Similar Questions

• Where can I find the Bluetooth driver to connect my Samsung SCH-U640 phone to Windows 7?

  I need driver to connect my Samsung SCH-U640 phone to Windows 7 Home Premium. Where can I find this driver?

  Hello

   
  I suggest to visit the following link and enter the subcategory, the name of the model and the model code to download the necessary drivers.
  
  http://www.Samsung.com/us/support/downloads/Verizon-Wireless/Sch-U640EKAVZW
  
   
  Check if it helps.

• How to connect Agilent 8163 b via the serial port

  I have a problem connecting to the serial port with Agilent 8163 b. The driver that I use is driver_vxipnp_816x_4_1_4.exe. The problem always message display "Visa resource not found. Check the HPIB-Bus address"when I use the components inside the"hp816x tree.vi ". However, I have no error if I use normal read and write VISA.

  Y does it can someone help me answer my question? Thanks in advance.

  Thanks for the reply.

  I face a problem that you use with GPIB-USB-HS due to the physical dimension, as shown. The width between the remote locking connector (FIR) and (w1) GPIB connector to the appliance is too small for the GPIB-USB-HS (w2) connect to this topic. If I unplug the connector RIL, tunable Laser will not be activated. So I have a few questions as follows.

  1. the LabView can always activate the tunable Laser if I unplug the connector at RISK in my case via GPIB?

  2. the LabView is compatible with GPIB connector (model x 10833) Agilent?

  3. is there a way to solve the problem posed by the RIL connector unplugged?

  The drop box

  P/S: version please is 4.84 to 8163 b.

  Thanks for the help and I'm too new in this field.

• Cannot connect a Samsung Galaxy S3 to my new HPDJ2542

  I've done everything I can do to get this thing going. No problem at all. Allows to print from my computer, the iphone and the ipad, but he refuses to work with my phone GalaxyS3, or maybe my phone will not work with it. I studied everything I can find and I'm coming up with nothing. Any help?

  Hello

  Please use the following apps:

  https://play.Google.com/store/apps/details?ID=com.HP.Android.print&hl=en

• Cannot sync to the device via the serial port

  I have to read the data with a DSP associated with an EKG. For this I need 5 bytes (0x00 0x80 0x00 0x80 0x00) in a specific order that are sent through the port every second. I followed the data sent via the port and these 5 bytes are actually get received, however I havnt managed to find with my VI. I tried many different ideas without success and maybe Im doing something wrong. My latest attempt uses a waiting on event so I won't miss all the data. Ideas? See what I'm missing?
  I'd appreciate any help!

  I think you are using the wrong function.  You use Match true/false String.  Said context-sensitive help "examine beginning of string to see if it matches the true or false string. This function returns a Boolean TRUE or FALSE value in the selection, depending on whether the string is true or false string. "Well, suppose that the string isn't everything at the beginning, but as another byte in front of her?  It will not find the search for string.  And the wiring of the same search in True and False are strange because if it is found, then it is both true and false at the same time.

  You should use search and replace or search/Split string to determine if and where the search string is inside the largest chain.  (I would take research/Split).  If the string is not found it returns-1, otherwise it returns the location of the string.  And it has the advantage of any return after the game you could feed in the shift register for a search on the next iteration.

• Property node (arg 1) visa set up a Serial Port (Instr) .vi-> Untitled 1. VI

  Hello

  I'm trying to connect an instrument stahl ER-300 with labview. The Stahl is connected to my laptop via a serial port/USB converter.

  When I run the program, I get this error property node (arg 1) visa set up a Serial Port (Instr) .vi-> Untitled 1. VI

  the driver of the converter is set up and my phone is read as a COM4 and I Don t understand why I get this error.

  The program is attached.

  I need your help

  The error indicates that an input parameter is not valid to configure serial port VI... have you checked that you had wired up to this node correctly?

  Down VI serial port configuration and...

  

  It is not wired! Thread resource name VISA through the VI.

• Communication serial port IRP_MJ_READ

  Hello, I would ask you serial port communication. I am currently apply for communication with my engine not to not (Microcon), but it does not work. If I try to connect with the original software, my serial port monitor gives me values

  IRP_MJ_WRITE when I write some values and

  IRP_MJ_READ when I try to read from the serial port

  But when I'm using LabView, I can only send IRP_MJ_WRITE function by using the component to write VISA (if this one works well), but when I use VISA component read my serial port monitor gives me only IRP_DEVICE_CONTROL. Do you have any sugestion where can be a problem? I don't know how to get this function IRP_MJ_READ using LabView VISA component.

  You watch the using PortMon software? The only thing I see here is that the order that you send, there could be a space that you could have made while typing,

  or

  You're still motor control software running step by step when running the labview? In this case, there will be conflict.

  When you use software original stepper motor and when you send the command wirte down the hexadecimal value (see portmon or any other monitoring software) and try to send back the same hex values using labview. Sending a command, sending of hex are the same but just give it a try,.

  Use bytes depending on the port before VISA to read all available data.

  Search for Microcon network drivers driver Instrument in the Web site OR if you want a quick and simple solution.

• serial port read one character

  Hello

  I'm new to the forum, so I don't know if I'm posting this question in the right place.

  However, my problem is I'm trying to communicate via serial rs-232 port and the goal is to read and write the question (code) of the device.

  The Unit regularly sends a "perpetuate" character S. When I read this character, I write the question and receive the response. Then a S appears again and I bravado the code, read the answer and so on...

  The problem is that when I try to do everything at once (read S, send the code and read the answer) and it 14 times before reaching the 1st code again once, labview is very slow. (3-5 seconds to perform this tasks 14 and restart the process). I think that the program becomes slow because that way I'm not using all the S which inflamed the writing and reading process.

