Do independent myRIO after the user has defined guidelines

Similar Questions

• INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

  I want to allow the user to specify a curve like this:

  

  Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

  My design looks like this:

  

  With the error checking that looks like this:

  My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

  I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

  If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

  Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

  Spend more time thinking before coding usually pays Big dividends!

  (Speaking of sad experience) Bob Schor

• How to make a slide to wait until the user has answered a question correctly, even after activation of a smartshape?

  Background:

  I created a questionnaire in which the user must answer each question correctly before to proceed to the next slide. That's what I did:

  
  

  • Set preferences Settings > required > respond to everything - the user must answer each question to continue
  • Set the number of attempts at the level of the question to infinity
  • Made the Next invisible button and disabled the PlayBar

  In this way, the user can proceed to the next slide in the issue with the submission process - and, since attempts are endless, this means that after having answered the question correctly.

  Current objective:

  I want the user to be able to click on a prompt for a hint. To configure this, I did the following:

  • Created a smartshape titled 'click_for_hint' to display the text that says: "click here for a tip.
  • Created a smartshape labelled 'hint' text display
  • Show "hint" success value "click_for_hint".

  Now, when the user clicks on the text that says: "Click here for a hint," the suspicion appears. So it works - great! However, once the indicator is activated, I would like to for the user to continue endless attempts until respondent correctly to the question... and then only after answering correctly, proceed to the next slide.

  The problem:

  If the user has submitted one or more wrong answers, and then activates the indicator, the slide just waiting until the user has answered the question correctly. Instead, it will be set in playing, proceeding to the next slide. I tried the smartshape 'hint' to take a break on the success of adjustment, but it does not work.

  Is there a way to make the slide to wait until the answer to the question correctly before moving on to the next slide, even after the indicator has been activated?

  Are you aware that your required parameter can cause problems, the blocking of the user? It is also completely useless because you have unlimited attempts at the level of the issue and hid the next button (hope, you don't need review, otherwise, I would recommend not to hide this button but slide it under the Clear key: the Question slides in Captivate - Captivate blog)

  The index problem is related to the fact that a simple gesture going out of reading. I would like to see the timeline of the slide, to compare the points of suspension form and the question slide button. And maybe this blog can also clarify difference between simple/advanced: Why choose Standard Simple action?-Captivate blog

  Regarding the buttons on question slides form: buttons on slides of Question/Score of Captivate 6?-Captivate blog

• Windows Installer error only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  Trouble with trying to install an MSI Package. Receive the error message only by the installation of the machine is allow. It's when you try to run manually. When you try to run msiexec cmd

  msiexec /i "C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi" /qb/log "C:\install.log.

