cannot create the preview and smart overview

Similar Questions

• Trying to install Zune. I get an error message 'cannot create the folder' and access is denied. Why.

  I just installed window7. reloaded many of my programs, but I am unable to load the Zune because it cannot create a folder. Why.

  [Moved from comments]

  I tried your suggestion. However, it did not work. I also did a disc clean after loading Win 7 32 bit and which did not help either. I solved the problem by creating a new folder in the program folder has no name but the left is like "new folder" Zune then installed in the folder. Trying to rename the new folder, it would not except Zune so I just named it 'Phone' Zune works well, thank you for your help.

  David

• Cannot create the keystore and SSL certs Director host

  Hello group,

  I'm standing, a laboratory director.  I have ESXi host with vCenter data center far away at the square.  When I try to configure the host of the Director (RHEL5 - completely up to date) I'm unable to create a self signed cert.  I am running this command, copied directly from the 'Cloud master and Guide of Installation Configuration', page 19

  keytool - keystore certificates.ks stores - JCEKS - storepass passwd - genkey - keyalg RSA-
  http alias

  I get the error unrecognized command:-keystore

  If I mix autour settings a bit and put the command - genkey first I invite myself to enter the fully qualified domain name, but as soon as I enter the FULL domain name I am presented with an error on the JCEKS stores.

  I'm under java version 1.4.2 on an install RHEL5 completely up to date.

  Any ideas would be greatly appreciated.

  Thank you!

  You must use a copy of the utility keytool taking support Java 5 or Java 6. 1.4.x and older don't work not (any more than the utility keytool GCJ). The simplest solution is to use the copy provided by vCD: / opt/vmware/vcloud-director/jre/bin/keytool

  You must use the absolute path or remove the existing Java runtime system and set the appropriate PATH environment variable.

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it displays a message that LR has to leave because he cannot read the preview files and it will try to fix

  I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it shows a message that LR has to leave because he cannot read the preview files and it will try to fix it the next time's lance.  I get the same message to another and whenever he throws so I can't launch LR at all now.

  I get the preview of a file has been corrupted somehow.  Is it possible to fix this without having to build a new catalog?

  Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You must remove this folder, and then restart the Lightroom. Lightroom will generate a new folder of previews.

• At startup, LR 4.4 cannot read the preview cache and stops

  Can't open LR 4.4.  Get LR error message cannot read the preview cache and needs to close.  Says he will try to repair to the stimulus.  That happened after that laptop battery so closed that I was in LR.

  Do you this for your operating system, using the Explorer or Finder, without LR running.  You must delete the FOLDER that is located in the same folder as your LR catalog, but with a name starting with the same name as your catalog but then including a Previews.lrdata suffix.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• says device cannot create the folder

  have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB

  It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/

  Good luck, I know how much vacation photos can mean.

• Cannot create the folder on the storage device

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  =====================================
  The dialog box you received usually indicates that there
  are too many files copied to the root directory of the
  flash drive.

  The solution is to remove one or more pictures and
  create new empty folders in their place... then move
  all the photos in the files... problem solved.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

  Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

  I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.
  Thanks for your time.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.