Cannot connect as admin

Similar Questions

• Cannot connect to Admin page

  Hi guys,.

  After a power failure, the virtual environment is down.

  At reboot, vCOPs service returned to Foundation mode even if it is allowed with a key Advanced Suite.

  
  

  I tried to re-register vCOPs with the vCenter server but cannot connect more to the page/admin.

  By clicking on Login button that it remains a "check login information." literally 5 minutes then fails with a "General error has occurred."

  I checked the disk space on/data on both virtual machines and it is less than 10% used so it is not a question of space and so I did not add a new measure/data disc (see KB 2016022).

  I've done the usual audits of common sense but no luck...

  I need your help guys

  THX,

  Didier

  Hello

  I got the same question but used 2013358 KB to fix.

  I ran the script resetadminpwd.sh that came out with the error: "the password was not correctly reset" because of the command of psql not found... but it worked on the UI VM.

  Note that I used the same password that previously set, which violates the new requirements of the SP2 SLES-password only my root password was to be performed.

• Cannot connect as Admin user in a new installation of the workspace 2.0

  I was hitting my head on my desk and I was wondering if I lack just something. I'll put in space 2.0 using EGGS and when I set up the username admin and the password that I can not make it unique. In fact, it uses my newspaper AD in when I don't even have these setting again. If someone could just tell me how to change that, it would be great. Thank you!

  Jared

  Hi Jared,

  Thanks for the clarification. The user name on the license key cannot be changed, it is hardcoded to "admin". You can use this user name and password to connect to the ISU following Admin

  https://Configurator-VA.domain.com

  https://connector-VA.domain.com/HC/Admin/

  https://gateway-VA.domain.com/SaaS/login/0

  If you want to connect to the admin of https://gateway-va.domain.com or https://gateway-va.domain.com/as an administrator, you must log on as a user you specified as the Bind DN.

  https://gateway-va.domain.com/SAAS/login/0 and https://gateway-VA.domain.com/ admin that both take you to the same functionality. The only difference is that the former allows you to connect as a user no AD.

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• cannot connect as admini. for something!

  a friend was on my computer, it has changed a bunch of parameters & did something? now, I can not connect to as admini. He says Word of pss evil that I tried to do a cope of the password to change & it doesn't let me do everything that needs the admini. I can't access!

  Here you go:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Use system restore to set Windows to a point before the injury has been caused by your friend.
  3. Instead of giving your friend one and the only password on your PC, to plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• Cannot connect to all accounts under windows 7 Professional. Too locked admin account.

  I'm trying to connect my Windows 7 Professional computer. Normally, it ignores the screens account all together and auto connects when I turn on the computer. My account has no password. Today, when I booted up it he went into a log on screen with my account and 'another user' option I've ever seen elsewhere. I can't log in to my account. When I try it says he said: "you cannot connect because the ögon method you use is not allowed on this computer. See your network administrator for more information." There are no other accounts on this computer and I have an account admin is there something I can do? I can't do everything. Thank you!

  Hello

  -You're on a domain network?

  -Have there been any changes made on the computer before the show?

  -What happen when you try to connect through the other user? You are able to boot to the desktop?

  I would suggest trying the following steps and check.

  Case 1: Group Policy "" Allow the local newspaper"was not set up to allow users or users of the domain. Configuration allow users or domain users to connect to the computer or the domain, you must add users or users of the area to "allow the local newspaper. Please follow these steps to add users.

  1. Run gpedit.msc.
  2. expand Configuration ordinateur\parametres securite\strategies windows\parametres
  3. click on user rights assignment
  4 4 veiller ensure that "Allow the local newspaper" includes administrators, backup
  Operators, domain users or users.

  Case 2: Group Policy "'Deny log on locally' has been installed to deny users or users of the domain. For the installer allow users or users in the domain to connect to the computer or local domain, "Deny log on locally" must be empty or no user or users of the domain in the list. Please follow these steps to remove users or users of the domain of the 'Deny log on locally '.

  1. Run gpedit.msc.
  2. expand Windows Settings\Security Settings\Local Policies
  3. click on user rights assignment
  4. make sure that "Deny log on locally" is empty.

  Case 3: Local group policy allow for user logon. However, group policy domain that overrides the local policy does not allow users to log on locally. The resolution is to modify the domain policy to allow users to log on locally.

  Case 4: The domain policy allows domain users to log on locally, but is not the local policy and domain policy does not apply to the computer. The fix is running gpupdate to force the update of the domain policy.

  Case 5: Norton Firewall blocks communications between the domain controller and the client. The solution is to disable Norton firewall or reconfigure to grant access to the domain controller.

  It will be useful.

