Cannot connect iphone, ipod for wireless network

Similar Questions

• Cannot connect Tecra 9000 to wireless network

  Hello

  I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
  The laptop recognizes the hub, but every time I click on connect, I get the same message.

  ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

  I went through a few troubleshooting steps to resolve this problem, but always without success.
  Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

  I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

  Kind regards
  Answer by quoting

  > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
  This may be possible

  The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
  I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
  The wireless network must be always secure

  The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved

• Cannot connect second laptop to wireless network

  . Laptop my son (Vista) (Internet Explorer8) "cannot display the web page. Said diagnosis connect a cable to the NIC 'Connection to the Local network' - its supposed to be wireless and my (1 laptop Windows 7) is online. It was OK, but I changed to a new Talktalk wireless router. The computer Vista laptop says it's connected locally. Help please

  Hello

  ·          You have the updated drivers for the network card?

  ·          Have you been able to connect to the network after replacing the router?

  If not, you can check the settings of the router and if your computer has the correct router configuration.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  You can try the suggestions in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP OfficeJet Pro 8610: Printer cannot connect to the new wireless network

  I got the OfficeJet Pro for a while and everything worked very well (including wireless printing from my Mac and iPad AirPrint). Yesterday, we got a new Modem Router (from Ubee). As I tried to connect the printer with the new network, I fail miserably.

  Here's what I've tried several times: on the small screen of the printer, I select: Network Setup > wireless setting > Wireless Setup wizzard. The printer seems to networks, find the network and asks me the password, I get the password (I did this several times, so no typos!). The printer then "trying to connect to the network"... then it crashes: for a very short moment, I get a blue screen with a white error code (not always the same, for example.) B3FF3802) and then the message "error in the printer, turn off the power, then press.

  I turned off the printer and turn it back on several times (incl. pulling out the power plug and restart after a while), but when I go through the steps above, but I just get the same endresult.

  I deleted the old network as I feared it might interfere with the creation of the new network. No noticeable effect.

  I printed the "results of the wireless network test," which confirms that "your HP printer is unable to connect to your wireless router. In the results of the diagnosis, he states that 'network name (SSID) was found - Fail.

  I quite understand the message that the printer detects the network and shows good SSID / network name. I thought to enter the SSID manually but can't find where I could do.

  I'd be very grateful for any suggestions on what could be the problem (I can't imagine that the printer would not work with a new router... I searched the internet and found stuff on 'Hello compatibility', but do not know which is the issue I'm facing.

  Thanks for your help!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Cannot connect or find a wireless network already in memory

  I'm having some trouble connecting to the wireless network I have in my house. I already had the network wireless saved on the laptop, but now I have difficulties as well to find the network and also to connect manually. You have any ideas what I can do?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  ·                         Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot connect android phones to wireless network

  Hello

  I have 2 phones droid, now they can connect to the old Belkin router and hot spots
  but can not connect to MN - 700
  But my laptop can connect wireless
  I have not activated the MAC filtering
  I tried enabling it and added the MAC address of the phone, but no luck
  Static IP setting is not set on the router or on my phones
  I can't also connect to the server mumble to my friend... I don't know if they are related problems

  Any help will be appreciated
  Thank you

  (Sorry to ask on the forum Windows, there is no option for the router)

  Hello

  You can also link below to browse your connection settings:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  B Eddie

• My computer cannot connect to a WPA2 wireless network.

  I'm on a Dell inspiron 6000 with Windows XP and service pack 3. I recently used a WPA wireless connection, not all of a sudden trying to use this new network, I can't connect.  I type the key network and nothing.

  What I can do and if anyone has any ideas, I'd appreciate it greatly,
  Thank you

  Hello

  I suggest you to download this utility from the link and run the same:

  Troubleshooting Microsoft Windows XP-based wireless networks in small businesses or individuals: http://www.microsoft.com/download/en/details.aspx?id=10634

  You can also follow the steps from the link: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  You can also view: problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Cannot connect iPhone 5S for Macbook Pro or what I can't airdrop and seeing the pictures on my phone or other iDevices.

