CVI 2009 find command

Similar Questions

• CVI 2009 errors when writing of hidden file

  I recompiled a program in CVI2009 that was previously written in 9.0.  After doing so, the program will write is no longer in a text file and the value of the hidden attribute, CVI returns the error 'access denied '.  If I delete the hidden attribute the program works very well.  I forgot to put something or is it a matter of CVI 2009?

  I remember having the same problem in versions prior to 2009.

  Hidden attribute cache file from the search functions if this is how your code finds the file in text format.

  You can use the SetFileAttrs function to display the file temporarily and then you can hide it again, if necessary.

  Hope this helps,

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• No installation option for CVI 2009 sdk

  When you try to generate a dll from a project that was created (and works very well) with CVI 8.0 using functions winSDK (winInet.lib)

  with CVI 2009

  I get "Redeclaration of FILETIME" errors. The winInet header and winInet.lib in the project are always the same found in the SDK for CVI 8.0. I couldn't find any Option to install some DVD SDK that installs CVI2009?

  Are there Versions of cvi2009 that contain win SDK and others who do not?

  Maybe a silly question, but I don't find any indication on this topic.

  Resolved: Installation - Option "Win SDK" is now "Install Win32 API", which was excluded from my installation

• Find command not working not not on Safari and iCloud Notes

  Hello

  I use a lot the iCloud Notes, that means I have a lot of notes I need to quickly when I'm on my laptop and the f command / find command doesn't seem to work when the notes to find. Is it possible that I can solve this problem or report it fixing? Or y at - it an easier way to go about this?

  Thank you and best regards

  Paragraphs

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  http://www.Apple.com/feedback/

• CVI 8 has problems with the code of CVI 2009 - why?

  I use NI CVI 2009 and thus programmed. Now, I bought 8 CVI and wants to continue programming. But CVI reports errors in the source code of the ICB 9 and I do not understand what is the problem?

  example of

  char save [size + 1];

  Erros

  128, integer 22 should be constant.
  ...

  What is the problem with this simple line of code that worked perfectly before?

  Unfortunately the statements of variable length arrays is a feature of c99 is supported in CVI9, but probably not in version 8. If you use CVI8.5, you can try to add this pragma at the code and see if that fixes the problem, but according to this list of features posted by Luis, I'm not positive in this regard:

  #pragma iso_9899_1999;

• Liaison GPIB CVI 2009 real-time error

  The code of source GPIB only call the ibdev function.

  ibdev (0, 1, NO_SAD, T10s, 1, 0);

  When I tried to compile the code source GPIB CVI 2009 real-time, I received the error message following link.

  Project link error:

  Symbol not defined "__imp__GetCurrentProcess@0" referenced in "c:\program NIUninstaller instruments cvi2009\cvi2009\bin\msvc\cvistart.lib '...

  But the GPIB source code can be compiled and run under windows XP.

  Any help out there?

  Thank you.

  Vincent,

  Hello.  First of all, I wanted to mention that the NI GPIB library is not officially supported on systems time real LabWindows/CVI.  Your customers use it more in the earlier applications of CVI RT?  Can you tell me what features they use?

  While the NI GPIB library is not officially supported in CVI RT, errors of link that you see in CVI 2009 were not intentional.  You can tell your customer to copy the file gpib.lib to the location of the CVI 9.0:

  \National Instruments\\bin\msvc\gpib.lib

  the location of CVI 2009:

  \National Instruments\\bin\msvc\gpib.lib

  This should fix the problem.

  If your client has never repair or reinstall their installation of CVI 2009, they will have to make this change again.

  We intend to fix this in the next version of LabWindows/CVI.

  -Jeff

  NEITHER

• CVI 2009 Build Distribution: create shortcuts

  When I change the settings for Distribution to build, I want to install my application under C:\Program Files\myFactoryDir\myAppDir, so in the "Edit" window, I use the tab "Files" to change "Installation of files and directories" as I need.

  So, I want to create the following shortcut:

  [Start>>Programs]\myFactoryDir\myAppDir\myApp.exe

  but I'm not able to specify "[start > programs] \myFactoryDir\myAppDir" as the Destination Directory (in the menu ring, only [start > programs] \myAppDir is available).

  Is it possible to do in CVI 2009 (as I am used to doing with LabVIEW)?

  In fact, please ignore the previous screenshot. Looks like I misunderstood where you want to place your shortcut. But it's even easier, then, since all you need to do is to rename the folder shortcut in the files tab:

  

• Cannot compile the project in CVI 2009 which were previously opened in CVI 2010

  This was extremely irrititating and does not know what the devil.  I have a computer with CVI 2010 and separated with CVI 2009.

  I have a project and the CWS, which was established in 2009.

  I opened and recompiled in CVI 2010 things since then, ensuring that I saved my .uir file in a CVI 2009 version or earlier.

