Cannot create the EIS data source

When you try to create a new DSN in the ODBC Administrator get the error:
Error "routines of installation for the ODBC driver cannot be loaded due to system 193 error code".

can someone tell me how to handle this error

the installation creates problems during a previous installation

look for 5.2 drivers are available in \HyperionHome\Common\ODBC-64\Merant\5.2\Drivers.
Run... / HyperionAnalytics/bin/RegUpdateODBC51.bat. > Open regedit>>/HKEY_LOCAL_MACHINE/Software/ODBC/ODBCINST.ini/Merant OEM 5.1 64-bit. > backup key. > export key. > edit the export file.
If you have 5.1 replace 5.1 5.2 in all cases
Replace the 21 22 for all DLLs
Make sure driver = the way of the driver in step 1
(8) save the key file.
9) double-click a key file to update the registry.
(10) in ODBC Data Source Administrator, you should now see the 5.2 drivers under drivers Tag.
(11) add the ODBC connection.

Once installed, go to the registry under:
HKEY_LOCAL_MACHINE/Software/WOW6432Node
Select the driver of Merant 32 bit that you plan to use, for example
MERANT 5.2 OEM 32-BIT Oracle Wire Protocol
and verify that the following entries have been added.

If they are not there then add them manually:
'Driver"="C:\\Hyperion\\Common\\ODBC\\Merant\\5.2\\Drivers\\arora22.dll '.
'HelpRootDirectory"="C:\\Hyperion\\Common\\ODBC\\Merant\\5.2\\help '.
'Setup"="C:\\Hyperion\\Common\\ODBC\\Merant\\5.2\\Drivers\\arora22.dll '.

The path must point to your location of HYPERION_HOME.

Once open the 32-bit ODBC Administrator of:
C:\Windows\SysWOW64\odbcad32.exe

Add a new system DSN using the correct driver and connect to the Console of IST use this DSN.

If you are using Oracle, you MUST use the Oracle Wire Protocol driver and NOT the driver Oracle standard Merant.

If you use the standard driver, this message may appear when you try to connect from the Console of the EIS:
2003000 error: Specified error ODBC driver could not be loaded because of the error system 193 (5.2 Oracle 32-bit OEM Merant)

Tags: Business Intelligence

Similar Questions

ORA-19504: cannot create the file '+ DATA '.

Hello everyone.
This is the scenario:
We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.
For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.
I tried the simple guide that I found which is:
(1) copy the backup files cold /somedirectory
(2) start OLD database with nomount
(3) connect RMAN with OLDER as an auxiliary
(4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.
Here's the result (I deleted some lines because of the size of it):
----------------------
RMAN > ProdDB to OlderDB DUPLICATE DATABASE
2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.
3 > NOFILENAMECHECK.
4 >
From October 1, 14 Db double
content of Script memory:
{
clone of SQL 'alter system set control_files =
"+DATA/OlderDB/controlfile/current.829.859839217" comment =
' Set by RMAN "scope = spfile;
clone of SQL 'alter system set = db_name
"ProdDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"OlderDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';
change the clone database mount;
}
execution of Script memory
SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile
SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile
(...)
From restoration to 1 October 14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
channel ORA_AUX_DISK_1: restore the control file
channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03
output file name=+DATA/OlderDB/controlfile/current.829.859839217
Restoration finished in October 1, 14
mounted database
output channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
content of Script memory:
{
until the SNA 274262921.
the value of newname for datafile clone 1 again;
the value of newname for datafile clone 2 again.
the value of newname for datafile clone 3 again.
the value of newname for datafile clone 4 new ones;
the value of newname for datafile clone 5 again.
the value of newname for datafile clone 6 again.
the value of newname for datafile clone 7 again.
restoration
database clone;
}
(...)
From restoration to 1 October 14
using the ORA_AUX_DISK_1 channel
channel ORA_AUX_DISK_1: from the restore backup set data file
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA
channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA
channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
ORA-19504: cannot create the file '+ DATA '.
ORA-17502: ksfdcre:4 cannot create the file + DATA
ORA-15041: diskgroup space 'DATA' exhausted
switch to the previous backup
Oracle instance started
(...)
content of Script memory:
{
clone of SQL 'alter system set = db_name
"OlderDB" comment =
' Restore the original value by RMAN "scope = spfile;
clone of SQL 'alter system reset db_unique_name scope = spfile;
clone to stop immediately;
}
execution of Script memory
Errors in the script of the memory
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
ORA-06512: at line 1
RMAN-05556: not all data files have backups can be recovered on SNA 274262921
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014
RMAN-05501: abandonment of duplicate target database
Complete recovery manager.
------------------------------------------------------------------
The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.
First thing I took a glance was ASM occupation but it enough available space.
The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.
One have some advice on what I should look for?
Thanks in advance sorry for my English.
Select this option.

