Cannot completely disconnect usb PC connection

Similar Questions

• cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

  Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

  Hello

   
  • What operating system is installed on the computer?
  • Have you tried with another name?
  Go to network and sharing settings and check the name of the previously defined network.
   
  Try the following steps to do the same thing:
  a. right click on the Network icon located on the bar spots.
  b. click on open network and sharing Center.
  c. under view your information network base and installation connections check information (network name).
  d. try another name in order to set up a network.
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
   
  http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
   
  I hope this helps!
   

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• vCenter + 3 guest - root - cannot complete the connection due to an incorrect username or password

  Hi guys,.

  It is the latest attempt to address this issue the nice way.

  We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)

  I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.

  Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)

  I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.

  Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...

  It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...

  Any feedback is greatly appreciated!

  Apparently, was my old brain!

  Just enter the password once again with a slight difference and it worked. @

• Cannot complete the connection due to a bad user name or password

  Hello. I have a strange problem. I am beginner with VMware products. I installed ESXi on HP proliant 180 gen9 6.0.

  After that, I used converter stand alone to migrate the linux server. Still was very good, everything works. But the next problem emerges after that two or three time - when I try to connect to remote ESXi it telling me "cannot close connection due to a bad username or password." No matter how I connect via Vsphere Client, SSH, or simply click on the link "Browse data in the host inventory warehouses" in the browser. In addition. I can connect with the same login\password using usb keyboard connected to the server.   Password change has no effect. It allows only a reset to default. And then it starts to pitch up and anywhere.  I read somewhere that the problem occurs if the set dns and host name on ESXi, I put not DNS so that only the host name. Another problem not defined RAID controller, but I don't think it is interconnected, maybe I'm wrong? I'd appreciate any ideas and help.

  
  

  Hello. Ty for answer. Problem solved. I started to use same keyboard as ESXi server option. After the default US in US int problem has resolved. I don't know why it works with default US for a few days before.

• Cannot complete the connection due to an incorrect username or password

  Hello

  I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:

  Cannot complete the connection due to an incorrect username or password

  Username and password are correct

  Can someone help me?

  THX

  Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?

  You are able to connect on the DCUI (console)?

  André

• Connect/disconnect USB

  Is there an API to connect/disconnect a USB device to the host/guest?

  I don't see no function definition for such a case of use in the API... it is "mission critical", so I thought I'd ask.

  No vmware employee confirms that they don't or don't not exist?

  There is no API avaiable for the connect/disconnect USB VIX SDK operation.

  -Thank you

  Sevin.

• HP4240 printer scanner will not scan (says USB not connected) also cannot print attachments in emails

  1. an email has been sent with an attachment in PDF format, but I couldn't print it.

  2. I tried to scan a document and then join an email but the scan says USB not connected. The printer will print however

  Hello

  1. what operating system is installed on the computer?

  2. are you able to print or scan from other applications/program?

  Method 1: I suggest you try the procedure described in the below mentioned link and check if it helps.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: If the problem is not resolved, you can download the latest driver from the website link mentioned below manufacturer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=457003&lang=en&cc=us&prodTypeId=18972&prodSeriesId=456989&TaskID=135

  Hope this information is useful.

• Cannot complete installation of Windows 7 OEM on Precision T3400

  Can someone help me?

  I try to do a clean install on a Dell Precision T3400 with Windows 7 64 Bit OEM, but cannot complete the sequence.

  It goes through the sequence of the whole installation, restart a couple of times. He gets in the beginning of the sequence as "complete installation" - contribute to what, according to me, it's the final reboot - and then crashes. I think that what should come next is the bit where to enter information first name of computer use - time, date, place - time etc. I never get that much, however.

  I have not updated the BIOS. Previously Windows Vista - but the disk has been deleted - not sure if I can update the BIOS in this State.

  Another thing - I swapped the graphics card. The monitor of works well during the initial installation sequence.

  Any suggestions?

  Thanks a lot for reading.

  The suggestion above about SATA drives didn't really solve my problem, but it got me thinking in the right direction.

