Fluke 6100 driver error
I have a quesiton about the fluke 6100 driver. The first time I run my program, the initialization of the pilot will give me an error, but if I run the program again, the error will disappear. Why is this?
Yik
Hi Yik,
The details on this error, see the following knowledge base article.
http://digital.NI.com/public.nsf/allkb/A2561CDE98B66DD4862566510078264F?OpenDocument
Tags: NI Hardware
Similar Questions
-
Hi all
I'm just trying to perform the two functions of simple configuration in the fluke 6100 driver, but I'm getting an error (see attachment). Do you know where I can find more information on what the error message mean? Thank you!
Yik
Good afternoon
I managed to download the driver myself to try and diagnose your error and after looking into your driver more closely in LabVIEW (looking context-sensitive help for each VI), it looks like the configuration of two screws that you have found errors because (Meters.VI to set up and configure Energy.VI) are supported only by the fluke 6100 B.
I hope this helps!
Kim W.
-
Satellite T130-02F - display driver error
Hello
I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.
I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
Any advice?Mobile Intel (R) display firmware.
Windows 7 32-bit is installed.Hello
In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversAfter that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.
If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.
Welcome them
-
Satellite Pro A40 guard stop with the ATI driver error message
My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.
Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.
My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?
Thank you very much
Keith (South end)Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.
As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.
-
PROTECTED M400 Sigmatel - audio driver errors
I've been expereinceing a silent M400. I downloaded the drivers from Toshiba Web site Sigmatel and get the following error messages:
Stacgui error
Driver audio SigmaTel is inaccessible. Please make sure that it is installed and activated.C++ runtime error
Program C:\Windows\Seyestem32\rundell32,exe
The application requested execution to terminate in an unusual way. Please contact the customer support of applications.I tried to uninstall the drivers and hardware and then put it back. Has anyone ever seen the inaccessible before SigmaTel audio driver error?
Hello
What his reader, you are trying to install? Please can you tell us what OS you are using and the version nummer driver too?
-
Satellite A100-599 - ACPI ATK0100 kernel at startup mode driver error
I get an error msg (ACPI ATK0100 kernel mode driver error) at startup.
I use Vista as my OS.Please advise as to how to fix this.
Hello
Hmm the message says something about ACPI
As far as I know the ACPI is the installation of the power management of the Windows operating system. If you get this error message then, something must be wrong with the power managementHave you tried to recover the laptop using the Toshiba disk?
-
Satellite L350 - persistent master hard drive errors
I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.
My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
If the hard drive is simply borked, format or not? And if yes, what is the next step?
Could I restore windows on my drive hard slave and give up on the master?Thanks in advance.
MikeHey Buddy,
Are you sure that all these problems related to the HARD drive at 100%? How did you check that?
I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
http://www.HitachiGST.com/support/downloads/#DFTThis tool can check your HARD drive for bad sectors.
If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.
But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)
-
Hard drive error, does not start.
Computer does not start. I get this failure code:
Rw1xtw-7ax87b-mfpv6k-619403
Can't find any information on this subject, can someone shed some light on this subject for me?Hello
It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.
-
Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?
Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.
In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.
-
small bug in the FLUKE PM668x driver, where the report?
Hello
just stumbled upon a minor bug in the FLUKE PM668x driver provided in the section of the driver.
One ',' too in a format string in a cfg - vi to config: 6681 to a closed totaling.
Where to report?
However, I add the vi has changed.
Hi Henrik,
Thank you for reporting this issue, we have updated the driver and will soon issue the update.
-
No Audio device and Audio HDA Bus Driver Error Win XP SP3
Hello
I'm running a put together computer, with Windows XP SP3. I've recently accidentally got rid of my sound on my computer, eliminating the bad program in Add/Remove programs. I know that my computer is running Intel (r) 82801 AA AC 97 Audio Control. So I went to the thought of their site, I had deleted the drivers and audio devices. I downloaded the current driver, but this has not fixed the problem even with an update. So I went hunting online and found this link http://www.youtube.com/watch?v=9idzHNWZLP0
, thinking maybe that would help me even though I am not a user real tek (have intel of course). But he said that it is compatible with windows xp. I tried downlaoding it and got the error: "could not complete the installation: missing Audio HDA Bus driver.
