Cannot connect Cisco 2621 to AWS EC2 Openswan vpn site to site

Similar Questions

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• cannot ping remote ip on ASA no firewall (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  some help me

  (Q) ping remote ip unable on ASA is not Firewall not on pc (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  Note - I can ping PC but not the same subnet ip on ASA2 L3

  PC---> > ASA1 - ASA2<>

  Hi Matt,

  Let me answer your question in two points:

  • You cannot ping an ASA on another interface other than the one where you are connected to the ASA of.

  For example, ASA1 and ASA2 are connected through their interfaces 'outside '. ASA1 (or any other device on the external interface) can not ping/access ASA2 on his (ASA2) within the interface. The only time wherever this can be substituted is a tunnel VPN with the command "access management" configured for other interface, for example management-access inside

  • Traffic ASA1 ping to a remote client behind ASA2 won't over the VPN tunnel and as such is not encrypted. That's because ASA1 will forward traffic based on its routing table that probably this way through its 'outside' interface Except that traffic is allowed with the ASA2 (using the ACL), it will fail.

  We can do on the routers of sourcing our ping to another interface, but it will not work on the SAA.

• Cannot connect Cisco UCCX Appadmin

  I'm running a Cisco Unified Voice Infrastructure where I can not connect to the UCCX server over https link to the IP address of the server. But I can ping the server, I can even connect using CLI mode. But I am not able to connect using the Web GUI. Using Firefox as browser it displays "Secure connection has no" - "an error occurred when connecting to 145.17.58.4:8443. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key) ".

  I use google, read the administration guide and sought the support of the community but could not find a specific remedy for the issue. How can I fix it and connect to the server?

  Community rocks! Thanks in advance.

  Hi Soledad,

  It seems to be hitting bug id CSCuu83416 IE when you use Firefox to access a Web page that is affected by this issue, the following message may appear:

  Error: An error occurred during a connection to :. SSL has received a low ephermeral Diffie-Hellman key in handshake of the server key exchange message. (error code: ssl_error_weak_ephermeral_dh_key)

  You can try below workaround to solve this problem.

  (1) in FireFox, enter "subject: config" in the URL field and press to enter.
  (2) accept the warning "this might void your warranty!
  (3) in the top search field, enter "security.ssl3.dhe_rsa_aes".
  4) double-click on each result (128, 256) to pass the value to "false".

  This should fix the problem.

  Thank you!

  Kunal

  (Please indicate all useful posts)

• Cannot connect day 1000 Photo Frame to the Flickr site

  I try to sign in to my flickr account form the journe air 1000 and it says that the user exists.
  I can access flickr from my computer very well.
  I can connect to picasa of day without problem.
  I tried the two username or [email protected] without success.

  Help, please!

  Hello

  Have you tried to create a second account on Flickr, and then connect the 1000 of the day to the Flickr service?
  I have no idea why the connection to Picasa works and not the Flickr connection
  But at the beginning I advise to use another account
  It s worth a try

• Cisco router 1921 internet problem with a site-to-site vpn connection

  I have TE-data Modem 3com dsl connection in 2 sites. and I have 2 routers cisco 1921 and there is a vpn site-to-site between them and

  the VPN connection works well. and I configured the PAT on one of them to allow users access to the internet but tere is a problem:

  all users can ping a public ip address

  all users can ping any URL

  but there is no navigation of the internet

  and it's configuration

  NOZHA #sh run
  Building configuration...

  Current configuration: 2425 bytes
  !
  ! Last configuration change at 11:24:08 UTC Thu Sep 20 2012
  !
  version 15.0
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname NOZHA
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5
  !
  No aaa new-model
  !
  !
  !
  !
  No ipv6 cef
  IP source-route
  IP cef
  !
  !
  !
  IP dhcp pool 1
  network 192.168.40.0 255.255.255.0
  router by default - 192.168.40.1
  4.2.2.2 DNS Server 8.8.8.8
  Infinite rental
  !
  !
  IP domain name shady2012
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  license udi pid CISCO1921/K9 sn FCZ1432C5KM
  licence start-up module c1900 technology-package securityk9
  !
  !
  !
  redundancy
  !
  !
  !
  !
  crypto ISAKMP policy 10
  BA aes
  preshared authentication
  Group 2
  ISAKMP crypto key shady2012 address 81.10.xxx.yy
  !
  !
  Crypto ipsec transform-set shady2012 aes - esp esp-sha-hmac
  !
  card crypto 150 s2s - VPN ipsec-isakmp
  the value of 81.10.xxx.yy peer
  PFS group2 Set
  match address s2s-vpn-Oly
  !
  !
  !
  !
  !
  interface GigabitEthernet0/0
  MTU 1000
  IP address 41.41.xx.yy 255.255.255.252
  NAT outside IP
  activate nat IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  s2s - VPN crypto card
  !
  !
  interface GigabitEthernet0/1
  192.168.40.1 IP address 255.255.255.0
  IP nat inside
  activate nat IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  !
  default IP gateway (hop 41.41.xx.yy) next
  IP forward-Protocol ND
  !
  no ip address of the http server
  no ip http secure server
  !
  The dns server IP
  overload of the IP nat source list mypool GigabitEthernet0/0 interface
  IP route 0.0.0.0 0.0.0.0 41.41.xx.yy
  IP route 192.168.20.0 255.255.255.0 (41.41.xx.yy) next hop
  IP route 192.168.30.0 255.255.255.0 (41.41.xx.yy) next hop
  !
  mypool extended IP access list
  deny ip 192.168.21.0 0.0.0.255 192.168.20.0 0.0.0.255
  deny ip 192.168.21.0 0.0.0.255 192.168.30.0 0.0.0.255
  deny ip 192.168.40.0 0.0.0.255 192.168.20.0 0.0.0.255
  deny ip 192.168.40.0 0.0.0.255 192.168.30.0 0.0.0.255
  allow an ip
  s2s-vpn-Oly extended IP access list
  ip permit 192.168.40.0 0.0.0.255 192.168.30.0 0.0.0.255
  IP 192.168.21.0 allow 0.0.0.255 192.168.20.0 0.0.0.255
  IP 192.168.30.0 allow 0.0.0.255 192.168.40.0 0.0.0.255
  ip licensing 192.168.20.0 0.0.0.255 192.168.21.0 0.0.0.255
  ip permit 192.168.40.0 0.0.0.255 192.168.20.0 0.0.0.255
  IP 192.168.21.0 allow 0.0.0.255 192.168.30.0 0.0.0.255
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  password
  opening of session
  !
  Scheduler allocate 20000 1000
  end