Hello.

Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

But I solved my problem... To the auxiliary database, I added the following to the spfile:

DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

Cannot remove the EPMA data source
Greetings,

I have a data source in the library of the Application that is used to be associated with a database of the EPMA Planning. This database has been removed after deployment and recreated (but not deployed). I need to remove this source of data and recreated. When I right click on the DS, the only option non-grise's Edit. The delete option is greyed out. Any way I can remove this SQL DS or other means?

Thank you
CG
Maybe the data source is always associated with an application, if you go into the database system planning and HSPSYS_DATASOURCE, related to the data source and check if the APP_ID has the value - 1, if it is not then it is always associated with table id is associated with an application in HSPSYS_APPLICATION.
If there is no association, but it is not set to-1, then you can see it-1 and then restart the service and try again.

See you soon

John
http://John-Goodwin.blogspot.com/

Cannot create the local data store more Go 558,75

See attachment.
New installation of ESXi 4.1.0 try adding a local data store. Local volume is a to 4.55 RAID 5, fully initialized.
Add storage
Choose the device, etc. Choose the size of 8MB block and "ability to mazimize. Summary On screen looks like its going to do what I ask... I cliquerai finish.
Produces final is 558,75 Go. Any ideas?

ESX(I) supports no more than a little less than 2 TB LUN. Divide your table into smaller LUNs

Cannot create the data source to SQL Server

Hi people,
I am running IIS, Windows XP SP3, SQL Express 2005, Trial Version of ColdFusion 9 (no patches).
The administrator using ColdFusion, when I try to create a data source for SQLExpress 2005 (SQL Server Express), by using the SQL Server driver, I get the following error:
Connection verification failed for data source: AMT
java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.
The root cause was that: java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] the requested instance is not valid or is not running.
The "instance", which I interpret as meaning the database instance, is "machinename\SQLExpress" (it is a so-called "named instance"). That's what I enter in the "Server" field of the display (data & Services-> sources-> Microsoft SQL Server).
However, I am able to create an ODBC data source name in Windows using the driver Microsoft SQL Server Native Client Version 09.00.3042 and the same instance, "machinename\SQLExpress".
Does anyone have any ideas as to what is wrong?

Try to use the domain name TCP/IP (or IP address) and port instead of the info of the connectivity of Windows style. You may need to enable TCP/IP as a network on the DB server protocol well (I think it is disabled by default on SQL Express Ed).