So now, it seemed to me, I had not only a mistake, but two. I tried to download a driver of Bus HDA, but this failed. I tried to look in the Device Manager to see if there was a red or yellow marker next to my audio devices and maybe they needed to be reinstalled. Showing a problem there, he said nothing everythign was working properly. I tried to use Soundmax audio driver as well, but who was also discussed with the bus driver error. I also went to http://noaudiodevice.com , and these solutions do not work either because I was not faced with a problem of yellow or red marker. I also did this off stupidly deletling the bad thing no one updated.
I'm almost at a loss at this point and was way over my head to start.
I could really use some help. I know that my computer when I had one month ago second hand but wiped off, had run soundmax. If you need more information about my computer or screen shots please let me know. I looked at the subjects here, and none seem to adapt to this situation for me.Did you get the specific drivers for your motherboard?
If this isn't the case, remember to search the downloads specific to what you have.You can try a system restore: http://support.microsoft.com/kb/306084
-
Laptop HP 2000: hard drive error
Hello
I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.Hard drive error
Please run the hard drive Test in the diagnostic system
Hard disk 3 (3F1)I ran the test drive and that's what he said
Smart check: PAST
DST short: FAILUREHelp, please!
You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.
-
Can't turn on my XP computer, includes a multi driver error
He has a multi driver error I can enter the command prompt, but it doesn't let me do a chkdsk r he says he's busy and just a chkdsk there doing nothing, but does not go into windows? any suggestions
Hi JeannieBellLW,-What exactly happens when you try to boot into normal mode on your computer?-You receive an error message? If Yes, indicate the same.-What has been the recent change that was made on your computer before this problem started to happen?Try to start your computer in safe mode and check if you can successfully start.Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Refer to this article to do the same thing:
-
Blue screen driver error less than stop: 0x000000D1
Hi everyone-
I get the following error message when you access the Internet (such as randomnly)
Blue screen driver error less than stop: 0x000000D1 (0 x 00000778, 0xF93D8F0F, 0x00000002, 0x00000001) NDIS.sys - address F93D8F0F base at F93C0000, datestamp 41107ec
I have frankly not much idea on why this would happened because I don't use a lot of this computer. I actually erase me just my files and photos and to transfer to a USB port so I could donate to this computer. Anyone has any advice they can share? (I did an error checking and it did not work)
Computer details:
IBM Think Pad R50 series (R51)
Windows XP
Hello
1. have you made changes on the computer recently?
Follow the steps listed in the articles below and check.
Stop error message on a Windows XP-based computer: "STOP 0x000000D1".
http://support.Microsoft.com/kb/916595You receive an error message "STOP 0x000000D1" on a laptop computer Windows XP Service Pack 2
http://support.Microsoft.com/kb/888399I hope this helps.
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
TCP/IP kernel parameters NET.inet.IP.FW.verbose = 1 net.inet.ip.fw.verbose_limit = 65535 NET.inet.ICMP.icmplim = 1024 net.inet.icmp.drop_redirect = 1 NET.inet.ICMP.log_redirect = 1 net.inet.ip.redirect = 0 net.inet.ip.sourceroute = 0 net.inet.ip.acce
-
How can I change the storage of messages to drive D: (Windows 8.1)?
I have plenty of room on my D: drive and would prefer that most storage be sent there.
-
Google News is not successfully loaded
News.Google.fr fails to display properly on Firefox android
-
Changing the setting of 80% to 100% on the Satellite Z30-A-104 battery charging
Hello I used my Z30 Satellite primarily as a desktop till now (the charger is still plugged).One day I got a popup option to increase the life of the battery (charge only up to 80%) and I accepted the option. But now, I'll be traveling and can't rese
-
WiFi signal is weak on razr maxx
When I connect to my home network using wifi, the signal is very weak, unless I am under 5 feet of my router. I use a router with valet with the software up to date. Other people in my House have other droid models and no problems with the signal str