• Cannot connect my Satellite L20 to AP

  Hello
  I have a satellite L20-214, just bought it and an edimax 7205 ap.
  Both supported the 80211b specifications.
  Access to the AP is completely open!
  But I can't get the laptop to connect.
  He sees the network in the list, but it just cannot connect to it.
  I tried all settings,
  The access point works perfect with smc cards and a few old books.
  I set all the possible settings in the config of Toshiba, disabled the encryption, change the channel to 1 because it is the channel of pref. of the ap and choose 80211b as prim.

  For now, I'll give some further tests before I have to return the laptop to the store because it's brand new.

  But I hope someone has an answer for me.

  [Edited by: admin on 28 May 06 06:28]

  Hello

  Also check if you can find the latest version of the driver for the WiFi card. Also check Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• NSLU2 - cannot connect a network - xp home sp3 drive

  Hello!

  I have a network of two xp machines connected to a wrt54gl router (dhcp) a xp pro and XP home.

  I bought a NSLU2 unit. I successfully set up according to the instructions of a xp pro machine with a USB plugged into the port of disk1. It shows on this fine machine as a network device, as well as two shared folder (admin and disk1) without further delay. (A minor hiccup: I tried to serve as a dhcp client, but I couldn't for some reason, but it works very well with fixed ip.)

  However, on xp home, I can't connect at all. It does not appear in the My network, cannot connect to it with-. I can see the device in my work group, but that's it, if I click on explore, it hangs for a while, then gives a "no access, no doubt you have no authorization" error.

  I can still access it from the web interface, but otherwise no luck.

  I tried to create a user on the NSLU2 web interface with the same name as the users private XP, without success.

  Someone has an idea what to do?

  There is a resounding slap on my forehead. It was through the firewall.

  (Although now, I do not understand, how NSLU2 forced on another machine with the same parameters...) I just had to add the slug of the IP of the zone of confidence.

• WRT54GL establishment cannot connect to the Internet

  I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet.  Why the hell not?  I am writing on the same laptop, using the same ADSL modem and Internet connection.  So why don't the router sees it?  The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of.  I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked.  So I tried both.  Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet.  Power, then turn on the DSL Modem. "I did already too many times to count.  And again I say, this direct DSL connection of the modem for my laptop is fine.  But when the cable Internet through the router, then the other wire goes to my laptop, no Internet.  All the time my DSL modem displays a green light for the Internet.  And the router shows a light on the Internet.

  I'm too tired to walk any further tonight.  Maybe someone has a simple suggestion.  I'll check tomorrow.

  Thanks for helping this rank amateur.

  Try to configure the router manually.

  Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  Follow this link to configure the router with DSL Internet Service.

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect because windows 7 does not recognizse my profile

  Original title: Mr. Wall

  Cannot connect because windows 7 does not recognizse my profile

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch

• AdminServer cannot connect to NodeManager on remote machine

  Hello

  My configuration is:

  OPERATING SYSTEM. Red Hat 6.6

  WL 12.1.2

  Machine 1. AdminServer (7001). ManagedServer1 (8001). Nodemanager (5556).

  Running in production mode. Nodemanager username and password specified during installation with the domain creation wizard.

  Machine 2. Server managed (8002). Nodemanager (5556).

  Machine 2 was created using pack/unpack the domain on the computer 1.

  Nodemanager starts in the 1 machine and is accessible from the administration server.

  Nodemanager seems to start OK on machine 2. I get the correct log message "Secure socket listener started on port 5556, localhost/127.0.0.1 host." However the machine 2 is not accessible by Admin Server.

  Admin Server error reported when I check the State of the machine is:

  «< 14 may 2015 15:48:53 IST > < error > < NodeManager > < BEA-300033 > < could not execute command "getVersion" on the NodeManager.» Reason: "Connection refused. Cannot connect to NodeManager. Verify that they are running at 10.100.0.90:5556. ». ' > '.

  Things I've tried:

  1. register (using nmenroll) nodemanager on machine 2 to the administrator of the server. This seems complete ok.

  2. change the nm_password.properties on Machine 2 to make sure that they match the credentials that are used during creation (those in the admin under fields, security, advanced console).

  3. and double check the following: IPs of the Machine. parameters of nmenroll. config.Xml.

  Any help much appreciated.

  Thank you

  Nodemanager seems to start OK on machine 2. I get the correct log message "Secure socket listener started on port 5556, localhost/127.0.0.1 host." However the machine 2 is not accessible by Admin Server.

  and later

  " "

  Manager of the nodes on the machine 2 is listening on "localhost:5556" which is not accessible from the machine 1. Try to configure two instances of Manager node for listening on a different address "localhost".