  I usually open the file .prj or .cws on my computer of CVI 2009, but trying to compile and run in debug mode, all of the CVI crashes.  How can I recompile and work with it on my computer of CVI 2009?

  Am I missing something here?  Tehre are no error, warnings or reports of incidents, CVI righteous acts as I hit Alt + F4

  
  

• the .c and .h files still open in CVI 9.0 even with CVI 2009 is installed

  I had this problem for a while but have managed to live with her. Since I installed LabWindows/CVI 2009 my .c and .h files still open in LabWindows/CVI 9.0. all .cws, .fp, .uir and .prj files will open in 2009. I tried the files in "file types" remapping and even fiddled with the registry to try to get the .c and .h files to open with the correct version of the CVI. This has been without success.

  Any help would be appreciated.

  Thank you!

  I found myself fixing entering into the registry and change the path to cvi.exe. He was always set the path to the executable file for CVI 9.0. That's what the types of files for .c and .h files were SEO even if I selected the executable file in 2009 of the CVI.

  It seems that the path was never changed when I installed CVI 2009.

  Regards-

  John o ' c

• "find command" highlights all of the front panel

  I inherited a State medium-sized machine and documenting. If I double click on a control in the FP, need me just to the element in the comic book.

  Conversely, if I double click (or right click--> the find command) in the comic book, he takes me to the FP and the whole thing is highlighted / found.

  The public Service as a whole is based on the tabs.

  A lot of controls / indicators are hidden by the nodes property.

  The code does not currently due to a large number of hardware DAQ not hung.

  Thanks for your suggestions!

  Brian L

  I saw this happen when controls are grouped. Check if the controls are grouped and separating them.

  DAQ with DAQmx devices you can create DAQmx simulated devices (assuming you have the version of DAQmx supports the simulation of these specific devices). You can create simulated devices DAQmx in MAX.

• Find command not not highlighting every search results

  Hello

  Acrobat 9 Pro, Mac OS 10.6.8

  This seems to be a fairly new problem.

  When I do a search - using the Find command - of a PDF document for a particular word, Acrobat in some cases place the cursor to the right of the word while in other cases, it highlights the word with a blue color. How can I get the program to find and color highlight all occurrences of the search term?

  Thanks in advance,

  trmartin

  This is a bug in the version 9.4.5. Should be fixed in the next update.

  You can roll back the update if it's a big problem for you.

• is it possible to cmd + f ("Find" command) to use the already selected text? (OSX)

  Starting essentially, I want to find the next occurrence of the text on the page. Now I have to cmd + c (copy), cmd + f (search), cmd + v (paste), cmd + g (find next), whereas it should be (at least a possibility) to do just cmd + f and cmd + g

  Hmm, under Windows, it works this way, so I'm expecting it to be the same on Mac. For the most part.

  If command-f is not, could you try cmd + e instead? Who behave as expected?

• Help CVI (CVI 2009) on the obsolete external compilers?

  Hello World OR,.

  said that assistance from the CVI on 'create an optimized code'

  Note  You cannot compile 64-bit applications using external linearization compilers.

  Instead, there is a model for Intel C++ 11.1 configuration file 64-bit...

  So I have reason to assume that the help is outdated?

  Moreover, I am happy to find that ICL 11.1 is now supported by a model :-)

  Wolfgang

  Wolfgang.

  You are right.  I filed a bug (199382) report to ensure that this documentation is updated.

  NickB

  National Instruments

• CAObjHandle handle ActiveX object to the NI LabWindows/CVI 2009 Server

  Is there a way to create a CAObjHandle on the ActiveX of LabWindows/CVI server without opening a new application of CVI?

  A bit of history, I am trying to automate the creation of files in HTML help by function panels. Thanks (http://forums.ni.com/t5/LabWindows-CVI/Is-there-a-way-to-automate-generating-the-documentation-from-... I have found that there is a function that exist to achieve this.

  CVI_AppGenHtmlHelpFromFPFile is the function that I need to call, but I got a handle created.

  I can get a handle to it using the CVI_NewApp function, but the problem is that it opens a new application of the CVI (which is certainly not favorable). At a very high level I need this feature to treat more than 100 panels of function in order to see how this can become a bit extensive and involved to open CVI every time. It should be a relatively small appilcation of command line that basically takes the path of the file and go to CVI_AppGenHtmlHelpFromFPFile and it does its magic.

  Any help on this would be greatly appreciated.

  Thank you

  Do you need to treat each Panel function in separate your program calls? If so, is it possible that you could treat several panels by invocation?

  If you're really stuck to running a separate process each time, can you pass some indicator of command line to your program to tell him to close CVI or not? If you don't stop it, then your program can always use CVI_ActiveApp and it would keep reusing the same instance of the CVI over and over again. Then when you call your program for the last Panel of the function in your loop you might pass a command line flag saying it close CVI before leaving.