Cannot create a virtual machine with more than 256 GB

Similar Questions

• Cannot start a virtual machine with more than 1 CPU socket added

  I've set up a few boxes of ESXi 5.5 with the free license in recent weeks, they have all been without problems so far. All 4 servers have the same exact hardware

  Environment:

  Dell Poweredge T620

  E5-2630 2 Intel CPU

  40 GB OF DDR3 ECC RAM

  ESXi is installed on 2 x 146 GB 15 K SAS drives RAID-1

  Data for virtual machines store are 8 x 600 GB 10 K SAS RAID-10 disc

  Guest operating system is Server2012r2 on all virtual machines

  Installed it on ESXi 3 previous were conducted with custom ESXi 5.5 Dell without problem.

  The 4th is where I will have questions. I used the following ESXi installed just in case there is a bug somewhere

  5.5 of VMware ESXi

  ESXi 5.5 customized by Dell

  5.5 U1 of VMware ESXi

  Any version of the ESXi I use I can't have a virtual machine to begin with more than 1 CPU socket added to it. The virtual machine does not start even the VMWare BIOS. I tried the Bios EFI as well with no luck. The error message I get in the events is ' fatal error VMware ESX: vcpu (vcpu-X)-X:VM - entry failed; Valid VMCS (error code 8). The vcpu-X is always another. I have attached the log file is created. If I give the VM 1 single processor TI starts very well. I'm at a loss as to what could be the issue.

  Problem is solved. I caught another server with identical hardware, verified it worked properly, then started to swap parts between them. Turned out to be CPU1. Once this has been replaced from a working server I have not had any problems. Warranty has been appealed.

  Thanks for all the help!

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• Create a virtual machine with Maximum carrots ESXi has?

  I someone told me that VMware does not support to create a virtual machine with more than 50% of the available cores has your host. For example, I have an ESXi host with 2 CPU each with 8 cores. I have therefore 16 cores on my host. I wouldn't be able to create a virtual machine with 8 cores to be supported. Even if I am able to create a virtual machine with 16 cores? Is this person crazy me

  This is completely untrue, there is no such limitation. If your license allows, you can use vCPUs as much as your physical host has available threads and as the VM virtual hardware version allows.

• Create a virtual machine with the physical RAM total?

  I want to virtualize ESXi 4 on my MacBook Pro. However, I have 2 GB of RAM and ESXi 4 requires a minimum of 2 GB.

  I posted in the community of ESXi (is it possible to virtualize ESXi 4 with less than 2 GB of RAM?) and there is a solution for using ESXi with less RAM, but the problem is that I first need to run the installation with 2 GB.

  Basically, I tried to create a virtual machine with 2 GB, but the maximum I can use is 1840MB. Is it something that I do with Fusion to increase this limit? I understand that I am under a host operating system and requiring too little RAM, but just to get through the ESXi installation isn't it possible to push the VM of RAM to 2 GB and the host what OS increase the pagefile to deal with the lack of RAM?

  Any help would be appreciated!

  Thank you

  You may be able to edit the .vmx file and change the memsize option either 2048 or more. The merger is able to start a virtual machine with more memory that the host, just UI prevents common users to exceed the limits of security in general.

  I'm not quite sure what would happen if the VM actually tries to use all of the memory. If all goes well, it will be just talk and run slowly. Of course, the worst case are that it crashes.

• Create the virtual machine with the ISO mounted CDROM

  Community of hell!

  Working on the vmcreate.pl script to add the creation of CD-ROM with iso data store, I got stuck on the error

  ' Invalid device configuration: ' VirtualSCSIControllerOption.numSCSICdroms '.

  I'm sure I'm missing something obvious, or this option but may not understand how to deliver this.

  I created a cdrom as follows (below test I create any CDROM, no iso file to reduce the number of layers):

  my $ BPPRR m_backing_info = VirtualCdromRemotePassthroughBackingInfo->new)

  deviceName = > ' '.

  exclusive = > 0,

  );

  my $description = description->new(label = > 'CDROM', summary = > 'cdddrom');

  my $connectable = VirtualDeviceConnectInfo->new(allowGuestControl = > 1,)

  connected = > 0,

  startConnected = > 1,

  ( State = > inmates ' / ' );

  my $ BPPRR m = VirtualCdrom->new(backup = > $BPPRRm_backing_info,

  connectable = > $connectable,

  controllerKey = > 0,

  deviceInfo = > $description,

  key => 1,

  ( unitNumber = > 1 );

  VirtualDeviceConfigSpec->new(device = > $BPPRRm,

  operation = > VirtualDeviceConfigSpecOperation->new()'add'));

  Did anyone have working example to create the virtual machine with CDRom?

