Cannot configure the sync partnership

Similar Questions

• Cannot delete the sync partnership

  This is the second time that this has happened after I re-installed Windows 7 to solve it the first time. When I have copied a standard file from W7 as my Pictures\Slideshows or moved to the location of Username\Downloads on a network share, it created a sync partnership, and I now have a sync icon in the system tray.

  How can I remove the sync partnership and thus get rid of the icon?

  The previous post in "Cannot complete the partnership Sych" does not work, and as you can see in their someone mentioned that he did not work for them either.

  I can't delete the sync partnership, and I already disabled "Make available offline" on the record, but the link still Synchronization Manager. I searched on the internet and tried all sorts of suggestions such as adding FormatDatabase registry key and taking possession of the CSC folder and delete the files hidden in offline mode. None of it worked, and it seems that a lot of people have the same problem.

  How can we just cancel a sync partnership?

  Any ideas?

  Hello Marilyn,.

  Thanks for the reply. Unfortunately, I had tried that before and even if it meant that the partnership is now empty (when you try to drill into it), the partnership itself is still listed which keeps the icon synchronize in the system tray. Now just disabled files offline on a clean place, I have install so it I hope that never to create them in the first place. I don't think it is a bug or poorly implemented the feature and should be wound for a fix in a future update or a service pack.

  Concerning

  VIC

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• When I remove my computer and try to connect to a different wireless network Iget "windows cannot configure the wireless connection" what can I do?

  My "wireless connection" screen does not show available networks, but gives me the message "Windows cannot configure this wireless connection".

  Should what changes I make to connect to different wireless routers?

  Hello

  You should try another network you know for sure that it is Public and open (as in the Starbucks or McDonald's).

  Wireless in general, http://www.ezlan.net/wireless.html

• Windows cannot configure the Merge Module SOHlib

  error message at startup.

  original title: SOHLib Module.msi merge

  How to stop a message that happens every time I start the computer?

  The a of windows cannot continue.  SOHLib fusion Module.msi is not found.

  Then, another window appears that says: Error 1706 no valid entry was found for the product.

  Hi Alfonsos,

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems that you receive an error message "windows install cannot continue. SOHLib fusion Module.msi was not found"on startup.

  (1) did you do changes on the computer before this problem?

  Step 1: I would say as you follow the steps to start the computer in Mode safe and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the issue is not persistent, then follow the article to find the cause of the same thing.

  Step 2: I suggest you to place the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 3 of the link to clean boot the computer to a normal startup mode.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• BlackBerry Smartphones Sync does not work. Cannot select the sync check boxes

  Hello

  I installed the latest Desktop Software 6.0. We use outlook as our e-mail program. When I try to sync with my outlook account, I first have to configure settings for example to sync my calendar. I choose "two way sync" and select the correct profile. After that I click on finish, the check box for the calendar is not verified. If I click on OK, then he said: 'no application is implemented or enabled for synchronization. Are you sure you want to leave? »

  Its the same thing with other items such as calendar and tasks.

  I did a clean uninstall of the software, including the removal of the reg key and appdata folders. I deleted my outlook profile and created a new.

  All this without success.

  I have no more ideas, I hope you do.

  Kind regards

  Joachim

  Hello

  When I click the sync Setup popup box appears again. No arrow is displayed. It does not matter which kind I chose to synchronize. No error message appears.

  I managed to solve this problem by making an own uninstaller software (including the reg key etc.) as described in the KB.

  After that, I installed an earlier version of the desktop software (6.0.0). It works for me.

  Kind regards

  PFAFF

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• Cannot configure the Laptop Inspiron 15 5559 to boot from the DVD drive

  I have a new laptop Inspiron 15 5559 .  There seems to be no way to configure the BIOS to boot from a repair disc to win 10.  After an accident on my old laptop, I know how it is important to be able to restore a disk image of my external backup.

  Help please because I do not see how to get the player optical, listed in the boot order.  It doesn't seem to be any mention of it.

  the bios is probably corrupted also not hostile user. try Googling a tutorial of bios dell for the setting of parameters for 5559. Lucky, you're not going to find one. It's not even a decent manual. the user must download the recovery files that must be installed on the hard drive before l/p of the plant leaves. the Bios is archaic and most of the time does not meet the evolution of the legacy in the uefi. you could try to update the bios, but I doubt that you will succeed even after doin so. call the tech and have them try. I did and they screwed up my 5559 and they had me reinstall the recovery of a usb drive, they sent. It helps took 5 hours to install. then another 3 hours of updates. and the 5559 still does not work properly. Maybe I got a lemon. However the subject requested, and every time I called dell every question I asked I was put on hold. what say you. He offered dell technicians, although very courteous do not know and don't have to put you on hold the Conference with other technicians or find which could help. Sorry to be critical but after over the hours on the phone most of the time on hold dell tech dept is not up to snuff.