--

Adam

11.1.2.3 EPM environment - cannot create the sample HFM application.

Hi Experts,
I have a particular question of HFM on newly built EMP 11.1.2.3 environment - cannot create the sample HFM application.
HFM: 11.1.2.3.100
OS: Windows Server 2008 R2 Enterprise Server 64-bit
I get "Unspecified error", when you create a sample Application using the workspace.
HFM. ODL.log:
[2014 02-09 T 21:35:15 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHFMCASSecurity.cpp] [line: 546] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: the system cannot find the specified path.]
] [paramString:] unspecified error
[2014 02-09 T 21: 35:16 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHsxServerImpl.cpp] [line: 4890] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: STAT] [paramString: admin@Native Directory;] Unspecified error
Viewer application event log:
Log name: Application
Source: Hyperion Financial Management
Date: 09/02/2014-15:35:16
Event ID: 11
Task category: no
Level: error
Keywords: Classic
User: AD1\! fdminstall_abc
Computer: auhodtest.oracle.com
Description:
Error 11;! fdminstall_abc; 09/02/2014-15:35:16; CHFMCASSecurity.cpp; Line 546; <? XML version = "1.0"? >
< C'estr > < Ref > {92DCCDF8-B8C1-4F61-B858-BDADFAE401B0} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147467259 < / Num > < Type > 1 < / Type > < DTime > 09/02/2014-15:35:15 < / DTime > < Svr > auhodtest < / Svr > < file > CHFMCASSecurity.cpp < / file > < line > 546 < / line > < worm > 11.1.2.3.100.4261 < / worm > < ExErr > the system cannot find the path specified.
< / ExErr > < / CSEC > < / C'estr >
Could someone please suggest me some tips on this problem of creating application - HFM?
Thank you
KK

Sharing the fix in response to the post here:

The 'Unknown error' error was due to the fact that underlying configuration of HFM with Foundation was broken and so HFM complained of another error, "the system cannot find the path specified".

Then as an effort to solve the problem, in a scenario where I had to uninstall, reinstall and re-config component HFM which solved the problem.

Thank you

KK

Application of metadata are not available. Cannot create the grid

Hello
I use the standalone 11.1.1.3 HFM. When I tried to open the gates of existing data through the workspace, I receive the error message that "Application metadata are not available." Cannot create the grid '. Please could you help me solve this problem.

Thank you
Michel K

Hello

I'm not sure what you mean, but if you're not comfortable with these tasks, you may have to get a consultant.

The main steps are:
1. Connect to the source application and extract security tasks > extract tasks > excerpt from security.
2. Save the .sec file in your office
3. Connect to the new application and load the .sec since tasks file > load task > Security load.
Kind regards

Thanos

With JNDI error when you create a new data source
Hello:

This weekend, when adding new applications in the production environment, we had a problem where the new managed servers JNDI tree was inaccessible.

We have seen the error message was:

####
< 1364066840022 > < BEA-149231 > < cannot create the activation state to true for the application "EOI".
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.common.ResourceException: is already bound
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

We traced the issue to a new data source that has been added were we found that along with the entry of jndi name expected in the jdbc xml file, there were two empty entries:

< jndi name - > weblogic.jdbc.DataSource.EOI < / jndi-name >
< jndi name - > < / jndi-name >
< jndi name - > < / jndi-name >

The data source has been removed, consoles restarted, the re-created data source and the problem happened again. To get through the issue, had to manually remove empty tags in the xml file.

We have created 2 new sources of data, and it happened only on the spot. The same data source each time. In addition, this question moved not when these changes have been made in our regions of bass (development, qa).

The version is the same in all three regions.

WebLogic Version:
WebLogic Server temporary fix for 9324911 Wed Feb 03 22:38:01 PST 2010
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967

Is this a known issue? And if so, is there a way to avoid it, other than to start checking the newly created XML files permanently?

Thank you

Ted
Yes, it's a common problem documented in the Oracle documentation:
WebLogic Server: Get ' weblogic.common.ResourceException: is already bound ' exception with name JDBC JNDI (Doc ID 1154250.1)

The only solution is to remove the empty value entries.

Bravo!
AJ

ColdFusion 10 - cannot create the database

I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:

Server product	ColdFusion
Version	ColdFusion 10,282913
Edition	Developer
Operating system	Windows Server 2008 R2
OS version	6.1
Update level	/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
Version of the Adobe driver	4.1 (build 0001)

Details of the JVM

Java version

1.6.0_29

History of this server:

A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.

I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

Error just after the attempt to create the data source:

Connection verification failed for data source: andHalt

org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

at java.lang.Thread.run(Thread.java:662)

Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

... 13 more

Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

... more than 10

Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

at java.security.AccessController.doPrivileged (Native Method)

at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

... more than 10

= launch nested exception, level (1) =.

java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.