Cannot complete the DCPROMO. Password does not meet complexity?
Forgive me I am confused by this myself. I set up a lot of Server 2008 ad in test environments and never had this error. Starts very well, install the role of the ADDS and then run DCPROMO. It was during this time, I get the error: "the local administrator account becomes the domain administrator account when you create a new domain. Cannot create the new domain because the local administrator account password does not meet the conditions. Currently, a password is not required for the local administrator account. We recommend that you use the net user command - online tool with the /passwordreg:yes option to require a password for this account before you create the new domain; Otherwise a password will not be required for the domain administrator account. "What in the heck? I KNOW that my password meets the requirements, but even if I change it to something of very complex, that seems not care and throw the same error during DCPROMO. I even disabled the complexity requirements in the local security policy, but seems to have no effect. I'm at my wits end, any suggestions?
Tags: Dell Servers
Similar Questions
-
Original title: password problem
When I try to write a new password on my windows ultimate 7, I received this message.
"the u of typed password does not meet password policy requirements, check the minimum password length, password complexity and password history requirements"
What can I do? I can't change my password :(
Hi MedoXW,
This means that you must create a password that meets all of the requirements
1. make sure that the password is at least 6 to 8 characters.
2. make sure that the password includes at least 1 capital letter, 1 number and a symbol as "!" or "$".
3. make sure that the password is not one that you have used in the past.
Follow all these rules and it should work.
I hope this helps.
-
"View or print the homegroup password '+' does not.
"View or print the homegroup password '+' does not.
Hi Orlando,
Thanks for posting your question in the Microsoft Community.
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:
1. what operating system is installed on your computer?
2. what exactly is the problem you are having?
3. What is the error message that is accurate or complete?
Please provide more information on the specific issue to fix it as soon as possible.
What version of the operating system Windows am I running? :
For reference:
Where can I find my homegroup password? :
http://Windows.Microsoft.com/en-us/Windows7/where-can-I-find-my-HomeGroup-password
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Somehow my diary of the administrator password does not work, no disc reset
original title: locked out! Help, please
Somehow my diary of the administrator password does not work. I tried everyting. I use Windows Vista.
I continue to be asked to provide a 'A' floppy to recover my password, but there is no floppy drive on my computer. I have not configured a retreival diskette.
I am not able to access all the programs that I installed as an administrator through the comments log in.
I tried to re - install the complete operating system after no longer being able to access my programs and I am not allowed to do it either.
I'm at my wit's end! Can someone please?
Thank you
Completely lost in cyber space.
Hello AdrianaMonti,
I'm sorry but the Microsoft forum rules do not help users circumvent passwords of Windows OS or software systems.
I do not understand why you have problems with re-setup because it has nothing to do with your original administrator password. Your copy of Windows came pre-installed on your PC or did you buy a boxed copy and install it yourself?
If you are unable to re - install probably you get error messages. What these error messages?
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box
Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?
Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?
I found this in another thread that you created [*]:
I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?
I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?
-
Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements
Hello
I suggest you to send your request in this forum for better support. -
I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?
Hello
Please follow the steps from the link below.
Appropriating a file or a folder
http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
Also check out the links below.
Encrypt or decrypt a file or folder
http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file
Recover encrypted files or folders
http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders
Import or export certificates and private keys
http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys
-
HP Officejet Pro L7590 - cannot scan - the installation program does not scan Betacam
I have a HP Officejet Pro L7590 all-in-one connected to my iMac OS X Lion 10.7.4 running, and I can't Scan functionality.
When I set up the device, it does not recognize that there analysis ability, if I try to scan from the Preferences/Print & Scan window there is no option to do so.
Also, the HP utility displays no information on digitization.
When I try to run Scan Manager device HP HP Scan Pro application opens then immediately crashes.
I tried to reinstall the HP software, but it makes no difference.
Scanning has worked in the past with the same printer, but not since I installed Lion.
Suggestions welcome! Thank you very much
Hello
The application of HP Scan Pro for Mac OS X 10.4 and 10.5, so it seems you are using older software which are not provided for Lion.
Please remove completely any HP software installed using the scrubber tool:
* Please note that the following steps will delete all HP software installed.
1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
2. Select Applications
3 select the Hewlett-Packard folder
4. double-click on uninstall HP application
5 follow the uninstall to prompt to select a device to uninstall
6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
7 approve any prompt to uninstall all HP software.To avoid any problems due to the use of the software, be sure to repair disk permissions before you reconfigure the printer:
1. open the Applications folder.
2. go to the Utilities folder.
3. double-click on disk utility.
4 Select the hard disk that contains the boot volume.
5. go to the first aid tab and select Repair disk permissions.
Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.Go into System Preferences > print & Scan
Click on the sign more and select your printer.
The latest version of the software for your operating system will be downloaded automatically.
If the software download fails for any reason, download and install the latest drivers 2.9 HP printer:
http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg
Now add the printer by following the steps above.
Below you can find what scan methods can be used with Lion OS x:
http://support.HP.com/us-en/document/c01910186
Kind regards
Shlomi
-
Why my master password does not meet the correct password, in that I get
After you set up a master password in security settings constantly, he asked for it, but when I get in there it does not recognize the password. I wrote it down in order to avoid this problem. I don't know that it is the only one I chose. try again again and again did not help.
Please help me. What do you think is the best way to solve this problem?Hello
Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.
Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.
Refresh for Firefox:
- Open the troubleshooting information page using one of the following methods:
- Click the menu button
click Help
and select troubleshooting information. Should open a new tab containing your troubleshooting information.