  Hello

  Ive tried many ways to connect my Iphone 5 to my McBook Pro without success and also cannot use the Airdrop feature all. I am running OS X El Capitan Version 10.11.6

  9 s 7-inch MacBook Pro Late 20011,

  Peocwaaoe, Inatel 2.5 Ghz Core I7

  8 GB at 1333 MHz DDR Memorty #.

  Start drive Macintosh HD

  Intel HD Graphics 3000 512 MB graphics

  Serial number C02H3122DV10

  It's the third issue that I had with my MacBook as it has been recently maintained in Greensboro, North Carolina, and he never acted the same. Thank you.

  Back to the place where you have the service of.

• Cannot connect iPhone 5 for iMac

  Hello

  I spent the last hour, read about common problems that can cause this

  

  I disabled my firewall and forwarded port 7682

  My two devices are on the same network and are connected together in the past.

  Even if the connection never seemed strong.

  If there is any other information I can give you please let me know.

  Thanks in advance for the help.

  -Jordan

  OK, that's good info. This means that, from now on, Apache is not able to serve content outside your machine. This is why even the native browser can't see your site. As soon as we have this problem resolved, you should be able to see the edge site so inspected.

  Here are a few things to try:

  1. Maybe it's because your firewall is not blocking port 8888. Try temporarily disabling your firewall and see if http://192.168.2.4:8888/yogaFest2013/works from the native browser of your device
  2. Open a terminal window and type in the following: netstat - year | grep 'LISTEN' and let me know what he says
  3. Open your httpd.conf file and look for a section like this:

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  Listen 80

  Let me know what your of resembles.

• Cannot change the passphrases for wireless network after upgrade

  Hello

  I just upgraded the firmware for my R7000 and after that (I think) it not possible to change key phrases for the parameters without wire and I cannot see what that the security is WEP WPA etc.

  A few ideas...?

  Best regards Thomas

  Reset the default router and reconfigure from scratch.

• HP LaserJet 1102w Professional P cannot connect to protect the wireless network

  Hello guys,.

  I have a customer who has this printer works very well until 2 months ago but now I'm getting problems to get the WIfi connection

  The script like:

  -Dlink router without password, with active MAC filtering.

  -MAC address of the printer (enter the Wifi list)

  -Manuel IP defined in the configuration of the printer page

  Now the printer only get connection to Wifi if I disable the MAC Dlink filter. If the filter as it is enabled, the printer remains offline (with blue led "blinking").

  Any ideas?

  You can connect without filtering, and then in the address mac filtering to add the mac address of a list generated automatically rather than manually typing it?  can activate filtering?  Is what model dlink router?  Also is there any other devices that are connected to the router by using the filtering?

• Cannot connect iphone or android smartphone residential wireless. PC running windows 7.

  Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.

  Hi MarvinCohen,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.

  Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.

  See the article for more information.

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.

• dv6810us don't Scan for wireless networks

  I have a Pavilion dv6810us notebook running Vista Home Premium. It has the Atheros AR5007 wireless card. There are ten days, he stopped searching for wireless networks. I can only connect to a wireless so I manually enter the SSID and password in manage wireless networks. The connection to a network screen displays the message, "Windows cannot find any additional network." The box at the top right of the screen does not work. The last day, I was able to find wireless networks was at a Starbucks in New York on 29 October. Help, please. Thank you.

  Please do not hold account that last response. I did a Google search and found at www.wefi.com. It works! Thanks a lot for your help. I like the fact that the software gives you a list with icons that tell you if a hot spot is protected or not, so you can see at a glance. Nice work and 1 million thanks!

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• DHCP is not enabled for wireless network

  Hi all

  I have problems with internet connection and a large part of the time, that Network Diagnostics says Windows "DHCP is not enabled for wireless network", then it solves a problem, but I lose the connection several times a day, and each time that do the same fix again.

  I checked the Device Manager settings and DHCP is started and set to automatic, I also ran CMD > ipconfig/all and can paste the results if need be.

  I use a VPN and never had any prior issued connection with it and it seems to be just as hard to connect if the VPN is enabled or disabled.

  Also recently I got the "security defender" virus which has been deleted successfully, the next day of the day it has been deleted, all network cards have messed up, I uninstalled and reinstalled them but that didn't work so I restored my system and that seems to fix the problem, my computer does not seem to run as fast after the virus as before so I wonder if it has an impact on my current problem.

  I use a Toshiba Satellite Pro 660D and Windows 7.

  Hello

   

  Thanks for choosing Microsoft Community. However the question you posted should be better on the TechNet forums. Please post the question here:

   

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

   

  Don't answer if you need assistance, we will be happy to help you.