• Cannot configure the store under OpenSUSE 12.1

  Hello. I can't go beyond to configure the store under OpenSUSE 12.1; the same error with java or java 1.6.0_24 1.7.0_5, adminboot_0.log or snaboot_0.log do not display error messages, Oracle NoSQL is listening on port 5000 and 5001, port 1099 does not appear under netstat, / etc/hosts has 127.0.0.1 localhost, the firewall is enabled or not, it's a Virgin OpenSUSE installation under VirtualBox, logged as root in the shell , or logged in as root on the desktop. The same Installation of NoSQL Oracle scripts work under Solaris, Debian, CentOS, Fedora. The following address (80.156.86.78) is that a default address of the Deutsche Telekom redirects routers for unknown IP addresses. Any ideas where I should look? Maybe some programs installed by default in OpenSUSE interferes with Oracle NoSQL? Thank you, Jesus.
  
  java-jar ${KVHOME}/lib/kvstore-${VERSION}.jar runadmin-port 5000 - host localhost
  
  Exception in thread "main" java.rmi.ConnectException: connection refused to host: 80.156.86.78; nested exception is:
  java.net.ConnectException: connection timed out
  at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:619)
  at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:216)
  at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:202)
  at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:128)
  at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:194)
  at java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:148)
  to $Proxy0.getSerialVersion (Unknown Source)
  to oracle.kv.impl.util.registry.RemoteAPI. < init > (RemoteAPI.java:32)
  to oracle.kv.impl.admin.CommandServiceAPI. < init > (CommandServiceAPI.java:48)
  at oracle.kv.impl.admin.CommandServiceAPI.wrap(CommandServiceAPI.java:55)
  at oracle.kv.impl.util.registry.RegistryUtils.getAdmin(RegistryUtils.java:197)
  at oracle.kv.impl.admin.client.KVAdmin.connect(KVAdmin.java:883)
  at oracle.kv.impl.admin.client.KVAdmin.main(KVAdmin.java:2131)
  to oracle.kv.impl.util.KVStoreMain$ 6.run(KVStoreMain.java:188)
  at oracle.kv.impl.util.KVStoreMain.main(KVStoreMain.java:319)
  Caused by: java.net.ConnectException: connection timed out
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:339)
  at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:200)
  at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:391)
  at java.net.Socket.connect(Socket.java:579)
  at java.net.Socket.connect(Socket.java:528)
  at java.net.Socket. < init > (Socket.java:425)
  at java.net.Socket. < init > (Socket.java:208)
  at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:40)
  at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:146)
  at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:613)
  ... 14 more

  I tried opensuse under virtualbox. I don't see the same problem you described.

  May I suggest make you an entry in/etc/hosts, which corresponds to the output of the hostname command and use this name instead of 'localhost' for the configuration of KVStore?

• RV 120W problem (cannot configure the router)

  Hello

  I just installed a new RV 120W to replace my dlink router.

  The problem is that I can't view site configuration (192.168.1.1)

  My internet works fine and when I go to 192.168.1.1 I can log in (with the password I set using the installation disc) but then I see the top of the site config (blue) but where the Control Panel must be I see "site cannot be displayed."

  I tried to use my laptop and pc on ports diffirent.

  I ve tried using IE9 and Chrome version 16,0,912,63

  I ve also tried to reset the router, but this has no effect.

  Can you please specify? Thank you very much!

  Kind regards

  Jesse

  Have you tried https://192.168.1.1/

  ?

  (https or http).

• Cannot configure the tomcat server instance

  For tomcat when I set up the parameters of jmx in hyperic I get the message below.  When I check via jConsole there is no java.lang.OpenFileDescriptorCount.
  How can I fix it, and why it stops the server to save the configuration and for allowing me to see what values are stats that exist?
  
  The configuration has not been set for this resource due to: invalid configuration: error recovery value: attribute not found [java.lang:type = OperatingSystem:OpenFileDescriptorCount]: javax.management.AttributeNotFoundException: no attribute: OpenFileDescriptorCount

  Hello

  This is caused by the metric "Open File Descriptor Count" is enabled by default.  You can disable this metric via Administration-> follow-up by default is-> Apache Tomcat and by placing a check mark in 'Open File Descriptor Count', then clicking on disable Collection.  This setting is disabled by default because it is not always available.

  You cannot save configuration because there is an error when checking and so the configuration is considered valid.

• Cannot configure the Pop of Hotmail on Mail account under macOS Sierra

  Hello.

  I'm on a MacBook Air - end of 2014 with macOS Sierra installed.

  I decided to perform a new installation of the latest version of Mac OS. As I did this, of course, I've erased completely any configuration, I had: this has the Mail app.

  I want to create access to two accounts different Hotmail via Mail App. Apple unfortunately, it's automatically my IMAP accounts - something I really don't like / want - and I want to create POP accounts!

  I check online on how to do it (because Yosemite, holding the Option key during the initial installation, no longer works.) I write a bad e-Mail and after trying to access it, I get an error message and automatically mail gives me the possibility to choose between an account IMAP or pop. Also, it requires me to give the outgoing server and receiving code «»

  MY QUESTION IS: What are the current codes for Hotmail? Because I searched online and after typing the (I assume) good, Mail tells me that it does not recognize my email address and/or password. (Be aware that during the execution of this, I also write my e-Mail address correctly!).

  I really need my accounts connected to Apple Mail, BUT I really need to make sure that it doesn't copy emails and not delete them from the server!

  Thanks in advance for any information you can give me.

  Ask Microsoft about the configuration necessary to initialize one of their products to access pop.

• Cannot configure the Exchange account on the iPhone 6

  I have an iPhone installed 6 9.3.2. I tried to add my work Exchange account to the native application and the Outlook application and will not work. He says no more it cannot check account details or it asks me to check the user name and password. My exchange account will not also add to my old iPhone 4S or iPad 3.

  Other users of the iPhone to work added to their Exchange accounts without problem. Mine is the only one Exchange is aware of this does not work. They were not able to help. There is no IMAP settings, so I can only add an Exchange account.

  I tried to reset the network settings, but that didn't help. I even tried the soft CloudMail and does not work either.

  Any ideas?

  I saw a few times at my work. Cause is more than likely the local rather than on iPhone, mail server because it does not work in the Mail as Outlook App application.

  It could be that the settings on the e-mail server does not have Activesync devices – might be useful to check with HER to see if they enabled that.