Windows XP on T410 - pilot unknown

Similar Questions

• installed windows 7, now missing pilot unknown

  just installed windows 7 on my xps m1530.  everything is going well except the lack of unknown drivers. in the device, under 'other devices' Manager, I have two "base system device" that have no information to let me know what drivers to download. The location of the 1st base system device is bus PCI 3, device 9, function 2.  the location of the 2nd base system device is bus PCI 3, device 9, function 3.

  the 1st base system device, under "Hardware ID" in the Properties tab, the value is

  PCI VEN_1180 & DEV_0843 & SUBSYS_022E1028 & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_022E1028
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  the 2nd two 'base system device' has a hardware Id of this:

  PCI VEN_1180 & DEV_0592 & SUBSYS_022E1028 & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_022E1028
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  If anyone can understand the drivers I need to install to these unknown base system devices please help me.

  Thank you

  

  Download and install THIS driver. The file may list Vista but it will work on 7.  Do not use the Dell Download Manager. Make sure you only select the option to use the web browser to download the file

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• Code 8024200 D Windows Update has encountered an unknown error. I get this message for both updates and windows failed to install.

  Code 8024200 D Windows Update has encountered an unknown error.  I get this message for both updates and windows failed to install. Can someone help me?

  Hello SammyFlo,

  Take a look at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/getting-a-Windows-Update-error-80070490-when/1f53aa2e-238C-488C-a952-cef7c9b7cc87

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Windows 64-bit error: 203: unknown error

  Hello

  I created a SID for a database of pending.

  The standby database is started but not mounted. I can't go up already because the control file is not yet created. And I need to create it using RMAN Duplicate.

  I use RMAN to duplicate the DB.

  C:\Users\Administrateur > rman

  Recovery Manager: release 11.2.0.4.0 - Production on March March 31 10:58:33 2015

  RMAN > Connect target sys

  Password of the database Donnues target:

  ConnectU O the basis of target Donnues: SERVESRI (DBID = 1513335513)

  RMAN > Connect auxiliary sys@standby1

  The auxiliary Donnues database password:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-04006: the auxiliary Donnues basic error: ORA-12518: TNS: Ucoute process failed to transmit the client connection

  The listener log file shows:

  Thu Apr 02 10:25:14 2015

  02 APR. -2015 10:25:14 * (CONNECT_DATA = (SERVICE_NAME = standby1) (CID = (PROGRAM=c:\oracle\product\11.2.0\dbhome_1\bin\ORACLE. (EXE) (Host = serv-SIGORACLE)(User=syst?me))) * (ADDRESS = (PROTOCOL = tcp (PORT = 55354))(HOST=10.0.10.9)) * establish * standby1 * 12518

  TNS-12518: TNS: the process of "listening could not transmit the client connection.

  AMT-12560: TNS: Protocol adapter error

  AMT-00530: Protocol adapter error

  Windows 64-bit error: 203: unknown error

  Here are the files of the network:

  LISTENING PORT. ORA

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = STANDBY1)

  (ORACLE_HOME = E:\app\Administrateur\product\11.2.0\dbhome_2)

  (SID_NAME = SLEEP)

  )

  )

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = Serv-sigorapra)(PORT = 1521))

  )

  ADR_BASE_LISTENER = E:\app\Administrateur\product\11.2.0\dbhome_2\log

  TNSNAMES. ORA

  SERVESRI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = SERV - SIGORACLE.sivoa.local)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = SERVESRI)

  )

  )

  STANDBY1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = SERV - SIGORAPRA.sivoa.local)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = standby1)

  )

  )

  LSNRCTL status INDICATES:

  C:\Users\Administrateur > lsnrctl status

  LSNRCTL for 64-bit Windows: Version 11.2.0.4.0 - Production on 02 - APR. 11-2015:

  05:33

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  O connection (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = Serv-sigorapra)(PORT=1521)

  ))

  STATUS of the LISTENING PROCESS

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.4.0 - Prod

  ction

  Date 02 - APR Duke. -2015 11:02:25

  Durue of Activitu 0 days 0 hours 3 min 9 s

  Trace level off

  Sucuritu ON: OS local authentication

  SNMP OFF

  The process of Ucoute E:\app\Administrateur\product\11 paramÞtres file

  .2.0\dbhome_3\network\admin\listener.ora

  The process of Ucoute E:\app\Administrateur\product\ log file

  11.2.0\dbhome_2\log\diag\tnslsnr\Serv-sigorapra\listener\alert\log. XML

  ' Rucapitulatif d Extrumitu ' Ucoute d points '...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = Serv - sigorapra.sivoa.local)(PORT=152)

  (1)))

  Services of Rucapitulatif...

  The service "STANDBY1" includes 2 occurrences.

  The instance "STANDBY" status UNKNOWN, includes 1 Manager (s) pour this served

  this...

  The "standby1" instance, BLOCKED status, includes 1 Manager (s) pour this serv

  ice...

  The command of a Ruussi

  TNSPING IS OK:

  C:\Users\Administrateur > tnsping standby1

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.4.0 - Production on 02 - APR.

  -2015 11:06:30

  ParamÞtres Utilisus files:

  E:\app\Administrateur\product\11.2.0\dbhome_3\network\admin\sqlnet.ora

  Utilisu TNSNAMES adapter pour the Rusolution of the alias

  Attempt to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TC

  ((P) (HOST = SERV - SIGORAPRA.sivoa.local)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NA

  = ME standby1)))

  OK (0 msec)

  Thank you for your valuable help!