  So, I wanted to read character by character (byte-by-byte) and then create a table with the answer. The problem is that the buffer sends answers with several bytes and I can't build an array in 'real time', beacause if I read (read VISA) only one byte, then I would be lost all the others.

  I think that chains concantenate and shift registers are part of the solution, but I have too many problems until I get to the part.

  So, please help me to read a single character and doesn't lose not the other bytes sent by the buffer, in order to fix the process, because I want one second per second refresh. The device emits a flow rate of 19200 baud.

  Thanks in advance

  I think that if you connect the value 1, the reading serial port function, you will receive a byte, and you won't lose the rest.

  The rest are stored in the buffer. If you use the previous function again, you will get the next byte.

• serial port: input/output signal combined suburbs

  I am currently using LabView to replace another user for a scientific instrument interface.

  LabView is connected to this unit via a serial port.  The instrument spread 25 bytes of binary data from the computer every second.  I can read the binary string (Read VISA) and maintain will cause disc using a while loop.  In addition, there are some instructions I can send to the device that will do various functions (start logging, turn the LED on / off, etc.).  I can send these instructions to the instrument using the previous interface and in a stand-alone vi using VISA Write successfully, but when I place the function Write VISA in the largest interface vi, signals go haywire.  Specifically, there are two separate lights I can alternate with two different commands, but when in the biggest interface vi, the two commands Toggle the LED even.  In addition, it seems that the singal that immediately send to the instrument (a single ASCII character) bounces to the computer in the 25 bytes of binary data streaming.  In other words, after I pressed the LED 'on' the key, a column of my streaming data changes when it's not supposed to (ex: after binary to ASCII conversion, changing a single digit in a 20 digit value).

  At first, I thought that the problem was the sequence of read/write VISA.  I read all the data in the current configuration, and then leave for orders writing.  The two VISA functions are in the same loop to continuously monitor the data.  Is it possible the signal output of writing not letting the while loop and being read as input?  What would the instrument two different commands as the same as read?  My goal is to run an interface that displays data in ASCII and allows some options different rocking while that the interface works - there is an elegant/effective way more as a while loop?

  ~ Going bananas

  
  

• HELP "the mac cannot connect to iCloud by.

  
  

  I had this problem for over a year now and no solution possible.

  
  

  "the mac cannot connect to iCloud due to a problem with"iCould id", open preferences to iCloud to solve the problem"

  
  

  
  

  I have tried every single solution available on the internet, tried deleting tried Keychain Icloud signature and signing in again once I've even installed a clean but nothing seems to solve this persistent problem.

  
  

  I would really appreciate if you guys helped me with it.

  Thanks in advance

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  ls -@BOaen L*/Keyc* | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• The Mac cannot connect to iCloud extremely disturbing and annoying pop up

  I get this pop up and I can't fix it:

  The Mac cannot connect to iCloud due to a problem with "myappleid".

  Preferences iCloud open on this issue.

  Two buttons - Later and iCloud preferences...

  If I click later, he reappeared in the minute, sometimes a second later. It is a big problem because the functionality of the command does not work. He also grabs focus, no matter what I do - I watch full-screen movies, writing in a web form, play games, out of a keynote with a client presentation. Very, very frustrating. Not the kind of behavior I've seen in Windows 2000

  If I click on iCloud preferences I receive a request to enter my Apple ID password in the Panel of the iCloud system. I have enter my password and get an error not found Keychain with the message box:

  Impossible to find a keychain to store "281711789."

  Two buttons - Cancel and reset to the default values

  If I click Cancel the previous password box returns "an unknown error has occurred." The problem goes away, but I have the original pop up within minutes.

  If I click on Reset to Defaults, I get a very scary message:

  Are you sure you want to reset your

  Keychain? This will delete all your saved

  Passwords, keys and certificates. You

  It is not possible to undo this operation.

  
  

  Two buttons - Undo and Redo

  
  

  Cancel takes me to the first problem, regular and extremely annoying and disruptive noise upwards.

  
  

  Reset is not an option! I have an ecosystem whole apple, phone, office, laptop and iPad. I need to fix my keychain but don't know what's wrong with it or how to fix it. I can open Keychain Access. I don't know if it is possible to save a set of keys and to reimport?

  Any help, especially a working solution, greatly appreciated.

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  ls -@BOaen L*/Keyc* | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• A Wi - Fi connection does not have an IP address and cannot connect to Internet

  Here's my question:

  "Wi - Fi doesn't have an IP address and cannot connect to Internet"

  But he connects.  I use the model of airport Time Capsule ME182LL/A and the last OS.

  The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.

  Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'?  It doesn't have a green dot next to the Wi - Fi connection and it says connected.  I'm puzzled.

  Thanks for any idea that you can provide.

  Something wrong with the Setup program.

  After the airport utility screenshots of the configuration of TC.

  In particular this modem do you have? Actual spending brand and model please.

  Who is your ISP?

• OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

  Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

  Any suggestions?

  Hi @dburbage,

  I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

  Thanks, I look forward to hearing back on your part.

• I have two windows xp computers, you try to transfer files with wiz trasfer via cable to serial port 9-pin computer of nothingness cannot find a cnnection to each other?

  Transfer Wiz a autodetec but did not find the connection, have a new p pin serial cable, is there a way to check the connection

  Hi albert-43,

  The RS232 serial cable is different from cross-over cable. A serial cable is to hang the two components that are not the same, a computer to a router, etc. A crossover cable connects two similar items such as computers, etc. from router to router.

  You can also contact a local online techshop/search if you want to buy a crossover cable.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.