  = Recording started: 04/09/2013-10:36:27 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\windows\system32\msiexec.exe =.
  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:88) [10:36:27:107]: Resetting cached policy values
  MSI (c) (58:88) [10:36:27:107]: value of strategy Machine 'Debug' is 0
  MSI (c) (58:88) [10:36:27:107]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (c) (58:88) [10:36:27:107]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (58:88) [10:36:27:107]: grabbed execution mutex.
  MSI (c) (58:88) [10:36:27:147]: Cloaking enabled.
  MSI (c) (58:88) [10:36:27:147]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (58:88) [10:36:27:147]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:36:27:157]: running the installation inside the multi-package transaction Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi
  MSI (s) (C 54:4) [10:36:27:157]: grabbed execution mutex.
  MSI (s) (54:F8) [10:36:27:157]: Resetting cached policy values
  MSI (s) (54:F8) [10:36:27:157]: value of strategy Machine 'Debug' is 0
  MSI (s) (54:F8) [10:36:27:157]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (54:F8) [10:36:27:477]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:477]: "DisableMedia" user policy value is 0
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'AllowLockdownMedia' is 0
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media enabled only if the package is safe.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: looking for sourcelist for product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: added {C28136F7-F2C7-4426-B26F-F7E03922B34B}; for the potential sourcelist (pcode; disc; relpath) list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: check now product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media is enabled for the product.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: attempting to use LastUsedSource from source list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: source C:\windows\ccmcache\4\ by train.
  MSI (s) (54:F8) [10:36:27:787]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:27:787]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:27:787]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'DisableBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'AllowLockdownBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:27:787]: the LastUsedSource value: C:\windows\ccmcache\4\.
  MSI (s) (54:F8) [10:36:27:787]: value LastUsedType: n.
  MSI (s) (54:F8) [10:36:27:787]: A LastUsedIndex: 1.
  MSI (s) (54:F8) [10:36:27:787]: SOURCEMGMT: resolved source: 'C:\windows\ccmcache\4\ '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'LimitSystemRestoreCheckpointing' is 0
  MSI (s) (54:F8) [10:36:27:787]: Note: 1: 1715 2: Services for 32-bit Outlook Mimecast
  MSI (s) (54:F8) [10:36:27:787]: SRSetRestorePoint API call. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: «Installed it Services for Outlook 32-bit»
  MSI (s) (54:F8) [10:36:27:787]: the system restore service is disabled. Referred State: 1058. GetLastError() returned: 1058
  MSI (s) (54:F8) [10:36:28:117]: file will have the applied safety of OpCode.
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> ' C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi ' against the software restriction policy
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi has a digital signature
  MSI (s) (54:F8) [10:36:28:547]: STRATEGY of RESTRICTION SOFTWARE: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (54:F8) [10:36:28:547]: dialogue of end not activated
  MSI (s) (54:F8) [10:36:28:547]: ==> C:\windows\ccmcache\4\Mimecast4.0.msi original packaging
  MSI (s) (54:F8) [10:36:28:547]: we're running out of ==> C:\windows\Installer\14b48052.msi package
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: MSCOREE not loaded loading copy from system32
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: transformations are not secure.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is 'C:\install.log.
  MSI (s) (54:F8) [10:36:28:557]: command line: MSIINSTALLPERUSER = 3 CURRENTDIRECTORY = C: \ CLIENTUILEVEL = 2 CLIENTPROCESSID = 3672
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding PackageCode property. Its value is '{6C9809C5-9DBC-4683-AE5F-3E05D53939EA} '.
  MSI (s) (54:F8) [10:36:28:557]: Product Code spent in Engine.Initialize: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties before transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties after transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: unregistered product: first start installation
  MSI (s) (54:F8) [10:36:28:557]: has determined that the existing product (this product or the product being upgraded with a patch) is installed by user.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting ALLUSERS property. Its current value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding ProductState property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:28:557]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:28:557]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:28:557]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:28:557]: the Package name from the configuration data: "Mimecast4.0.msi."
  MSI (s) (54:F8) [10:36:28:557]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (54:F8) [10:36:28:557]: Machine policy value 'DisableMsi' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (54:F8) [10:36:28:557]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: the product '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' is running with elevated privileges: product is affected.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is "C:\". ».