  Here's what I've learned about this through the answer and the answers on other forums above. It turns out be a common problem:

  It is usually caused by the lack of drivers for devices that are connected to the computer. Devices can include: any type of USB device (may be same mouse or keyboard), any type of hard disk, graphics cards and other types of cards such as PCI or PCIe Firewire. If you have a SCSI card then remove it permanently.

  I had a Dell keyboard with built in USB ports and a Media Player control. I swapped it for a simple vanilla ordinary keyboard.

  I also already swapped the graphics card that came installed on the T3400 for an older NVidia Quadro card as a fix for compatibility with my older monitors SVGA adapter.  When I searched on the NVIDIA site, I discovered that there is no Windows 7 driver for my graphics card, so I bought a DVI - I adapter that I needed the original card and replace.

  My problem turned out to be the graphics card.

  On other forums I have seen people solve the problem by removing the USB devices all THE. If you have a keyboard and a USB mouse, this may seem to be a problem. However, once you have initialized the windows 7 install process you can remove the keyboard and the mouse. Whenever the computer reboots it page and warn that any input device is fixed, but after a short pause, he must continue with the installation procedure. In my case, the fancy USB keyboard was certainly a problem too. Disconnected after initialization of the installation allowed the installation of two additional steps.

  I curse me Microsoft about this problem, but to be honest, I was not able to run a compatibility test of windows 7 on my computer. I bought it on ebay without an operating system. If I could perhaps it would have marked the graphics card problem and composite USB keyboard device.

  Don't know if it will work, but if you can't figure out what your driver problem, you can be able to run a hardware compatibility test and periperhals by a temporary installation of Ubuntu and connect it to the Net. I had no problem to boot Ubuntu from a USB key and the connection to the network.  It works perfectly first time without any of the usual shenanigans of Microsoft. In my opinion, Ubuntu is an operating system much higher with a much nicer user experience. My only reason to stick with Microsoft's older software. It's highly unlikely that I will ever consider buying a new system from Microsoft again. They lose the pedals after XP.

  Good luck

• How can I disable a VM pref retroactively or by substitution of policy? (for example on stop USB auto connect)

  I'm using VMWare Workstation 7. We have a problem that I met in a large number of virtual machines is that they didn't 'Automatically connect new USB devices' disabled when their snapshots have been created. Although I can disable this preference in future from the virtual computer, disabling the preference power and take another cliché, it's a great nuisance. Is it possible that I can replace all the VMS I load and resume on my system basically by default that the preference off, regardless of the way in which an individual VM may be set, essentially the substitution of the individual preference?

  It has become very annoying. I had all these clichés with auto USB active connect. I could disable the vmware USB cross on the host completely, but I still need USB. I just don't want to connect devices automatically.

  If there is a way to replace the policy, I would also like to add something like bios.bootDelay = "5000" as a preference of substitution so that all virtual machines running snapshot would use this preference.

  Thanks for any help or idea that you can offer

  WoodyZ thanks for your help. I was able to stop the new devices to be autoconnectée. I looked in the vmware.log for some of my virtual machines. Workstation search three configuration files:

  DICT - USER default C:\Users\\AppData\Roaming\VMware\config.ini

  DICT - C:\ProgramData\VMware\VMware Workstation\config.ini default HOST

  DICT - GLOBAL SETTINGS C:\ProgramData\VMware\VMware Workstation\settings.ini

  First, I tried the HOST file. I've added:

  USB. Generic.AutoConnect = "FALSE".

  It worked, but only if the vmx file does not explicitly mention the opposite (in other words, there is no substitution). AutoConnect is by default TRUE, many vmx files won't that explicitly in the file vmx is always a good solution to stop the automatic connection of new devices. But for example I put in a file vmx usb.generic.autoconnect = "TRUE" , and even with autoconnect defined in the file HOST " false", autoconnect is always enabled when I came to the virtual machine.

  Then, I moved this line between the HOST and the GLOBAL configuration file:

  USB. Generic.AutoConnect = "FALSE".