  Andrey

  If someone will find this useful I followed this route Re: vmreconfig.pl add the device CD/DVD fails if the virtual machine created with vmcreate.pl

  and also I found good examples of what I need to in VMUtil.pm in cmd vmsphere libraries.

  Andrey

• Create the virtual machine with the type of controller SCSI LSI logic SAS with PowerCLi

  Hey guys,.

  IM the difficulty to create a virtual machine with the type of controller SCSI to "LSI Logic SAS". The cmdlet New - VM im struggling to find where to create the type of controller?

  If you create a virtual machine without specifying a disk it will create a 4 GB SCSI type thick (0:0) hard drive 1 with 0 Parrall default BusLogic SCSI controller.

  What im wanting to do is to create a disk hard which is thin Prov. and create SCSI LSI logic SAS controller is set to.

  New-VM -name VMSTORE23 -$vmhost $esxhost MemoryMB- 4096 NumCpu- 2 -NetworkName "Vlan 6 Machine Virtual Network" | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress '00:50:56:00:00:21' -confirm:$false

  I have recived of aid by some LucD who helped direct the value of the network card in the New - VM cmdlet as follows. But I'm not able to add a hose for hard disk also like:

  | Get-hard drive | Together-hard drive - Datastore $datastore - slim StorageFormat

  And I have no idea how change the type of SCSI conroller or create it with the correct configuration?

  Any help would be great,

  Thanks in advance

  Eddie

  Greetings, steddyeddie-

  You should be able to use Set - hard drive and SCSI controller Set cmdlets to set the storage format of your hard drive and the SCSI controller type, respectively.  You were close to on the part of game - hard drive .  Try something like:

  ## get the VM object $vmVMSTORE23 = Get-VM VMSTORE23 ## set the harddisk storageformat to thin$vmVMSTORE23 | Get-HardDisk | Set-HardDisk -StorageFormat Thin ## set the SCSI controller type$vmVMSTORE23 | Get-ScsiController | Set-ScsiController -Type VirtualLsiLogicSAS
  

  It could pack in to your existing order to keep it as a good word, but for readability.

  Enjoy

• How to create a virtual machine with apps to play in VMware player?

  I know that this question was probably asked several times before. I searched for the answer and just shot to the top of threads that have a few years. I know a few things have changed since then and I didn't know how that would influence the answers. I want to create a virtual machine with specific applications that will play on VMware player. What is the best way to do it and it is possible for the weak or no cost? If someone knows a tutorial or blog etc I can follow that would be great.  Thank you

  See the article by Alessandro on that... http://www.virtualization.info/2005/12/Guide-to-create-VMX-files-for-VMware.html

• Create a virtual machine with 300G

  Hello, I am trying to create a virtual machine with 300 G on an ESX 3.5 update 3 but I can't do it, I can only create a VM of 256 G

  Is it possible to create a virtual machine of 300G.

  I have a 500G LUN with software on a CX3 - 10 c EMC iSCSI

  Thank you very much

  Change the size of block on your VMFS.

  If you create a data store, the default block size is 1 MB, which will allow you to create files up to 256 GB

  Change the block to 2 MB size. However, you will need to recreate your data store and this wil destroy all data on it!

  Arnim - van Lieshout

  -

• Can I just create a virtual machine with the installation of operating system and Application in an external drive?

  People,

  Hello. I use VMPlayer to install virtual machines a few OS in my laptop.

  Because my laptop's hard drive space is not enough to create a VM more to install Oracle Linux and its Application, can I just create a virtual machine in my laptop and then install Oracle Linux and its Application in an external USB disk?

  You can create and save the Virtual Machine in any place that you have read & write access to and enough space to support what is being installed.

• Cannot create a Virtual Machine

  Hello

  I'm using VMware Workstation 10 and there seems to be a huge issue here. I can't create a Virtual Machine. After completing the Wizard "create a new virtual machine", it seems to be to do nothing. I even tried to open the .vmx file in the Documents folder itself. No matter what I do, don't open the virtual machine. I think that its not to be created in the first place.

  I am all the normal stages and have hardware virtualization enabled in BIOS. Oh, and I checked to see if Virtual Box is running, and it works well. The problem seems to be that in VMware Workstation. Can someone please help me on this? I posted pictures of the screenshot of what records looks like at the end of the wizard.

  

  

  I solved it. It turns out that I was using incompatible software - Windows7FirewallControl by Sphinx-Soft. He created trouble for VMWare even after allowing it through the firewall.

• Create multiple virtual machines with 2 network cards

  Hey guys -.

  Been researching some scripts of difference but did not find one who will help me in my situation.

  I'm looking for a script that will allow me to clone model and apply network settings to 2 network cards.