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '2'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is '3672'.
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiRestartManagerSessionKey property. Its value is 'b9237eca8dffb44583db9105bf61f283 '.
  MSI (s) (54:F8) [10:36:28:567]: MANAGER of REBOOT: logon.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:567]: TRANSFORMS property is now:
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding PRODUCTLANGUAGE property. Its value is "1033".
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application data
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Favorites
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Documents
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\AppData\Local
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\Pictures
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Menu\Programs\Administrative of Directors Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application start\program Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\windows\Fonts
  MSI (s) (54:F8) [10:36:28:587]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (54:F8) [10:36:28:597]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding USERNAME property. Its value is "Oriel securities user".
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is "Oriel Securities Ltd.".
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\windows\Installer\14b48052.msi '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is 'C:\windows\ccmcache\4\Mimecast4.0.msi '.
  MSI (s) (54:F8) [10:36:28:597]: value of strategy Machine 'MsiDisableEmbeddedUI' is 0
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 2205 2:3: Package_correctif
  MSI (s) (54:F8) [10:36:28:597]: policy value 'DisableRollback' Machine is 0
  MSI (s) (54:F8) [10:36:28:597]: strategy user 'DisableRollback' is 0
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding UILevel property. Its value is '3'.
  = Logging started: 04/09/2013-10:36:28 =.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding ACTION property. Its value is 'INSTALL '.
  MSI (s) (54:F8) [10:36:28:597]: doing action: INSTALL
  Action start 10:36:28: INSTALL.
  MSI (s) (54:F8) [10:36:28:597]: ExecuteSequence running
  MSI (s) (54:F8) [10:36:28:597]: action driving: FindRelatedProducts
  Action start 10:36:28: FindRelatedProducts.
  MSI (s) (54:F8) [10:36:28:597]: action driving: AppSearch
  Action ended at 10:36:28: FindRelatedProducts. Returns the value 1.
  Action start 10:36:28: AppSearch.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding NETFRAMEWORK40FULL property. Its value is '#1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: action driving: OutlookVersionCheck
  Action ended at 10:36:28: AppSearch. Returns the value 1.
  MSI (s) (54:C8) [10:36:28:627]: call for a custom action to distance. DLL: C:\windows\Installer\MSI837D.tmp, point of entry: OutlookVersionCheck
  MSI (s) (54:B8) [10:36:28:627]: generation random cookie.
  MSI (s) (54:B8) [10:36:28:637]: created server custom with PID 4656 (0 x 1230) Action.
  MSI (s) (54:80) [10:36:28:667]: running as a service.
  MSI (s) (54:80) [10:36:28:667]: Hello, I am your 32-bit custom action Server Impersonated.
  Action start 10:36:28: OutlookVersionCheck.
  SFXCA: Extraction of a custom action to the temporary directory: C:\windows\Installer\MSI837D.tmp-\
  SFXCA: Link to the CLR version v4.0.30319
  Call to the custom action CustomAction_OutlookCheck! CustomAction_OutlookCheck.CustomActions.OutlookVersionCheck
  BEGIN OutlookVersionCheck
  OUTLOOK BITNESS IS: x 86
  Key checking: Software\Microsoft\Office\11.0\Outlook
  Key checking: Software\Wow6432Node\Microsoft\Office\11.0\Outlook
  Key checking: Software\Microsoft\Office\12.0\Outlook\InstallRoot
  Key checking: Software\Wow6432Node\Microsoft\Office\12.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: adding OUTLOOK_INSTALLED property. Its value is 'TRUE '.
  Key checking: Software\Microsoft\Office\14.0\Outlook\InstallRoot
  Found version: Outlook 2010
  Key checking: Software\Wow6432Node\Microsoft\Office\14.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: property to change OUTLOOK_VERSION. Its current value is 'NONE '. Its new value: "Outlook 2010".
  Found version: Outlook 2010
  OUTLOOK_INSTALLED is: TRUE
  IS THE VERSION of OUTLOOK: Outlook 2010
  MSI (s) (54:F8) [10:36:28:830]: action driving: LaunchConditions
  Action ended at 10:36:28: OutlookVersionCheck. Returns the value 1.
  Action start 10:36:28: LaunchConditions.
  MSI (s) (54:F8) [10:38:26:502]: product: service Mimecast for 32-bit Outlook - only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  MSI (c) (58:C0) [10:36:28:850]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  Installation is allowed only by the machine. Please make sure that the user has the appropriate rights to do so.
  Action ended at 10:38:26: LaunchConditions. Return value 3.
  Action ended at 10:38:26: INSTALL. Return value 3.
  Property (S): UpgradeCode = {586A589B-D6D5-48D3-9B6D-571EF230ED6A}
  Property (S): NETFRAMEWORK40FULL = 1 #.
  Property (S): LAUNCHOUTLOOKONEXIT = 1
  Property (S): WIXUI_INSTALLDIR = INSTALLDIR
  Property (S): OutlookOpen = false
  Property (S): ProgramFilesFolder = C:\Program Files (x 86).
  Property (S): VersionNT = 601
  Property (S): Manufacturer = Mimecast Ltd
  Property (S): ProductCode = {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  Property (S): ProductLanguage = 1033
  Property (S): ProductName = Mimecast Services for 32-bit Outlook
  Property (S): ProductVersion = 4.0.348.5166
  Property (S): ARPPRODUCTICON = MainIcon.exe
  Property (S): ARPHELPLINK = * address email is removed from the privacy *
