connection to the site with Yahoo credentials ePrint

Similar Questions

• Would not connect to the site with minor certificate error

  After the upgrade to firefox 15, I can't no longer connect to my company's Web site. It uses a certificate that gets a validation error, because CN does not match the address of the web site (extra character in the NC).
  In all previous versions of firefox, after that he reported the error, it would allow me to continue anyway if I chose. I did it every two weeks for a year, but now it won't let me continue. T

  16 of Firefox (and 17) solved this problem for me.

• Problems with 'Connection to the Site target' where is the log file?

  Hi all!

  I am VSphere replication deployment to 2 VCenter servers with 1 Center Server in a lab environment. I successfully deployed and saved VRM devices to both VCenter servers. I also installed the SRM agent on the same VCenters servers as well. Both plugins are appearing in both VCenter servers. When I try to connect to the site target either VCenter, I get the following error below after I click 'OK '. What log file should I look at to determine my problem?

  

  I solved this problem today.

  I had the two configuration of VCenter servers for both use TCP 8080 for HTTP traffic, I have uninstalled/reinstalled VCenter at both ends. I accepted the default 80 TCP HTTP this time and I was able to connect to my remote / targeted VCenter in the connections section.

  What is strange, is that the VRM devices said they used TCP 8080 to save the VRM instance/database on the Service Platform controller (VCenter) and recorded everything very well. I was able to perform very well with configured TCP 8080 local replication.

  My company has sometimes display TCP 80 a vulnerability and try to use other ports where possible.

• I am unable to connect to the site of reliance power.

  This is the New Zealand question: I tried to open a session on Trustpower website with an energy of number and a password given to me by Trustpower. I spoke to 2 people of this problem and they have proved to me that they can lohg to and view my account which is what I want to do, but can't

  Original title: hard to connect to an energy supplier to view my account details

  Hi BryanMcIntyre,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with the connection to the site of reliance power. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team and try to get this fixed number.

  We start with a few questions-

  (1) the expression that exactly happens when you try to connect to the site of reliance power?

  (2) do you get any error code or error message?

  (3) you are able to view the Web site?

  (4) is this specific issue on the site of reliance power?

  (5) have you tried logging on to the site from another computer (running the same version of Windows)?

  (6) what is the version of Windows installed on the computer?

  (7) what is the version of Internet Explorer installed on the computer?

  I would like more information about the issue.

  Method-

  I would have you look at the article-

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If the problem persists, I would like you to contact technical support to be able to trust.

  Check out the link-

  http://support.TrustPower.co.nz/

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Connection to the site error

  Im trying to add a site, but im getting this error:

  "To connect to the site target for setting up replication." failed for the entity with the following error message.

  Unable to connect to the specified site. The site is perhaps not available on the network or a network problem may exist. Check your connection details and try again.

  VRS and Mrs. can see between them.

  There are a few points:

  -The target site uses port 81 (Im specify it)

  -J' have already a VRS/SRM connected to another site, I added another

  Everything seems to be fine with the connection. Any ideas?

  Hello

  What VR version do you use? There have been corrections to the support of the custom port for the proxy reverse vCenter.

  In addition, if you use VR<5.8, which="" ui="" are="" you="" using="" to="" configure="" the="" vr="" pairing?="" c#-based="" one="" or="" the="" one="" in="" the="">

  Details for the failure will be probably available ball VRMS at the source site (/ opt/vmware/hms/logs/hms.log) or vsphere client - virgo.log (If pairing is done via the WebClient service) to vCenter machine.

  Kind regards

  Martin

• Unable to connect to the sites - msjava.dll error

  I finally got a new PC with Windows XP (Windows 2000 before a). I installed contribute CS3 and it works fine when I connect to two of my sites that are internal to my organization (hosted by us). The other two sites are hosted by an ISP outside of our Organization, and I am unable to connect to those. Other users can connect to external sites with Contribute, so I know that's not a problem with the access provider. When I try to connect, I get the standard Windows error box which States "Contribute has encountered a problem and needs to close. We are sorry for the inconvenience. "and when I click to see what is in the error report, the ModName is msjava.dll. I did a search for msjava.dll on my system, and it does not exist in my windows folder.
  
  If anyone else has experienced this? Any advice on how to find/fix this problem?
  
  Thank you
  Kathy

  I solved this problem. I went on the site of Sun Java and downloaded the latest version. Once has been installed, Contribute worked very well.

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Tecra M3 has ceased to connect to the internet with cable

  I have an old laptop Tecra of 3 year (out of warranty).
  Last week, he stopped to connect to the internet with a cable. I tried several cables and jacks. No idea what to do?

  LAN card is entered correctly in the Device Manager?
  LAN port has two leds, green and orange. Green LED is turned on when you connect the LAN cable?

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

  I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

  Hi Chloe,.

  1. What is the exact error message?
  2. Since when are you facing this problem?

  However, try the following steps.

  Step 1: Add zune except for windows firewall.

  1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

  2. click allow a program through Windows Firewall. Collapse this includes this image
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. click on add program.

  4. click on Browse.

  5 locate the Zune and then click Open.
  Note By default, the Zune is installed in the following location:
  C:\Program Files\Zune\

  6. click OK twice.

  Step 2: Windows live onecare

  1. Start Windows Live Onecare.
  2. Click change Onecare settings.
  3. Click the firewall tab.
  4. Click on Advanced settings.
  5. Scroll through the list of programs to determine if Zune appears in the list.

  ·         If Zune appears, make sure that the Zune is set to allow instead of block.

  ·         If Zune does not appear, follow these steps:

  1. click on Add.

  2. Locate the Zune and then click Open.

                  Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

  3. click OK twice.

  http://support.Microsoft.com/kb/927980

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• Tabs Panel: How can I designate a default tab? The site with the tab wanted to selected download does not work for me.

  I created a tab panel and applied some styles to tabs. (Drop shadow and change the stacking order so that each tab casts a shadow on that below.) Now everytime the page loads, it will default to the lower tab. The only suggestion that I've seen is to save and load the site with the desired tab is selected and 'active'. This does not seem to solve the problem.

  Hmmm, have you looked into this widget from MuseGrid? It looks like roughly what it takes for this?

  News a new star | Adobe Muse Widget | museGrid.com