Cannot change the settings of firewall hardware... now what?

Similar Questions

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• My Adobe Acrobat failed upadte w error 1321 the installer has insufficinet privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance. Now, try to reinstall my Adobe Acrobat, but I don't see the download o

  My Adobe Acrobat update failed w error 1321 the installer has sufficient privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance.

  Now, try to reinstall my Adobe Acrobat but I don't see the download option when I connect to my Adobe account.  Help, please.

  I would also like to confirm that I have uninstall my Adobe Acrobat before reinstalling.

  OK I finally found the download option

• I changed the settings of Java and now Firefox plant she opens up, even in safe mode; How can I fix?

  I tried to change the settings to access the comments section of Slate.com. Good or bad, I changed a setting Java-1 to 2. The setting spoke in: config and I think it was some sort of max. As I can't open anything, I'm not sure.

  When I made the change, firefox crashed immediately, whenever I tried to reopen, even in safe mode, it hangs again immediately and will not reopen.

  Hi pternagy,
  Sorry, you have problems.

  For any future reference. Those of us who mess directly with: config soon find out how to get errors and it is wise to backup. Occasionally backup of your entire profile for example can be useful and would probably give you a quick solution of the copy on the file from the backup.

  • Backup and restore Firefox profiles information

  OK on the topic to try to get Firefox back as it was:
  Find your profile and the prefs.js file and rename that. (The renamed file is a potentially useful backup.) Firefox is then forced to regenerate the file and will reset your default preferences. You can then re open and use Firefox. Then, try to return to normal.

  Try to manually change the file prefs.js is normally a bad idea. However, if this is a one-time change prefs it would be possible to directly edit the prefs.js file (while Firefox is closed) to get everything back to how it was before. You have the file renamed to work with. Probably best to test this in a new additional profile so only break you test additional essential Firefox profiles profiles works do not.

  These articles should help you:

  • http://KB.mozillazine.org/prefs.js_file
  • _Solution-2-delete-Firefox-preference-files Reset Firefox preferences to troubleshoot and solve problems
  • Profiles - where Firefox stores your bookmarks, passwords and other user data#w_finding-your-profile-without-opening-firefox
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  Please post back with how you go and if you need additional assistance.
  Good luck.

• Cannot change the settings on the computer. No access to the administrator account

  Original title: I can't access permissions to change settings or programs.

  I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software

  Hi Christophe,

  -With which user account you have connected? It is a standard user account?

  -What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.

  Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.

  1. you must start the computer by using the Windows 7 installation media.

  Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.

  Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.

  2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.

  In the command prompt, type net user administrator / Active: Yes

  After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.

  Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.

  Once you have set the administrator type account with your user account, disable the default user account by following these steps.

  1. login to your user account.

  2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.

  3. type net user administrator / active: No.

  This will disable the built-in Administrator account.

  Hope this information is useful.

• Cannot change the settings after the take snapshot in VM

  Hello forum, I need to increase a disc size and the number of virtual processors on couple of virtual machines, the last week I have instant tool of these virtual machines. Today, when I try to change the settings, I see that the options are grayed out. Why is it so? This is a limitation of vmware. Do I have to delete the snapshots before making changes? Which will remove the ability to roll back changes if necessary. I'm under Windows 2008 R2 virtual machines.

  Virtual disks can only increase if they have no active snapshots. The snapshot files contains modified data blocks that correspond to their parent records, and this mapping I lost if you have increased a virtual disk with snapshots.

  André

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• The remote desktop icon - cannot change the settings & only appeared yesterday - have I been compromised

  Hello

  I had a quick glance around my system because I think it has been compromised. Today, I noticed something I never saw before a "Remote Desktop connection" icon in my documents - time created yesterday - at about 20:00 - 08/04 when I was not on the machine and certainly don't remember updated anything.
  I went into control panel / system/distance and unchecked boxes related to assistance remotely etc. Is there anyway that anyone can access my machine remotely? or how would I know if they have?  The sudden appearance of this icon and the calendar has caused me some alarm. I deleted it + at the present time, it is in the trash. I did it because it gives an error when I try to save changes to settings that do not allow access.
  Someone could give me some advice please on what this could be and how I can assure any remote access to my pc. (Windows XP / wired ethernet via Bt Home Hub connection)  Thank you.
  Hello
  If you think that your computer is infected with malware, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• Cannot change the settings of my wallpaper! (it is extensible, Center, adapt)

  Hello

  It is a minor problem compared to many, I'm sure, but I'm used to be able to have this kind of control over my desk and it drives me crazy! Can I change my wallpaper to any image that I love, but no matter what the proportions of the picture that I chose, it appears as "stretch" to adapt to the size of the screen. When I try to change the image of all other options, such as Center, tile, or fit, nothing changes. (Yes, I'm clicking on the 'Save Changes' button.) I restarted the computer, doing research on the internet, but nobody else seems to have this problem.

  This problem exists on my brand new laptop since day one, so I don't think it's a problem with conflict with the pilots of other programs. But it sounds (to myself for the most part uneducated) like a driver problem. If it OF a driver problem, can someone tell me specifically that drivers must be re-installed or updated? Thank you!

  Hello

  You are using an HP laptop?

  If so, please see the solution (with the permission of SharonMary):

  Method step by step:

  1. go to http://www.hp.com/#Support

  2 Select software button step 1 and download drivers

  3. under Step 2, enter your product name (e.g. pavilion 2022... be very careful because I do not know the precise model is important.)

  4. click on the link corresponding to your model of PC

  5. choose the Windows 7 operating system (assume that you will be 32-bit)

  6 scroll the list Select software and drivers and choose Activator position photo Wallpaper

  > If you do not find the name of your product in 3. over here, you can run the sp45575.exe fix:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45575.exe

  It seems to work for others who have not been able to locate the "facilitator of photo wallpaper" by following the instructions above.

  > If running that you're afraid of a blind exe file, you can read about the sp45575.exe here:

  Re: Background images - operating systems and software - HP Support Forum's

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the settings of the SMTP server

  Since I upgraded to El Capitan, I got e-mail problems. Whenever I try to change a typing mistake in my settings of SMTP server for a POP in my Apple Mail account, the changes seem to keep - I can then send emails fine - BUT when I exit mail and return in the incorrect SMTP server settings are back.  Who can I modify it to take?  Please help - this is driving me crazy.

  Usual brute force method: delete the entry of e-mail account entirely and add new.

• You cannot change the settings of the source of #R3d

  Hey guys,.

  I did a project on the 5K EPIC and modified by means of frame rates, now I'm trying the RAW settings and 'the source settings' can be clicked.

  I'm doing something wrong?

  These settings are now loaded the clip in the Source monitor Panel, switch to tab effect and then Options to pass on the master sub-tab.

• cannot change the settings of the options

  When I go into the options of that selection is stuck under the general tab, I'm not able to select the other tabs.

  Apparently "Blue Fox" theme is not let me enter options - thanks for the help.

• Still can not log in to windows XP, cannot change the user name, or start in what either.

  locked out of windows xp.  happens only with the window prompted for a user name and password.  the user name is the name of the previous owner and does not know the password.  It is as far as the computer goes.  It's not my computer (thank God), but I need to know what to do to help the girl he has.  The computer was rebuilt and bought by it.  It's a computer dell laptop.

  What I can do.  I can't connect what either.  I can't edit or create a new user name and password for it either.  I can't get in any other mode.  You have any suggestions?

  Hello

  Microsoft cannot help you to reset, change or delete passwords. For more information, see the article mentioned below.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/default.aspx/KB/189126