  Property (S): ARPNOMODIFY = 0
  Property (S): Platform = *.
  Property (S): ROOTDRIVE = C:\\
  Property (S): MsiBitness = x 86
  Property (S): MimecastInstaller = *.
  Property (S): CAP_Common = *.
  Property (S): CAP_Common.Options = *.
  Property (S): CAP_Common.Options.Credentials = *.
  Property (S): CAP_Common.Options.ChangePassword = *.
  Property (S): CAP_Common.Options.Network = *.
  Property (S): CAP_Common.Options.Network.Read = *.
  Property (S): CAP_Common.Options.Network.Update = *.
  Property (S): CAP_Common.Options.Capabilities = *.
  Property (S): CAP_Common.Update.Manual = *.
  Property (S): CAP_Archive = *.
  Property (S): CAP_Archive.Search = *.
  Property (S): CAP_Archive.Search.Quick = *.
  Property (S): CAP_Archive.Search.Basic = *.
  Property (S): CAP_Archive.Search.Builder = *.
  Property (S): CAP_Archive.Search.Context = *.
  Property (S): CAP_Archive.Search.Recent = *.
  Property (S): CAP_Archive.Search.Favourite = *.
  Property (S): CAP_Archive.Search.Manage = *.
  Property (S): CAP_Gateway = *.
  Property (S): CAP_Gateway.Block = *.
  Property (S): CAP_Gateway.Block.Address = *.
  Property (S): CAP_Gateway.Block.Domain = *.
  Property (S): CAP_Gateway.Block.ReportSpam = *.
  Property (S): CAP_Gateway.Block.ManagedSenders = *.
  Property (S): CAP_Gateway.OnHoldItems = *.
  Property (S): CAP_Gateway.OnHoldItems.Personal = *.
  Property (S): CAP_Gateway.OnHoldItems.Moderated = *.
  Property (S): CAP_Gateway.OnHoldItems.Release = *.
  Property (S): CAP_Gateway.OnHoldItems.Block = *.
  Property (S): CAP_Gateway.Track = *.
  Property (S): CAP_Gateway.Transport = *.
  Property (S): CAP_Gateway.Transport.Secure = *.
  Property (S): CAP_Gateway.Transport.CCM = *.
  Property (S): CAP_Gateway.Transport.Stationery = *.
  Property (S): CAP_Gateway.Transport.Stationery.None = *.
  Property (S): CAP_Gateway.Transport.Stationery.Select = *.
  Property (S): CAP_Gateway.Transport.Attachments = *.
  Property (S): CAP_Gateway.Transport.Attachments.Convert = *.
  Property (S): CAP_Gateway.Transport.Attachments.Metadata = *.
  Property (S): CAP_Gateway.Transport.Attachments.StripLink = *.
  Property (S): CAP_Continuity = *.
  Property (S): CAP_Continuity.Mailbox = *.
  Property (S): CAP_Continuity.Mailbox.ReceivedItems = *.
  Property (S): CAP_Continuity.Mailbox.SentItems = *.
  Property (S): CAP_Continuity.Monitor = *.
  Property (S): CAP_Continuity.Monitor.Auto = *.
  Property (S): CAP_Continuity.Monitor.User = *.
  Property (S): CAP_Continuity.Monitor.Admin = *.
  Property (S): CAP_Continuity.Enable = *.
  Property (S): CAP_Continuity.Enable.Auto = *.
  Property (S): CAP_Continuity.Enable.Admin = *.
  Property (S): CAP_Piits = *.
  Property (S): CAP_Piits.Management = *.
  Property (S): CAP_Piits.AutoMount = *.
  Property (S): Global.Service.AccountType = *.
  Property (S): Global.Service.Username = *.
  Property (S): Global.Service.Password = *.
  Property (S): Global.WebProxy.Enable = *.
  Property (S): Global.WebProxy.Type = *.
  Property (S): Global.WebProxy.URL = *.
  Property (S): Global.WebProxy.Username = *.
  Property (S): Global.WebProxy.Password = *.
  Property (S): Global.Settings.IgnoreLocal = *.
  Property (S): Global.AutoUpdate.URL = *.
  Property (S): Global.AutoUpdate.Enable = *.
  Property (S): Global.Logging.LogDirectory = *.
  Property (S): Global.Logging.MaxFileSize = *.
  Property (S): Global.Service.MaxRolls = *.
  Property (S): Global.Logging.Level = *.
  Property (S): Session.Pits.FolderSyncInterval = *.
  Property (S): Global.Piits.MaxMessagesPerFolder = *.
  Property (S): Global.Service.InstallDirectory = *.
  Property (S): Global.Service.DataCacheSize = *.
  Property (S): Session.Continuity.PreDupeDuration = *.
  Property (S): Session.Continuity.PostDupeDuration = *.
  Property (S): Session.Continuity.HardFrequency = *.
  Property (S): Session.Continuity.SoftDuration = *.
  Property (S): Session.Continuity.EndContinuityExchangeAvailable = *.
  Property (S): Session.Continuity.EndContinuityMimecastUnavailable = *.
  Property (S): Global.Feedback.Recipients = *.
  Property (S): DefaultUIFont = *.
  Property (S): MSIRESTARTMANAGERCONTROL = DisableShutdown
  Property (S): REBOOT = ReallySuppress
  Property (S): OUTLOOK_VERSION = Outlook 2010
  Property (S): OUTLOOK_BITNESS = x 86
  Property (S): ErrorDialog = ErrorDlg
  Property (S): SERVICE_DIR = Windows Service Mimecast
  Property (S): SecureCustomProperties = NETFRAMEWORK40FULL; NEWERPRODUCTFOUND; OLDAPPFOUND; PREVIOUSVERSIONSINSTALLED; WIX_DOWNGRADE_DETECTED; WIX_UPGRADE_DETECTED
  Property (S): MsiHiddenProperties = _LicenseAgreed; CAP_Archive; CAP_Archive.search; CAP_Archive.search.Basic; CAP_Archive.search.Builder; CAP_Archive.search.context; CAP_Archive.search.favourite; CAP_Archive.search.manage; CAP_Archive.search.quick; CAP_Archive.search.recent; CAP_Common; CAP_Common.options; CAP_Common.options.capabilities; CAP_Common.options.ChangePassword; CAP_Common.options.credentials; CAP_Common.options.network; CAP_Common.options.network.read; CAP_Common.options.network.Update; CAP_Common.update.manual; CAP_Continuity; CAP_Continuity.enable; CAP_Continuity.enable.admin; CAP_Continuity.enable.Auto; CAP_Continuity.mailbox; CAP_Continuity.mailbox.ReceivedItems; CAP_Continuity.mailbox.SentItems; CAP_Continuity.monitor; CAP_Continuity.monitor.admin; CAP_Continuity.monitor.Auto; CAP_Continuity.monitor.user; CAP_Gateway; CAP_Gateway.block; CAP_Gateway.block.address; CAP_Gateway.block.domain; CAP_Gateway.block.ManagedSenders; CAP_Gateway.block.ReportSpam; CAP_Gateway.OnHoldItems; CAP_Gateway.OnHoldItems.block; CAP_Gateway.OnHoldItems.moderated; CAP_Gateway.OnHoldItems.personal; CAP_Gateway.OnHoldItems.release; CAP_Gateway.track; CAP_Gateway.transport; CAP_Gateway.transport.attachments; CAP_Gateway.transport.attachments.convert; CAP_Gateway.transport.attachments.metadata; CAP_Gateway.transport.attachments.StripLink; CAP_Gateway.transport.CCM; CAP_Gateway.transport.secure; CAP_Gateway.transport.stationery; CAP_Gateway.transport.stationery.None; CAP_Gateway.transport.stationery.Select; CAP_Piits; CAP_Piits.automount; CAP_Piits.Management; DefaultUIFont; Global.AutoUpdate.Enable; Global.AutoUpdate.URL; Global.Feedback.Recipients; Global.Logging.Level; Global.Logging.LogDirectory; Global.Logging.MaxFileSize; Global.Piits.MaxMessagesPerFolder; Global.Service.AccountType; Global.Service.DataCacheSize; Global.Service.InstallDirectory; Global.Service.MaxRolls; Global.Service.Password; Global.Service.Username; Global.Settings.IgnoreLocal; Global.WebProxy.Enable; Global.WebProxy.Password; Global.WebProxy.Type; Global.WebProxy.URL; Global.WebProxy.Username; MimecastInstaller; PLATFORM; Session.Continuity.EndContinuityExchangeAvailable; Session.Continuity.EndContinuityMimecastUnavailable; Session.Continuity.HardFrequency; Session.Continuity.PostDupeDuration; Session.Continuity.PreDupeDuration; Session.Continuity.SoftDuration; Session.Pits.FolderSyncInterval
  Property (S): MsiLogFileLocation = C:\install.log
  Property (S): PackageCode = {6C9809C5-9DBC-4683-AE5F-3E05D53939EA}
  Property (S): ProductState = 1
  Property (S): PRODUCTLANGUAGE = 1033
  Property (S): CURRENTDIRECTORY = C:\
  Property (S): CLIENTUILEVEL = 2
  Property (S): CLIENTPROCESSID = 3672
  Property (S): MsiRestartManagerSessionKey = b9237eca8dffb44583db9105bf61f283
  Property (S): VersionDatabase = 200
  Property (S): MsiSystemRebootPending = 1
  Property (S): VersionMsi = 5.00
  Property (S): VersionNT64 = 601
  Property (S): WindowsBuild = 7601
  Property (S): ServicePackLevel = 1
  Property (S): ServicePackLevelMinor = 0
  Property (S): MsiNTProductType = 1
  Property (S): WindowsFolder = C:\windows\
  Property (S): WindowsVolume = C:\
  Property (S): System64Folder = C:\windows\system32\
  Property (S): SystemFolder = C:\windows\SysWOW64\
  Property (S): RemoteAdminTS = 1
  Property (S): TempFolder = C:\Users\TECH~1.SUP\AppData\Local\Temp\
  Property (S): CommonFilesFolder directory = C:\Program Files (x 86) \Common Files\
  Property (S): ProgramFiles64Folder = C:\Program Files\
  Property (S): CommonFiles64Folder = C:\Program Files\ Files\Fichiers
  Property (S): AppDataFolder = \\gblon-v-fp001\users$\tech.support\Application Data\
  Property (S): FavoritesFolder = \\gblon-v-fp001\users$\tech.support\Favorites\
  Property (S): NetHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network Shortcuts\
  Property (S): PersonalFolder = \\gblon-v-fp001\users$\tech.support\Documents\
  Property (S): PrintHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer Shortcuts\
  Property (S): RecentFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent\
  Property (S): SendToFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo\
  Property (S): TemplateFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates\
  Property (S): CommonAppDataFolder = C:\ProgramData\
  Property (S): LocalAppDataFolder = C:\Users\tech.support\AppData\Local\
  Property (S): MyPicturesFolder = C:\Users\tech.support\Pictures\
  Property (S): AdminToolsFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start administration Tools\
  Property (S): StartupFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start demarrer\programmes\demarrage\
  Property (S): ProgramMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\
  Property (S): StartMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\
  Property (S): DesktopFolder = \\gblon-v-fp001\users$\tech.support\Desktop\
  Property (S): Font = C:\windows\Fonts\
  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 4027
  Property (S): VirtualMemory = 5339
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = tech.support
  Property (S): UserSID = S-1-5-21-583907252-2049760794-725345543-5685
  Property (S): UserLanguageID = 2057
  Property (S): ComputerName = OSLLONPC052
  Property (S): SystemLanguageID = 2057
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 22
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 10:38:26
  Property (S): Date = 04/09/2013
  Property (S): MsiNetAssemblySupport = 4.0.30319.1
  Property (S): MsiWin32AssemblySupport = 6.1.7601.17514
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = Oriel securities user
  Property (S): COMPANYNAME = Oriel Securities Ltd.
  Property (S): basis of DATA = C:\windows\Installer\14b48052.msi
  Property (S): OriginalDatabase = C:\windows\ccmcache\4\Mimecast4.0.msi
  Property (S): UILevel = 3
  Property (S): ACTION = INSTALL
  Property (S): OUTLOOK_INSTALLED = TRUE
  MSI (s) (54:F8) [10:38:26:532]: see clean files/packages, if there
  MSI (s) (54:F8) [10:38:26:532]: MainEngineThread returned 1603
  MSI (s) (C 54:4) [10:38:26:542]: RESTART MANAGER: closed Session.
  MSI (s) (C 54:4) [10:38:26:542]: sequence number number for this installation system restore.
  = Logging stopped: 04/09/2013-10:38:26 =.
  MSI (s) (C 54:4) [10:38:26:542]: strategy user 'DisableRollback' is 0
  MSI (s) (C 54:4) [10:38:26:542]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C 54:4) [10:38:26:542]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C 54:4) [10:38:26:542]: restoration of the environment variables
  MSI (s) (C 54:4) [10:38:26:542]: object to destroy RemoteAPI.
  MSI (s) (54:B8) [10:38:26:542]: end of thread Custom Action Manager.
  MSI (c) (58:88) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (58:88) [10:38:26:542]: MainEngineThread returned 1603
  = Recording stopped: 04/09/2013-10:38:26 =.

  Appreciate that any direction. Seems that maybe the MSI package might have broken this machine

  Hi Dan,

  This computer is on a domain network?

  I suggest that post you the question in Mimecast forums for more information support:

  Support community-powered Mimecast

  https://community.Mimecast.com/Mimecast

  Hope this information helps.

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• Really? Once again? "The user has sufficient privileges to install Adobe Flash Player"

  My browser is firefox.

  "The user has sufficient privileges to install Adobe Flash Player" is the incessant problem, I had several times the Flash update.

  Come on guys, it's beyond ridiculous. Installation always stops in 55% exactly and is never completed, leaving me to give up Firefox for Chrome. I mucked on the last, half a dozen times this has happened during the update and just by pure chance she managed to install, but it has been 2 hours mucking similar and I'm now getting nowhere.

  This has been a persistent problem and affected many users of firefox for years, as I saw it by my own experience and google search. Is there a way you all can provide a SIMPLIFIED solution to this question, in coordination with firefox or by providing a 'unique' Firefox Installer? Really it's too annoying.

  In any case, before anyone asks, yes I am logged in as administrator, and Yes, I ran the Installer "as admin" by right-clicking. I also went ahead and completely uninstalled flash (and emptied such records as requested in other threads here) and reinstalled it, only to watch the progress bar to put an end to 55%, as usual and let me by clicking on this icon of Chrome stupid to have a programme of work for flash.

  Honestly people, why, after years, it continue to be a persistent problem? Fix it for the love of God! Are you a lot guys make the ObamaCare website or what? Firefox people are loyal to our browser, and the installation of new versions of flash on this browser is a bloody useless pain in the you know what.

  Sorry for the frustration visible, but if someone could please provide a solution, I wouldn't need to be to complain here universal work and moaning.

  Try a new installation as described in http://forums.adobe.com/thread/928315

  Regarding the installation programs use these installers in offline mode:

  Flash Player ActiveX (Internet Explorer)

  Flash Player plug-in (all other browsers)

  If you still experience problems during installation, please send the contents of the FlashInstall.log file

  C:\WINDOWS\system32\Macromed\Flash and

  C:\Windows\syswow64\Macromed\Flash

• The button should only VISIBLE if the user has entered all of the required fields?

  Hello

  I have 10 fields in the form, 3 are required/mandatory fields to enter the data. And I also kept a button with caption CHECK THE FIELDS.

  I also kept a 2nd button, say legend is GOOD TO GO (this isn't a SUBMIT button, the two buttons are normalbuttons)

  At the point of HRT, GOOD TO GO button is "hidden"

  Now, say, user forgot to enter the 2 required fields and you press the button CHECK THE FIELDS, guest user 2 times with popup legends field of respect.

  Now user entered in 1 field and forgotten again to enter the data in another area and pressed the button CHECK FIELDS, guest user 1 time with a popup with the caption for field of respect.

  Now, the user entered in this field too, very well and CHECK THE FIELDS button, the user has NOT prompted with a popup.

  BUT at this POINT, I need to see THE/PRESENCE button GOOD TO GO

  Please let me know how can they do it in JavaScript?

  Thank you

  You were absent; After each statement - no need after 'else '. Don't know what you're doing with b? B get used somewhere? Also, I think I've fixed your resolveNode syntax. Give it a try.

  for (var i = 0; i)< myarray.length;="" i++)="">
  If (xfa.resolveNode("VISITORINFO["_+_i_+"]").rawValue == null) {}
  b = xfa.resolveNode ("VISITORINFO [" + i + "]"). caption.value.text.value;
  x = "BAD";

  App.Alert (x);
  }
  on the other
  {
  If (x! = 'BAD') {}
  x = "GOOD";
  App.Alert (x);
  }
  }

  }

  Good luck!

  Stephen

• How to determine that the user has purchased an article or not?

  Hello

  Can someone tell me how can I determine if the user has purchased an article or not?

  Until now, I add to the cart and then allow user to pay for this item through Paypal. But now, my goal is to show all these items that the user has already added, but not bought yet.so, whenever user logs in a/c, he can see the item in my cart.

  Please... help me

  This sounds like a question of PayPal, then you will want to check these forums. If you were using in-app purchases of BB, so yes, it has an API to check the previous in-app purchases.

• which detects that the user has changed the clock of the device?

  Hi all my application dependent on the clock time in the device settings. who can my application to detect if the user has replaced the unit time? Thank you

  Salvation;

  It's the Question2:

  and I found the solution:

  bps_initialize();
  Subscribe (clock_get_domain ());
  clock_request_events (0);

  void ApplicationUI::event(bps_event_t *event) {}
  unsigned int dcode = bps_event_get_domain (event);
  If (dcode is {clock_get_domain()})
  unsigned int code = bps_event_get_code (event);
  if(code == CLOCK_INFO) {}
  Q_EMIT dateorclockuserChanged(); signal function qml
  }

  }
  }

  Thanks a lot for your help

• Design requirement has evolved, savings where the user has navigated to.

  Continuing this thread: http://supportforums.blackberry.com/t5/Java-Development/Confirming-a-design-where-I-need-to-save-whe...

  Requirements have changed.

  I now need to save the position on the screen where the user has navigated to once the screen has been redesigned.

  Specific screens are relayed on and painted according to a TimerTask. Once the screen again, I must automatically reposition / scroll to the position that the user was on the screen.

  For example:

  1. A user can leave a screen open for ten seconds.
  2. A user scrolls down to 3/4 of the way down.
  3. Once this time is up, a TimerTask is executed and redraws the screen with new data.
  4. If the user did scroll down in a VerticalFieldManager 3/4 of the way down, once the screen is redrawn the user must be back to the same position - 3/4 of the way down in the VerticalFieldManager.

  Ideally, I would like to save the XYPoint and then reposition the screen for the XYPoint recorded - a small prototype needs to be done for my part, granted.

  However, is there a better design or any who has implemented this feature before on OS 5.0.0?

  Thank you.

  I did so with a Manager (s) personalized using the recursively offset of vertical scroll through the stack of Manager as suggested by Peter, but be aware that you must not only parchment of, but the position is within the screen/Manager to follow the actual position of the screen against the perceived one. Here is the code that I use in my manager with my custom functions:

  public final int getAbsoluteY(){
     int absY = (getY()+drawY);
     while( getManager() instanceof CustomLayoutManager ){
        return absY + ((CustomLayoutManager)getManager()).getAbsoluteY();
     }
     return absY;
  }
  

• ODI is not able to detect the primary/foreign keys to XML - the user has no privilege or object not found

  Hi guys,.

  Im trying to load an XML with the address of two entities and employee as below. The topology of reverse engineering, everything works well. Even able to display the xml data in ODI, but when I try to load the data of these two entities join by the schema of the primary keys and foreign keys which created odi engineering process reverses for xml, im im getting the error below.  IM able to load an entity data, error occurs only when I use the join odi creates internally to identify employees for xml and address components

  XML file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < EMP >

  < Empsch >

  < employee >

  < EmployeeID 12345 > < / EmployeeID >

  < original > t < / initials >

  John < name > < / LastName >

  DOE < FirstName > < / name >

  < / employee >

  < address >

  < > 12345 as WorkPhone < / as WorkPhone >

  < WorkAddress > test 234 < / WorkAddress >

  < / address >

  < / Empsch >

  < / EMP >

  Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml & s = Empsch & re = EMP & dod = true & nobu = false

  Error message:

  -5501: 42501: java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.jdbc.Util.sqlException (unknown Source)

  for org.hsqldb.jdbc.JDBCPreparedStatement. < init >(Unknown Source)

  at org.hsqldb.jdbc.JDBCConnection.prepareStatement (unknown Source)

  at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)

  at sun.reflect.GeneratedMethodAccessor65.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$ OnDisconnectCommandExecutionHandler.invoke (OnConnectOnDisconnectDataSourceAdapter.java:200)

  to $Proxy2.prepareStatement (Unknown Source)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)

  at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: org.hsqldb.HsqlException: the user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.error.Error.error (unknown Source)

  at org.hsqldb.ExpressionColumn.checkColumnsResolved (unknown Source)

  at org.hsqldb.QueryExpression.resolve (unknown Source)

  at org.hsqldb.ParserDQL.compileCursorSpecification (unknown Source)

  at org.hsqldb.ParserCommand.compilePart (unknown Source)

  at org.hsqldb.ParserCommand.compileStatement (unknown Source)

  at org.hsqldb.Session.compileStatement (unknown Source)

  at org.hsqldb.StatementManager.compile (unknown Source)

  at org.hsqldb.Session.execute (unknown Source)

  ... more than 27

  Please advice

  Thank you

  Fabien

  It is clear from the content of the xml file, you have given here. In this xml file, you have four type of complex. Two of them are employed and address. However the employee doesnot has nothing to do with the address that you have not added the relationship. That is why its failure. This isn't the fault of the ODI.

  Also I suggest not to use self-generated by ODI dtd that you might face problem in the future. For example, the address of XML type has 8 attributes, and 4 of them are not mandatory. This means that each of your xml file may have attributes between 4 and 8.  That's where ODI auto generated DTD fails.

  ComplexType element XML schema

  Thank you

  Chantal

• Check if the user has selected box element apex before the loading of the page

  4.2.1

  THM:2

  Hello world

  I have two classic reports with different conditions but even select the columns based on a sql that uses the apex_item.checkbox2 element that allows users to select the lines and run some process. I also have a radio unit that hides and shows these two reports. However, it is possible that the user select a few lines and without doing anything click on the radio button that will present the page and all the lines that earlier he had chosen will be lost. I want that we should be able to pop an alert if there are checkboxes checked and the user tried to hit the button of the radio looks like the APEX_APPLICATION. G_F01. Count is not available at the time the page is submitted. We thought to use a pl/sql to see if APEX_APPLICATION DA. G_F01. Count > 0 then trigger an alert to confirm.

  Any ideas on how to do this?

  Thank you

  ryansun wrote:

  Hi FAC586 - basically, there are two parts of the report, were grouped products consolidated (as master) and the other report has all the products of the child. So based on the option the user selects that he sees who discovers and processes information.

  I tried to create the DA, but he does not seem to fire and I'm sure it would be because I have something wrong.

  No, in this case, there was a typing error in my JS expression above (this is what happens when there is no example in the trial against...)

  Must be:$('td[headers="COL_ALIAS"] input:checked').length > 0

  I have page submit on the evolution of radio, given that other elements of the actual application, don't do with this feature which is filled on the loading of the page.

  It does not work. If the present radio on the presentation changes group cannot be controlled by the dynamic action to confirm that it has already been committed before the confirmation message is displayed. Presentation must be made by further action of real on the DA. By the way other values is possible by using dynamic actions or region to submit elements of Page properties.

  But here it is necessary, if the user has activated all the lines, then changes the selection of the radio, it should show an alert to confirm. In addition, what happens if we have a very select in the box by a header label already. Can I use the same label to identify the COL_ALIAS?

  Do not understand the question.

  Don't know what I'm doing wrong.

  As I noted above, an important part of your problem is that you asking what amounts to a series of questions XY rather than the big picture given by presenting the necessary resources. You have been really good on the creation of examples on apex.oracle.com, but they are all fragments of the righteous, which makes things difficult when you try their synthesis in something that works as a coherent whole. Various bits and pieces that have been revealed in recent weeks, it seems like this could be treated using dynamic measurements without having to send the page until the final choice has been made.

• the API call error: error: the user has sufficient privileges to perform this API call.

  Hello

  I'm exploring cloudClient 3.4.1 but I'm trying to run a "vra catalog list" command or other similar commands I get the error "error: the user has sufficient privileges to perform this API call."

  I don't know what are the permissions of system requirements before I can make the API call because the account which I use to make these calls already have privileges to Administrator local on box of IAAS & is admin Admin/tenant IAAS. In short, the user is a full administrator of the tool.

  Please help me because I found there is a documentation for the usability of the cloudclient.

  Thank you

  MG

  Is the account of your help to make the law of all items in the catalog API call? We have users from the normal group of activities that use the API does not have system or administrator access.

• How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  Hi all

  How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  There is also a checkbox on the dialog box 'Sign' to lock document after signing.

• I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  Anyone had this same problem? I'm doing something wrong?

  Hi Jesse,.

  Please follow did not receive expected Adobe email

  I hope this helps!

  Kind regards

  Sheena