TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP
My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008. I have not changed any hardware, software, etc. I do not use it for games, only for things such as e-mails and visit websites
Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer. It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load. When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.
As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped. I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.
I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed. Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.
This left me confused. If there is a problem with this device, no solution seems to exist.
Any help that will allow my laptop to function normally is welcome.
I understand that you want to know if the teredo adapter can cause performance problems.
The teredo adapter should not cause performance problems. It is really just used to allow devices work IPv4 with IPv6 Internet service provider. If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider. For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.
This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager. Unless you are using IPv6, this shouldn't really be a problem.
If you start in safe mode, the performance problem persists? Turn on the computer and press F8 once per second for the Mode option, safe mode with networking. This will help you to further isolate the performance problem.
Furthermore, does this happen that the adapter is connected or not?
Tags: Notebooks
Similar Questions
-
My Teredo Tunneling pseudo-interface iis does not
Teredo Tunneling pseudo-interface is not working. It displays an error Code (10). How to solve this problem?
Cultural12
You have Zone Alarm installed?
It is a known problem if you have Zone alarm installed. If you have installed remove it at least to check
To disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
-
Webcam USB 2.0 on my laptop with windows vista error device does not work correctly
Original title:
I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.
I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.
Hi Matthew,
The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.
Now, check out these links and return to the State of the question.
When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.
Here are a few common problems with drivers and the means to solve them.
See the following link for more information:
Tips for solving common driver problems
Also check out the following link and run the fixit available.
Hardware devices do not work or are not detected in Windows
The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
-
Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".
I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.
I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
entries that do not fix the resolution of problems and those who "could" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
Parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Microsoft Teredo Tunneling adapter device"does not work correctly.
Hi Sir/Madam
Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time
Hi Binet1,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling. You can enable system restore by following this document.
I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
Please respond with an operating system that you are running:
Operating system Windows am I running?Please let me know.
Thank you.
-
Equium P300-16 t - Synaptics Pointing Device does not work correctly
I hope someone can help.
Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver
Looking forward to any help you can give.
Suggest that you reinstall simply touch pad drivers. Maybe new version?
So, just uninstall drivers, restart your computer, reinstall the drivers.Drivers are located on the download page of European drivers.
-
HARD drive external "this device does not work correctly"Code 10"
Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)
I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.
The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!
Need help please!
Hello
Method 1:
See the link and check if it helps:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Method 2:
Check the link and try to run the Microsoft Fix it:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
My instant HDTVPCI ADSI device does not work correctly.
As I said earlier, my instant ADSI HDTVPCI device is not operational, and Device Manager cannot start or reset for me. Please help me to fix this problem, thanks. William Schotts.
Hello
Follow these methods and check if that helps:
Method 1:
Try running the fixit from the link give below and check if this can help:
Hardware devices not detected or does not
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
If the drivers are not installed automatically install use the software that came with the hard disk and install the drivers and software. Refer to this article:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
-
error code 10
http://support.Microsoft.com/default.aspx/KB/943104
Take a look at the KB and see if that fixes it.
-
HL-DT-ST DVDRAM GT32N SCSI CdRom Device does not work correctly
Hello
I have this unit in my ASUS laptop: HL-DT-ST DVDRAM GT32N SCSI CdRom Device,.
and it is not read most of the inserted discs. Prints are better, but is not able to read one of my CDs or DVDs written at home.
A few years ago I tried to solve the problem and that I can remember other users had the same problem and the driver update has been recommended, but I also discovered that the support for this product is complete, and I couldn't find all the archives. I dropped.
Now I'm able to download a driver is already installed on the computer that has the version number: 6.1.7600.16385.
I suppose that there could be problems other than the driver himself.
Help, please!
Hello
Try to clean the disc with a cleaning disc.
If cleaning doesn't help not the drive has a hardware problem, since it corresponds sporadically.
For discs do you you try to use the format of the ISO image.Should which CD or DVD format I use?
http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use=====================
Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.
Hi Amit,
Thanks for the reply.Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957
Step 2: See the articles for the problems of driver on the computer:
Update drivers:
Updated a hardware driver that is not working properly
Automatically get recommended drivers and updates for your hardware
Note: The article applies to Windows Vista too
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Step 3: Run the hardware troubleshooter
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
To solve the problems of slow computer performance:
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss
How to make a computer faster: 6 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Please let us know the result. If the problem is still not fixed, we will be happy to help you further.
-
Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...
OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop
Hi Shilratna,
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
I suggest you try the steps from the following link:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-usI hope this helps. Let us know if you have other problems with Windows in the future.
-
I've never seen this problem before. The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface. The driver update does not work, and apparently the last and the best driver is already installed for this device. I tried to disable and searching for the hardware changes. Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point. It is said that the device cannot start. I rebooted the machine to see if something has changed. There can be no.
I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category. I ran diagnostic system provided by HP software, but nothing seems to be defective.Hello
1. What is the code that you see under the status of the device and the exact error message?
2 have you made changes on the computer before this problem?As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.Step 1: first of all, I would say you temporarily disable any security software and then try to install.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-offNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 2: Now try to install the drivers
a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. identify the sound card, right-click on it and select Properties .
c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
Restart the computer and install the latest driver.Reference: Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problemsGet help with Device Manager errors
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors -
I found "Teredo Tunneling pseudo-interface" which showed a yellow exclamation in device under network adapter & just below the Realtek PCIe Ethernet controller Manager & the error was that the driver does not work properly. This is why unfortunately I uninstalled the driver. now, who disappeared from the Device Manager & I can't find even after restarting the system.
so kindly advise me what is the problem if it does not fit in its original location & how to get it in the Device Manager?Please find the screen pictures of the error for your reference on skydrive https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105Rgds,Hello Asif,
Thanks for the reply.
It could be that he was corrupt entry that has been duplicated. Uninstalling the one with the bang yellow doesn't cause problems with job entry.
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
Maybe you are looking for
-
the Sierra with the old Mac compatibility
I use two computers, both running under OS El Capitan. I have an iMac from early 2011. It run Sierra? I have a MacBook Pro of 2009. It run Sierra? What happens if my iMac has Sierra and the MacBook Pro has El Capitan? Sierra 'modernize' my photos so
-
How to fix the calendar to crash?
Thunderbird is getting hung up a synchronization schedule and he ends by blocking the program or consumes just CPU so I have to kill him. It's a google calendar, which worked well for the last ~ month. Here's what happens: I launch Thunderbird and it
-
Playing audio from inside of a state machine without stopping execution
I created a state machine that acquires and analyzes the input signal and the state transitions based on triggers found in the breast of this signal. In a particular State, I need to read a pre-recorded file (right now I'm just using a file .wav for
-
Manager memory ADO not retune the memory freed from previous calls to the system.
Original title: TEEN memory Pool I'm working on a project dealing with large sets of data, growing a little in subsequent calls. The memory usage indicates that the Manager memory ADO is not retune freed of previous calls memory to the system, mayby
-
I will not be able to use the software. I have Windows Vista. I thought I had the necessary software requirements.