  If anyone has the answer please answer ASAP

  When you say can ping any URL, I am assuming that you are pinging of the FULL domain name, IE: it is resolved to an ip address, right?

  If you disable the VPN, can you access the internet?

  You have a proxy server or anything that could block navigation?

  This error message you get on your web browser?

  Also try another web browser, and none works?

• Please give index on configuring vpn site to site on 881 to ASA 5505 cisco router

  Earlier my boss asked me to prepare to implement the VPN site-to site on router Cisco 881 Integrated Services to ASA 5505 router, which is now running on the side of HQ. Someone please give me a hint. I am now learning the pdf file from Cisco that mention how to configure VPN site to site between 1812 Cisco IOS router and router of the ASA 5505 using ASDM V6.1 and SDM V2.5. Cannot find the book for the Cisco 881 device.

  Someone please please suggest me something as soon as POSSIBLE.

  Thank you

  CLI version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807ea936.shtml

  ASDM and SDM Version:

  http://www.Cisco.com/en/us/partner/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

• Comments Win XP cannot connect to the network when Cisco VPN works on Mac

  Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

  I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

  Config

  -Fusion - Version 3.1.0 (261 058)

  -Mac - 10.6.4

  So far, I have tried the following

  -started to merge and XP without VPN on Mac - OK (bridge autodetect)

  -launched VPN to work, and then launched Fusion - no network

  -tried ipconfig/release, ipconfig / renew - not always no network

  -tried NAT - do always no network

  Thanks in advance. For any help or suggestion will be greatly appreciated.

  Bernie

  The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

  Do not work the real on 10.6.4 cisco software unless you really need to.

• Cannot connect to internet after connecting to VPN Cisco ASA 5505

  Hi all

  I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,

  VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.

  I paste the Configuration for the investigation, although he's trying to help me.

  ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host  object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer  crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749     30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104     0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86     4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130     1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30     3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7     0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30     0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d     de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b     297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273     ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3     3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363     3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403     02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca     a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8     ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792     6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d     398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708     fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39     73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd   quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group  type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class   inspect esmtp   inspect sip    inspect pptp   inspect ftp   inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end 

  Thanking you in advance

  Hello

  If you want to have Split-tunnelin in use. One you have patterns for.

  Then you will need to fix the configured "private group policy" under the "tunnel - private-group

  tunnel-group private general-attributes

  strategy - by default-private group

  Then reconnect the VPN Client connection and try again.

  After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.

  -Jouni

• Some devices cannot connect to X 2000

  Hey guys, I've been setting up my new router Cisco X 2000 wireless recently and I have that works well for my laptop/desktop computers and even the PS3, but for some reason when you try to use the wireless on some of the other computers in my house it does not work unless you use a wireless guest account.

  Can someone point me in the right direction? I can't imagine what could be the cause.

  Oh and also, I use the Version of the Firmware: v2.0.01 if this is useful.

  Thank you

  James.

  you have security wireless for your network? What is the security mode used?

  computers that cannot connect to the network is not compatible with security for your network.

  to resolve this problem, you may need to obtain an updated driver for the computer's wireless network adapter.

• connect Cisco VPN client v5 to asa 5505

  I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.

  Cannot ping asa 5505

  Any ideas on what I missed?

  Try adding...

  ISAKMP nat-traversal crypto

  In addition, you cannot ping the inside interface of the ASA vpn without this command...

  management-access inside

  Please evaluate the useful messages.

• VPN with cisco 2621

  Is it possible to set up a vpn between a cisco 2621 and a windows xp with dynamic IP (adsl connection, I can use the home network.

  I would be grateful all documentation.

  Cisco Internetwork Operating System software

  IOS (TM) C2600 software (C2600-I-M), Version 12.2 (8) T, RELEASE

  SOFTWARE (fc2)

  TAC support: http://www.cisco.com/tac

  Copyright (c) 1986-2002 by cisco Systems, Inc.

  Updated Friday 14 February 02 14:21 by CCIC

  Image text-base: 0 x 80008070, database: 0x80A28688

  Any version with the minimum set of features IPSEC and the easy vpn server support would solve your problem.

  Did she help?

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Cannot connect to apple tv for Mac OS Sierra

  Hello

  I upgraded my Macbook Pro (Mid 2012 retina) to Sierra de MacOS. When I am trying to connect to apple tv by clicking on the AirPlay icon and click on my Apple TV it asks me to insert a password! Apple TV displays an access code and I use it but it gives me this error:

  Cannot connect to 'Apple TV'

  I upgraded my Apple TV to the last tvOS (10.0). And it gives me the same error.

  I tried to turn on the access code and password on Apple TV AirPlay adjustment but same error. Off, same error.

  Help, please.

  Thank you

  Hooman

  Did you get anywhere with this? I have the same problem.

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?