  That seems to work as a substitution. I tried several times to confirm, the VMWare Workstation 9 closing and reopening. Whenever I took a virtual machine, although it was usb.generic.autoconnect = "TRUE" in the vmx file, the automatic connection of new devices has been disabled. Is why it seems the correct way to override and disable usb.generic.autoconnect no matter how it is defined in a vmx file is to place the preference in the GLOBAL file. Note that changing that option prevents only against the new devices being autoconnectée; in other words, it prevents the devices that do not already have a login entry automatic explicit device in the file like usb.autoConnect.device0 vmx, usb.autoConnect.device1, etc.. Also note that when a virtual machine is interrupted the USB controller "connects automatically new USB devices" in the GUI can still see the verified, but when the virtual machine is resumed, it will be disabled.

  Stop autoconnect entirely: I have experience implementing usb.autoConnect.device0 = "" global config and who can stop a device with a usb.autoConnect.device0 entry in the vmx file to be autoconnectée on the resume. " And once the virtual machine is resumed the device can still be connected manually. (Although there will be a warning on connect "the value of usb.autoConnect.device0 cannot be redefined" so maybe it's not ideal). If someone wanted to expand this idea they could add a line for each up to usb.autoConnect.deviceN with N being all that is the max. Anyone know what it is?

  If someone who reads it isn't aware of any piece of data that really makes a recommended to contain malicious software on a virtual computer then this information must be added. I don't know that if many people is aware that if your virtual machine is the active window and you plugin a key USB and VMWare tools is installed on the client, then the default player is autoconnectée at the prompt.

  I am also playing with adding other prefs from different files; like right now I've got bios.bootDelay = "5000" in my HOST file and that works for delaying my VMs to start in 5 seconds to make it a little easier access the BIOS.

• Satellite R630 - after that standby cannot reuse a Wi - Fi connection

  I have a new Toshiba Satellite R630, and whenever he goes on the waking state, it disconnects my internet connection Wi - Fi.
  So, I have to restart completely the laptop to be able to get the internet connection! It is very annoying.

  Does anyone have a solution?
  Thank you very much!

  What happens if you have to disable and enable the NIC wireless (FN + F8) again?
  You can use WiFi again?

• Problem with disconnecting USB 3.0 HDTB110EK3BA

  Hello

  have a problem that my Toshiba HDTB110EK3BA 1 TB disconnect USB 3.0. The drive to disconnect after 5-10 Minutes.
  USB 2.0 I have no problem.

  Any proposed solution.

  Running W7 64-bit system

  Best regards
  Duce4711

  Your Toshiba external HARD drive HDTB110EK3BA supports the USB 3.0 standard and should work just fine in USB 3.0 port.

  But as you say; the HARD drive works fine in USB 2.0.
  That's why I think that there is a problem with the HARD drive but with the USB 3.0 port.

  Maybe the USB 3.0 driver should be updated?
  In some cases, windows would have turned off the USB devices connected in order to safe.

  This setting can be disabled by:
  Device Manager-> USB game controllers, sounds-> USB hub / properties-> tab power management controller

  Option: leave the device connected to a safe food supply system should always be disabled.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Cannot open any usb device - help!

  cannot open any usb device - including external hard drive for back in place - in one of the ports on my computer - they all work on other computers - worked well on Friday - doesn't work don't not Monday - get up unknown device message and shows even in Device Manager - have you tried to uninstall etc - does not work - nothing I found solves the problem - can my computer blew something that only affects reading USB keys?

  Hello

  1. what exactly happens when you try to connect the USB device?

  2. you receive an error message when you connect the USB device?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• June 2010 update messed up printer USB - internet connection

  Installed the recent Vista Update June 18

  Now cannot use the printer on USB and connect to internet - wireless adapter on another port at the same time.

  Use the Internet or print, but may not have connected printer and function of the wireless adapter.

  Check that this latest driver is enabled for both devices?

  Microsoft has a solution?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve it:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner