Cannot create a new instance of the app after deleting older once

Similar Questions

• Cannot create a new instance in Hyperion Conf Utility

  Hello
  I installed 9.3.1 on XP Prof. planning everything is configured correctly, with the exception of the instance. I'm trying to create a new instance and system gives the following-
  "System failure: Error retrieving the xml database.
  
  I have re-installed and configured planning triple check that the error is not on the side of the installation.
  Guru, please provide your ideas on this. If the instance is created, I can start working on applications...
  
  Thanks for your time,
  Varma.

  Hello

  It should not question it is null, because an instance has not been created yet, although she always does try and access the table to see if there is something in the xml_field, the problem seems to be to try to access to this.

  Is it possible, you can raise through the planning on the windows 2003 installation configuration, one step at a time in the following order.

  Unregister the SSP.

  Product options

  Register with Shared Services

  Configure the database (when prompted, choose Remove all tables and create a new database)

  Deploy to the application server

  Instance of product registration

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• "The instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. "when I go to create a new pdf of the file after the installation of updates

  Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »

  HELP - I can't find a solution.

  Thank you!!

  Hello

  1. what program you use for your design project?

  2. did you run the repair of this program?

  Perform System Restore on the computer and check if that helps.

• Launch BTF in a new window via URL - always creates a new instance of the AOS?

  Hello

  JDeveloper/ADF 11.1.2.4

  I use the method documented by Frank Nimphius to open a workflow bounded in a new window. The difference in my case is rather than a range of remote data control, I want the new window to share the same instance of module app launch window.

  My BTF has Transaction < controller Transaction No. > the value and scope of data control is a shared value.

  When I run the first page (in the unlimited workflow), a new instance of AOS is created as expected.

  When I click on the button to launch the window with the stubborn workflow, another instance of AOS is created.

  The problem is that in the request module original I stored some status information in the user session data (and I coded the passivation/activate process to handle this). Unfortunately, the second instance of AOS has no access to these data. User session data is empty and no activation process is triggered to complete.

  I can use the Andrejus Baranovskis method to inject the session data in the new instance AM using a custom control of Data Factory, but it seems unnecessary to instantiate the second AM when the first could be reused.

  Is it possible I can configure the system to share the app between two windows module? If you start a BTF via a URL will be always instantiate a new App Module, regardless of the settings of transaction?

  Thank you very much

  Kevin

  Hello

  I connected an SR for this and the answer is that this is normal. A new window will always cause a new instance of AOS to create.

  See you soon,.

  Kevin

• Cannot create a new folder in the Explorer of Windows 7

  Somehow, I lost the ability to create new folders in the Explorer of Windows 7.  Explorer opens and the button "New folder" is always at the top, but when you click it nothing happens.  Also, when I right click in a directory I don't have the ability to create a new folder.  What happened and how this can be fixed?

  You have installed chrome? It's looking like a recent update of chromium may be the cause. Here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• Cannot create a new folder using the link on command bar (Win 7) over problem of saving files newly downloaded into the folder of choice

  Greetings! And thanks for your visit. I was not a happy camper since my toys have acted toward the top. And eating too much of my time, with too few results. Here we go:

  • I'm unable to create a new folder or get No response after clicking on "new folder" on the command bar in Windows 7 (Professional).

  Nothing happening... not even an error message.  I can enter the existing folders (where individual files) but as I'm trying to create a new folder to put them in, I write off. But that's not all. There is another mystery plaguing my system (and I suspect that these two are related).  I am naïve about how to remedy the situation:

  • I can not save files to my desktop (x) - favorite mainly files I just downloaded and am trying to save;

  I get an error message indicating "you don't have permission to save to this place... you want to save it to My Documents instead? (No, I wouldn't.)  I'm connected with my regular user profile (which has administrator privileges). Yes... I checked in the user accounts and verified. (I am the only user on the system, in case this has an impact on the problem. Not sure if I should create a "dummy" another user without administrator privileges, but just throw that out there.) This seems to be mainly when I am trying to save a downloaded file or the executable file.

  I can if not create and/or move files without problem; It's just not very welcoming for new downloads.

  Between these two issues, I'm not having fun with this all-in-One Dell Optiplex (new).  She is on a home network and the only thing I have

  reminder to do recently is to join the homegroup with one of the other Win 7 PC on the same network. Maybe this related to not having 'permission' to save in some places? Or create new folders? I'm the kind of feeling sad and rejected...

  Any ideas or suggestions would be appreciated. FYI: I try not to visit the registry on my own I do not have a Guide of techno-GPS with me. I sailed quite well on my own otherwise, provided that I the registry (or any what presses along the way.) Please think about this and do the right thing. I'll wait here with my turn signals on.
  Ciao

  Hello

  You have discovered a problem with Windows 7. To resolve this problem, I use a program called FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Cannot create a new folder. The records appear to be locked. I am registered as an administrator. Not sure how long this has been the case.

  Maybe some comments uninvited made a change, but if that's the case I don't know how to fix it.

  Hello Don,

  You have discovered a problem with Windows 7. To resolve this problem, I recommend a program called FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette

• A new instance of the section of the table

  I have two rows in the table (lines 2 and 3) together to form a section. When I use the following script, LiveCycle creates a new instance of the line 3 instead of creating a new instance of the section (two row 2 and 3). What I am doing wrong? (The section is named ' ActionItem1 in Table1)

  this.resolveNode('Table1._ActionItem1').addInstance (1);

  If (xfa.host.version < 8) {}

  XFA. Form.Recalculate (1);

  }

  You should be able to recreate what you do with subforms, tables is just specialized subforms. Create subforms for your headers, lines, etc. I built a few tables in this way.

• Add a new instance to the NON-RAC database?

  I could create a new instance to the non-rac database?
  
  I tried to use dbca to create the second instance, but I read, help, that is not possible.
  
  There is no way to create the second instance in a single database? (No. - CARS, no. - ASM, just a normal database)
  
  Thanks in advance.

  Instance = process and memory
  Basis of data = all data files.

  For a database no CARS, there is a one-to-one mapping between the instance and database.

  If you don't want to use an existing database to store the new patterns, you need to create a new database.

• Create a new instance based on a string

  Hi all

  I have to add some movieclips dynamically to the scene. I have stockings fall on the scene who will control what is added. The value of each selection is the name of each movieclip. How can I take this and create a new instance of the clip right?

  I know that this code does not work but it needs to illustrate what I'm doing.

  var myclip:MovieClip = new dropdown1.value;

  I did some research, but so far have not had much luck. I found getChildByName, but it sounds like it just is something already on the scene.

  also, is there a way I can cite the instance dynamically so? for example, lets say I wind up adding 10 movieclips can I dynamically name myClip1, myClip2, myClip3... myClip10 - I thought I found an answer for this part by:

  var this [dropdown.text + '1']: MovieClip = new MovieClip(); but which generates an error.

  Thank you

  This is the function that I use to create new movieclip

  public static void CreateNewMovieClipByName(aStrMovieClipName:String):void

  {

  var classMovieClip: Class = ApplicationDomain.currentDomain.getDefinition (aStrMovieClipName) in class;
  return new classMovieClip();

  }

  You must ensure that the links and properties are set correctly, otherwise you won't be able to find the definition. Make sure that the correct flash files are imported.

• Cannot create a new folder, right-click and the option is not there

  Cannot create a new folder, right-click and the option is not there

  Hi Walt,.

  Please follow the procedure described here: http://www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  I hope this helps.

  See you soon
  Julia

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Another: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183 but on XP Pro

  I am changing a laptop Windows XP Pro using the converter software 4.0.1.

  He will start the conversion process, but after 10 seconds or so, I get the error: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183

  The strange thing is my images of box Vista successfully without problem.

  I'm in a corporate environment. I moved the laptop test I try the image of an OU restrictive and placed in a non-restrictive ORGANIZATIONAL unit (without firewalls and others). I always have the same question.

  I made sure all the VSS services and these are running and active. I even tried MS KB Article 941956 comes to do even if it said it was only for Server 2003.

  Any other pointers on this? It seems that a lot of people get this error, but the only ones I can find are for server operating systems... not XP.

  In the event under application Viewer I have errors of:

  Type: error

  Event ID: 12292

  The volume shadow copy Service error. Error creating the Shadow Copy Provider COM with CLSID {65ee1dba-8ffa-4a58-ac1c-3470ee2f376a} class

  Type: WARNING

  Event ID: 4356

  {The COM system + impossible to create an instance of the Subscriber partition:{41e90f3e-56c1-4633-81c3-6e8bac8bdd70}!new:{d3938ab0-5b9d-11d1-8dd2-00aa004abd5e}. CoGetObject returned HRESULT 80070005

  Type: WARNING

  Event ID: 4353

  The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code. HRESULT was80040201

  Type: error

  Event ID: 8193

  Volume Shadow Copy Service Error: Unexpected error calling routine CoCreateInstance. HR = 0 x 80004002

  You are able to start these three services; EventSystem, swprv, vss?

  What is this command returns; "vssadmin list writers"?

  Joakim