- If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
- Click the menu button
- At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
- Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
- Click Finish and reopen Firefox.
This corrects the problem? Please report to us!
Thank you.
- Open the troubleshooting information page using one of the following methods:
-
applications has not enterlislze properely.click on ok to finish the applications.i done this but still don't work
Hi Tracey341975,
Your computer will load at all? If operations so the following, listed in the link below. If it does not start, please in safe mode by pressing F8 black of the screen before the windows logo and select Safe mode and perform the following, listed steps in the link below.
http://support.Microsoft.com/kb/310353
Let us know if your computer has no errors in case of boot. If it is not it means that you have an application that is causing this error, we can identify and solve.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
HP Deskjet D1660: Cannot install printer or Scanner, does not meet the min requirements
I recently spent computers, from Windows 7 to Windows 7 Professional, and I seem to have install my HP Deskjet D1660 and my scanner, a HP Scanjet G4010 of questions. Both gave me the same problems.
When I connected my Deskjet, my PC tried to install the drivers from the usb port. He reconizes as a device, it could not install the drivers. Then, I downloaded the program core facility for the Deskjet (DJ_SF_06_D1600_NonNet_Basic_Win_WW_140_175.exe) and follow the guests.
The installer is never far away and from the beginning, I get a message screen for the system demand for results, indicating that my computer is missing, the USB drivers and a USB device. I had exactly the same result when I tried to install my Scanjet.
The screen looks like this:
And like this:
I checked my registry and my USB is enabled, so I'm not entirely sure about the problem. Also, I went through the troubleshooting to the Deskjet printer page. I tried disconnecting / reconnecting the cable USB from the printer and the computer. I made sure automatic updates is turned on. I made sure that all updates are installed. I tried to run the installer with virus protection disabled. I tried to run the installer with the firewall disabled too. I even went through the devices Manager Wizard to add the printer this way goods instructions on the troubleshooting page, but no dice.
I'm really just scratching my head on this one.
In regards to recent software or driver changes, I mean the computer is new. I've been slowly installing programs, that I used on my old computer, but they never have interefered with the printer or a scanner working previously.
I use a wireless internet connection.
Hello
Click the Start button and type folder in the search bar, then open the Temp folder indicated.
Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
Open the installation folder.
Find the file usbready.exe and rename it to usbready.old.exe
Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
Now follow the installation and check for the difference.
Kind regards
Shlomi -
Hello
I have tried to create a new group of companies in vRealize Automation 6.2.3 and received the following error:
The requested operation cannot be completed: resource not found.
I've attached a screenshot of the error. All services on the device of vRA show such registered.
I think that this is related to the duty reinstall my SQL IaaS database a few weeks back, but I'm not sure.
Any help would be greatly appreciated,
-Mark
I finally got to the bottom of this. It was because of the vRA IaaS server being unable to speak to the DTC resource on my SQL cluster due to these two components are in different domains.
If you are interested, I have documented the solution here:
-Mark
-
Why the weather application does not meet the 3D touch after update in 9.3?
I just downloaded the new update in 9.3 and I was under the impression that the weather app would be able to meet 3D touch, being that mine is not working the case.
KIM I had the same problem. Apple said that I should do a restore. Blah blah blah.
Bottom line, tactile 3d Weather app did not work. I deleted my save locations in App is weather. 3D touch works. I have readded my places. Still works.
I hope thay works for you.
-
Any ideas? I have set up a new account as happened for a while, but I want to just get on the old account for a moment in order to change the address associated with my Xbox Live and anxious a few emails.
Any help is appeciated.
Hello
Are you referring to Hotmail?
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions -
Cannot start the workstation service, does not work error 1068 (Vista SP2)
HelloIt's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.It fails on: "Error 1068" "the dependency service or group could start.CBS.log sfc/scannow shows messages like:-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".-Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".A problem with the system audit reports:-on scname exitcode: 1068: LanmanWorkstationI have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.FYI: my mrxsmbxxx.sys files are all 23-02-2010.Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.Your suggestions are welcome.Thank you for your help.EricI finally found a solution to this problem.
I installed http://support.microsoft.com/kb/2272153/ .
I hope it's useful to others.
Eric
Maybe you are looking for
-
External hard drive gives USB not recognized error
I have a Western Digital Passport 80 GB HD, which worked fine with XP until today. I plugged this morning and received an error not recognized USB. I followed the troubleshooting tips and online help. It seems that in most cases, if you go to comp
-
Driver/software for laptop HP Compaq 6730 s
Hello Laptop HP Compaq 6730 s Windows 7 Ultimate 32 bit I need link for two unknown devices: 1 ACPI\HPQ0004 * HPQ0004 2 ACPI\HPQ0006 * HPQ0006 Thank you
-
Untrapped exception on blackberry 9300 blackBerry Smartphones
I get a message error uncaught exception: Application Registry.waitFor (0x1c26ebcd7b130582) timeout. I can not connect mt phone to my manager office or indeed make use of my phone. any help Kamelaht
-
Bug "BASELINE by default MOVING_WINDOW is not there"
Hello, everyone,I recently got a half dozen new databases to administer and after inspection, I see the AWR reports are not collected. Looking closely, there is no baseline don't "Moving_window" by default it.The basics are all 11.2.0.3 Enterprise ed
-
"Use Enhanced Keyboard on Windows Client if available" GPO disappeared in view 6?
According to the title.I can't find the 'use Enhanced Keyboard on Windows Client so they are available' setting that used to be in the view 5 Client GPO.Group Policy does not include this more - can anyone confirm?We want to go through sequence thin