Cannot connect on rman after the user sys password change
HelloAfter to change the password for user sys does not connect with: target rman.
Can someone help me?
Eder
OK, good luck, if your problem is resolved, examine fence wire and reward the answers 'correct' and 'useful '...
Tags: Database
Similar Questions
-
Computer cannot connect to internet after the user changed network name
Original title: "Network__".
We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?
You gave your PIN #?There should be a reset button on your access to restore your system toby default. Of course, you will then have to re-enter many of yoursecurity data, unless you have saved it."Artic Auto Air" wrote in messageNews: 92aa11d3-77ea-4680-b04c-c415b59e2c66...> We provide free wifi in our lobby and yesterday a man asked our pin #.> so he could get on the internet, we discovered after leaving one of our> computers cannot connect to the internet because the name of the network shows now> like its computer network and there need a code key passes and the password, how> We turn off and back to ours? -
Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot
Hello
I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?Long story short, after several relocations (refresh option), I've noticed as a result of behavior:1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.2. when I restart the computer and any time after that, is STOP WORKING.Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).Help me please, since this is quite irritating :(Hello
I finally found the problem.The invisibility of the active network has pushed me towards the answer.biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.This should be corrected, as it would be a great help in this scenario.TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story). -
Unable to connect using string using the user sys Linux linus connection
Hello
I am facing problem in the use of connection string when you connect as user sys on Linux OS
For example:
When I connect as
sysoracle/sys as sysdba its connection.
But when I provide the connection string as sys/sysoracle@TEST as sysdba its display with the error like:
ORA-12505: TNS: listener is not currently know of SID in connect descriptor
Any help will be benefitial for me
Thanks and greetingsSave your listener.ora as this with Oracle Home location has changed and that the reboot,
SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = E:\oracle\product\10.2.0\db_1) (PROGRAM = extproc) ) (SID_DESC = (GLOBAL_DBNAME = TEST) (ORACLE_HOME = E:\oracle\product\10.2.0\db_1) (SID_NAME = TEST) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = oracle)(PORT = 1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0)) ) )
HTH
Aman... -
Cannot connect to admin account (the user profile Service failed)
Hi all
When I try to access my admin account, well I typed my password, BUT this message appears:User profile service failed
User profile cannot be loadedI can get my guest very well account, but can not use my admin... anything that can help please!
Anyone who can help would be greatThis problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215
-
Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?
HI, Satellite L70 - A - 13P
I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!
I keep the key pressed F2 but nothing works.
I also tried ESC, F1, INS, F12, 0.Help.
User and supervisor password the same?
Have you been able to get into the BIOS in the past?Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.
-
Unable to connect even after the user password reset
Hai all,
10.2.0.3 on Linux
Reset a user password and the user is unable to connect as you can see below
[oracle@testdb 10.2.0] $ sqlplus sys/Manager as sysdba
SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
Copyright (c) 1982, 2006, Oracle. All rights reserved.
Connected to:
Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
With partitioning, OLAP and Data Mining options
SQL > alter user sysman identified by oracle.
Modified user.
SQL > disconnected from Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
With partitioning, OLAP and Data Mining options
[oracle@testdb 10.2.0] $ sqlplus sysman/oracle
SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
Copyright (c) 1982, 2006, Oracle. All rights reserved.
ERROR:
ORA-01017: name of user and password invalid. connection refused
Unable to connect even after the user password resetCheck
How to change the password of the database user Sysman (DB control repository schema) [ID 259379.1]
EMCA 11 g fails with the error "ORA-01017: name of user and password invalid; connection refused"and" username/password invalid name; For DBSNMP or user SYSMAN"[ID 741530.1] -
Why cannot connect with DB after control DB console configure NetMgr/NetCA?
People,
Hello. I am running Oracle Database 11 GR 1 material in Oracle Linux 5.
Before you configure Net Manager/Net CA, database https://localhost.localdomain:1158 control console / em, SQL * more and Developer SQL to connect to the Instance of database DB1. All instructions SQL runs correctly.
After Configuration Manager Net/NetCA, all the tools of Admin above cannot connect to the Instance of database DB1 is the only case of DB.
What I've done is added 2 headphones more in Net Manager.
The original listener does not change which properties are: Protocol TCP/IP, Host localhost, Port 1521
Can any folk tell me what causes all the administrative tools cannot connect with DB1 after configure NetManager/NetCA?user8860348 wrote:
People,Hello. Thanks much for the reply.
ORACLE_HOME/bin directory, the command. / sqlplus SYS/SYS used to run correctly after the installation of the database. But after stopping Linux operating system, the command. / SYS/SYS cannot connect with Dabase more sqlplus.
I think that the command. / emctl start dbconsole should start to the top of the database. Am I wrong?
NO, you're not correct.
>
Is there another way to start the database?
sqlplus
/ as sysdba
startupas shown below
BCM@BCM-laptop: ~ $ sqlplusSQL * more: Production release 11.2.0.1.0 Sun Jul 17 20:05:09 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter the user name: / as sysdba
Connect to an instance is idle.SQL > startup
ORACLE instance started.Total System Global Area 1553305600 bytes
Bytes of size 2213656 fixed
1275070696 variable size bytes
268435456 buffers of data bytes
Redo buffers 7585792 bytes
Mounted database.
