - and not a bad model, but I want to change the operating system in the way that I love - so I installed vista, but the note does not work well with it, then I installed Windows XP sp2 home ed, changed in the way I wanted to, but the main problem is that I had to install almost all pilots of myself-

  Toshiba modifies his notes in the way that without its own operating system video card, modem card or wifi and sound card do not work! Well, I found all the drivers except for wifi adapter - I almost tried everything but he can't help! wifi card does not work on my note!

  could someone help me in this matter?

  The laptop was supplied with the mini-PCI Intel 3945ABG card WLan. Am I wrong?
  You should look on the Intel page for Wlan drivers for the Vista operating system.
  I also found the drivers for my Intel Wlan card on the Web site.

• Cannot change the duration for still images?

  I have a bunch of stills in my Timeline that are of the same duration. I click with the right button on the first and select speed/time and change it if nothing happens. If I drag the clip on a new layer, I'm able to change the duration. Is there a way to change the individual duration of still images when they are already placed in the Timeline?

  Thank you.

  Right-click on the clip and select the speed/duration.  Don't forget to check the box for ripple edit, move the creeping Clips.    You can select and change multiple clips at "drawing", a box (marquee tool) around the appropriate clips, then right click on for speed/duration.

• Lightroom CC "User permissions error" - cannot change the permissions for the folder Preferences

  I noticed that Lightroom was running slow so I thought it was time to take stock. (I was using Lightroom 5.7). Yesterday, I downloaded the last LR update, which is Lightroom CC [1067055]. I thought that Lightroom CC would replace 5 Lightroom but apparently they have downloaded as separate applications. When I tried to launch Lightroom CC I got an error message indicating "Lightroom has met permission issues. I followed the directions from this link met Lightroom user permissions problems. Bridge of Photoshop Lightroom crashes or hangs at the launch but it does not set itself (I did not take the final step which is - create a new user account). I was working off of Yosemite, so I hope that the error can be corrected if I updated my operating system. Today, I downloaded El Capitan and Lightroom CC will not always open - I get the same error. I went to manually update the read and write permissions for the folders listed, but some of them don't make changes. The preferences file gives me an error saying "the operation cannot be performed because you don't have the necessary authorization." I don't have the "Adobe" folder in this route Caches

  • /Users/ [user name] / Library/Caches/Adobe /.

  How can I solve this problem and get Lightroom CC to work?

  

  @laurawielos,

  Try this:

  the Macintosh HD > users > [your user folder... click on 'Go' on the options bar at the top on the desktop (Menu bar) > then click on the 'option' key > mouse down to the selection of 'Library' that should appear > click on it to open the folder /Users/ [your user name] /Library/ ' "]

  You should now find the appropriate folders to change permissions. Just give your user name of the read/write permissions. I don't think you want to give everyone the read/write permission as some authors have claimed.

• How can I change the settings for virtual network?

  Hi all

  After updateing VMPlayer the other day that my VM access is no longer the internet, I was told that I need to restore my virtual network settings. Does anyone know how to do this? I only have the ability to change my host network, bridge, etc...

  I don't see anywhere the ability to disable automatic bypass in editor of virtual network, suggestions? Thank you

  You already have the answer: Re: WIN XP VM does not connect to Internet but ping google.com, etc... Please help

• Cannot connect iphone, ipod for wireless network

  Original title: my laptop connects to my router asus but my iphone, iPod and other devices don't please help

  my laptop is connected to my wireless router, but no other device can any body help

  Hey Mark,

  You seem to have problems connecting to the Apple products to a wireless router.  Would be nice if you can post your question in the Apple Support Forums.

  https://discussions.Apple.com/index.jspa

  Here is a link I found in the Apple Forums that might help you.

  http://support.Apple.com/kb/ts1398

  Good luck!

• Cannot access the HP laptop Bluetooth functionality after upgrading Windows XP to Windows 7

  Original title: reinstall the Bluetooth Driver

  I have a 32 bit HP under Windows 7 Pro laptop.

  My machine originally came with XP but when I upgraded the hard drive, I switched to Win7 Pro.

  I can't access the Bluetooth of the machine functionality.  It does not appear in Control Panel or Device Manager.

  HP broke off my machine, so their drivers are limited to XP versions.

  Any suggestions on how to reinstall a driver?

  Hey Parker,

  As you have upgraded to Windows 7 from your pre-installed Windows XP laptop, as the HP laptop is configured to meet the requirement of Windows XP operating system and it is better you contact HP support for an answer to the question and guide you in the right direction by following the links below.

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

   

  Post your question in the Forums of HP Support:

  http://h30434.www3.HP.com/PSG/

  I hope that the information above helps you.

• Cannot install the driver for DV6-6c11nr wireless network

  OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

  Hello

  Download and install:

  • Graphics driver AMD from here.
  • Realtek Wlan driver here
  • Here validity fingerrint sensor driver
  • AMD USB 3.0 driver from here

  If you will ask you to restart the system after you install a driver, please do it before you install the other.

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• Impossible to change the wallpaper on Windows 7 after you uninstall Bing Desktop

  Original title: cannot change the wallpaper on Windows 7 after you uninstall Bing Desktop

  I installed desktop Bing a few months back, but I'm tired of his daily wallpaper and decided to uninstall it.

  Now I can't apply themes and wallpapers. When I put manually the images as wallpaper, I get an error message «this image may be defined as wallpaper...»
  I tried almost all the solutions posted anywhere on the internet, without success.
  I can only choose some colors here and it's frustrating. Need help!

  I solved this problem. If anyone has similar problem

  Go to control panel of control-> appearance and personalization-> change background of screen->

  Photo location: change of color United desktopbackground drop-down list and select the background

  -> save changes

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that