  I found the solution to the problem.

  He has been adding line efollowing ht for the tnsnames.ora:

  (UR = A)

  Source:

  ORA-12528: TNS listener BLOCKED - trying to duplicate database

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• Windows Update has encountered an unknown error. code 80244010

  I get this error message whenever I try to check for update. "" Code 80244010.Windows Update encountered an unknown error.

  The server receives its updates from the WSUS server.

  OS: windows Server2008 R2 standard with sp1.

  There is another server in the same domain with the same operating system and the updates received successfully.

  I tried the steps in this link (http://answers.microsoft.com/en-us/windows/forum/windows_other-update/i-need-10-basic-steps-to-resolve-windows-update/6f4eee7f-459b-42e9-81ef-848b3f95c75d), but it did not work.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot download the updates of Windows. Error code 80070424 "unknown error."

  Help, please! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do?

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer
  http://support.Microsoft.com/kb/916261
  The Automatic Updates feature is disabled in the Security Center. In addition, you cannot turn on the Automatic Updates feature.
  When you try to install updates on the Microsoft Windows Update Web site, you may receive an error message similar to the following:
  0 x 80070424

  Or
  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll (works for Vista)
  Press Ok TaurArian [MVP] 2005-2010-implementation to date of Services

• Updates to 646 - Windows error code "met and unknown error windows.

  I tried to install Windows updates several times and I get the following error message:

  Error code 646-"windows encountered and unknown error."

  I deleted all the elements necessary to make more disk space etc.  I uninstalled a few programs I don't don't need or use.   I did not have the option "accept or deny" license for installation.  Do not know what is happening.

  Help, please!

  Hi MindyShields,
   
   
  Follow the steps listed in the section below to resolve this issue:
   
  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

• Windows Mail error: 0x800CCC69 an unknown error has occurred. Object "phone list".

  How can this be repaired? I get whenever I try to send an e-mail. I can receive but not send.

  An unknown error has occurred. Topic 'Telephone list', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, server response: ' 550 5.3.4 required action not taken. To send your message, please first log in to your online account and solve a puzzle. (Sorry for the inconvenience - these puzzles help stop spammers.)', Port: 25, secure (SSL): Yes, Server error: 550, error number: 0x800CCC69

  I'm looking for resolution please.

  original title: Error Message from Windows Mail

  How can this be repaired? I get whenever I try to send an e-mail. I can receive but not send.

  An unknown error has occurred. Topic 'Telephone list', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, server response: ' 550 5.3.4 required action not taken. To send your message, please first log in to your online account and solve a puzzle. (Sorry for the inconvenience - these puzzles help stop spammers.)', Port: 25, secure (SSL): Yes, Server error: 550, error number: 0x800CCC69

  I'm looking for resolution please.

  I assume you are using Windows Live Mail as you customer, NOT Windows Mail e-mail because Windows Mail does not support hot mail.
  Open your e-mail program > tools > account > your hotmail account > properties > advanced. Under outgoing mail SMTP,.
  Change SMTP port # to 587 NO 25 > click OK.
  In addition, go back to the properties > servers. Make sre you checked on "my server requires authentication" > OK

  t-4-2

• I can't update of Windows security because of an unknown error. Also, I get frequent BSODS.

  Good, so like I said, when I try to get the security updates, I get a message saying "year error occurred while of updates for your computer." Errors found: Code 80072EFE Windows Update encountered an unknown error. "Code 0 x 80244015 appears when I try the update of Defender.

  I've had this laptop (it's a Toshiba Satellite L305, is told by the way) gave me down and it has a number of problems. Another problem taxing enough, it's that I had frequent dumps. Some programs that I want to uninstall used to uninstall because the uninstall file does not exist. I installed a free Revo Uninstaller Pro trial and that helped, but I still don't know what causes the dumps.

  One of my recent problems with laptop computer is my computer crash dumps whenever I try to open Chrome now. It was working fine, then I would get BSOD as I just described, so I tried to uninstall it and then put it back, and it worked well again for the day, and then it happens again. I think it could be a virus. I also learned that it might be a registry error and I can change my registry, but I know almost nothing about computers, so maybe I need to walk through this.

  I have AVG and I used it to scan the computer and I also scanned with the Defender, and both programs have only seen adware. I don't really think that could do much harm. I'm not sure. Right now, it looks like a big mess of problems.

  I think I should also add that the laptop has no trackpad software installed, or at least that's what it looks like. The former owners told me that the trackpad has never worked. I don't know if that has anything to do with it.

  Any advice will help, please leave as much as possible.

  Thank you

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post the details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

  First to test we can the material.

   

  Standard hardware troubleshooting

   

  S.M.A.R.T

  Click Start - All Programs - Accessories - Right click Command Prmodel and choose run as administrator.

   

  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)

   

  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

   

  Run chkdsk

  In computer discs right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow

  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted. We may be able to copy it from another computer.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

   

  Analyze dump files

   

  If you want to analyze your own dump files. (C:\windows\Minidump).

  
  Download and install the debugging tools for Windows
  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363
  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu - symbol file path of the file and enter

   
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

  Close, and then reopen WinDbg. File menu - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. You must update the driver identified.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you have downloaded one of the Live applications or a website based Live
  e-mail, you already have access to your Skydrive account.

  Put your list of events in the Public folder and copy the link in the address bar.

• Windows has encountered an error unknown cofr 80073712

  Cannot complete the update... met windows code unknown error 80073712

  Hello

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  Windows Update error 80073712

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update