Open database.
SQL > -
eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work
Hello
as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk
then do a restore of the system of breast
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
and to read this information to try to fix the user profile cannot be loaded problem
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip. It is on the login page. My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.
I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files. How can I fix the desk top to coinside with his status of being online. Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.
Home Group is Windows 7.
Here is the Vista Forums.
What operating system do you use?
Vista info below:
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.
Hi Carol_971,
- Did you the latest changes on the computer?
- You have security software installed on the computer?
Method 1
I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.
How to connect to your Windows XP-based computer if you forget your password or if your password expires
-
"Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please
Go to Safe Mode and do a system restore. See the link below:
The user profile Service has not logon. User profile cannot be loaded
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8Follow the links on the post.
-
Failure to logon with the user SYS: ORA-01031: insufficient privileges
Hello
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
OS: CentOS 5.5
I can't log in with the user SYS via PL/SQL Developer. I get the message: ORA-01031: insufficient privileges. PL/SQL Developer is installed on Windows 7 Professional. Version of the Oracle Client is 11.2.0.1.0. However, I connect successfully with SYSMAN and SYSTEM.
For those who may wonder if I try to connect 'as sysdba' when I use the SYS user, the answer is YES, I do.
In addition, I think that the name of the tool (PL/SQL Developer) does not matter because I think I'm going to face the same error with any other tool (but I mentioned just in case).
Server side, I have no problem with the SYS user. I can connect via SQLPlus with connect / as sysdba or connect "virtue sysdba" without fault.
The sec_case_sensitive_logon initialization parameter is set to FALSE
SQL > show parameter sensi
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
SEC_CASE_SENSITIVE_LOGON boolean FALSE
I use the local name to connect and client side, I have a tnanames.ora file. The sqlnet.ora file looks like this:
I read in this forum (another thread) on the use of a password file. I created a password file using orapwd this way:SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
where I replaced "a_password" with the SYS password.orapwd file=orapwDB11G2 entries=100 ignorecase=y password=a_password
In fact, I'm not sure that the customer is influenced by the file password anyway because I said to use a local naming.
Clues?
Thank you very much!So your ORACLE_SID is planet but not DB11G2 , second password file must be located in $ORACLE_HOME/dbs location if you want to connect the planet of database/sid and therefore
orapwd file= $ORACLE_HOME/dbs/orapwplanet password=syspass
Then try again.
-
Do independent myRIO after the user has defined guidelines
Greetings,
I have a labVIEW VI that I write instructions in a text file on the myRIO and then the myRIO executes these instructions.
I have seen tutorials that start the myRIO as a standalone application. But I need only become independent once the user writes information in the text file.
Currently the user written instructions, and then click send to myRIO running then all tasks, even if the USB is still attached. After the user sets the instuctions, when they click on the instructions for sending, a message should then say rather unplug the USB of myRIO (this could be set to 10 seconds or something), then the myRIO performs the tasks as a standalone application.
My project is the starter kit OR using the myRIO. I write instructions in the text file then the robot performs the tasks. The user never interfere with tasks, that the robot made, so the instructions are only sent once.
Please note that I have a face before poster, I don't know how these screens still work?
Thanks in advance for your help.
Hello
What you have said I think exactly as you want to do is not quite possible but you should be able to achieve the same thing by doing something like the following:
A start-up executable running on the myRIO would allow him to run separate to the computer. You could then open communication to the myRIO of a separate VI on the PC to send instructions, and then close the communication for you to unplug the myRIO
These links may help with some other reading on the executables to start on real-time targets:
http://zone.NI.com/reference/en-XX/help/370622N-01/lvrthowto/rt_building_rt_app/
http://digital.NI.com/public.nsf/allkb/E2F8C8D4270CCC62862574440054E894?OpenDocument
Best regards
-
Cannot use windows update after the new installation of xp sp2
Cannot use windows update after the new installation of xp sp2
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Maybe you are looking for
-
Open Google calendar using Firefox and found only the month of may display events. In the past, it displays dating back several years and moving forward about a year. Then, I got the following message ' Oops, we could not load your events, please try
-
Dead power supply HP Pavilion Slimline of s3750t
Dead bought a HP Paviliton Slimline s3750t in February - feeding six weeks later. No lights, no fan, nothing. Spent an hour in line with the HP chat support, who promised to send a replacement within 3-4 business days. Nothing happened, so now I'm on
-
Instability of the system cause ReadyBoost?
I tried readyboost on my vista 64-bit with a 4 GB usb key and it was great to work for a while, but one day, then my computer won't start, he said in my startup folder, files were missing or there was an error when you try to read them. After getting
-
Red lines on the bottom of the screen of the high tower
On my laptop (SONY VAIO VGN-CS33M) screen, the red lines are showing on screen, color lines are keep on changing anyone can advice me a solution.
-
Working Group has missed! How can I remove the invader computer?
I have a wireless home network connected through a Linksys wireless router. A Vista, a XP laptop. When my computer slowed last week I check the network and discovered another computer and multimedia device has been installed in my workgroup. I sea