  1 clone Vms + 20 model

  2 Let me send it to a particular lun (using a few LUNS to available)

  3. choose a custom unique specification

  4. apply intellectual property on 2 NICs (primary and backup).

  Any help would be sincerely appreciated.

  Thank you

  Sorry to lose this thread out of my sight.

  What follows is an attempt to meet all the conditions you listed.

  $numberOfVM = 20$baseVMName = "VM"$templateName = "Template"$osCustName = "MyCust"$IPBase1 = "192.168.1."$IPBase2 = "192.168.2."$IPMask = "255.255.255.0"$IPGate1 = "192.168.1.254"$IPGate2 = "192.168.2.254"$IPDns1 = "192.168.1.100"$IPDns2 = "192.168.2.100"
  
  # Target resourcepool$resPool = Get-ResourcePool -Name Resources
  
  # Get the template$template = Get-Template -Name $templateName
  
  # Create a copy of the OS Customisation SpecTry {    Get-OSCustomizationSpec -Name tempOSCust |    Remove-OSCustomizationSpec -Confirm:$false -ErrorAction Stop}Catch {}
  
  $osCust = Get-OSCustomizationSpec -Name $osCustName |     New-OSCustomizationSpec -Name tempOSCust -Type NonPersistent
  
  # Clone the number of requested VM1..$numberOfVm | %{    # Find the datastore with the most free space    $ds = Get-Datastore | Sort-Object -Property FreeSpaceGB -Descending |        Select -First 1
  
      # Update the OS Customisation Spec NIC parts with the IP addresses    Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 1 -IpMode UseStaticIP -IpAddress "$IPBase1$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate1 -Dns $IPDns1 -ErrorAction SilentlyContinue | Out-Null
  
      Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 2 -IpMode UseStaticIP -IpAddress "$IPBase2$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate2 -Dns $IPDns2 -ErrorAction SilentlyContinue | Out-Null
  
      # Create the new VM    New-VM -Name "$baseVMName$_" -Template $template -OSCustomizationSpec $osCust `        -Datastore $ds -ResourcePool $resPool  | Out-Null}
  

  The script will create clones of $numberOfVM of the model. The virtual machines will be created at the root of the bunch, and they will be called VM1, VM2...

  The OSCustomizationSpec needs to exist and must have 2 network cards.

  The script finds the data store with more free space to create each virtual computer.

  Addresses IP of NIC are consecutive, for example on NIC1 you get 192.168.1.1, 192.168.1.2... and so on.

  Let me know if you have any questions.

• ESXi 5.1 cannot start a virtual machine with Admission check has no memory error

  I see that there were a number of people who have this error and adjusting the reserve memory for the VIM under resources system has solved this problem, but not for me. My booking in the VIM process setting is '0'. Vital signs:

  Reference Dell T110 II server

  4 GB OF RAM

  Intel Xeon processor E31220 @ 3.10 GHz

  4 cores of the processor

  Hard drive 500 GB

  ESXi version 5.1

  A Linux VM with 4 GB RAM allocation, 2 cores of CPU and 45 GB of storage.

  Error I get on a attempted to start:

  Has no power on the virtual machine.

  Could not power on VM: check for Admission has no resource memory see the management of VMware ESX Resource Guide for management information settings.

  Group vm.4757: invalid memory for VM vmm0:Mitel_Applications_Suite allocation settings. (min: 524288, max:-1, minLimit:-1 actions:-4, units: pages)

  Group vm.4757: can not admint VM: admission of memory has failed. booking request: 536579 pages

  I changed the memory to the VM all the way up to 1 GB, no change.

  I played a bit with the allocation of memory VIM, no change.

  A fact interesting is that the Allocation of resources for the tab host watch memory @ 1747MB capacity, capacity reserved @ 0MB and available @ 1747MB capacity, but I have 4 GB of RAM and the vSphere Client shows it under the Configuration tab.

  Take a look at this blog post: http://www.vmwarearena.com/2012/07/failed-to-power-on-vm-admission-check.html

• Cannot create a store of data more than 1.37 to?

  Software initiator iSCSI in ESX sees the target 6 TB and when I go to create a new data store, it allows me to choose what size I want but after creation, it creates a data store 1.37 Tb in size. Have deleted and recreated many times, same blown away, the virtual disk and a bunch of disks on the san, a couple of times and recreated them still getting only datastore Tb 1.37.

  What I am doing wrong? Any help would be appreciated! It drives me crazy.

  See you soon,.

  Joe

  ESXi has a limit of 2 TB LUN. It does not take account the piece of 2 TB of a LUN when they are larger than and uses only the rest.  You will need to split the storage in all LUNS (2 TB - 512 b) 3 or less.