Cannot create the standby database
HelloOS - Win XP Pro
Oracle - 10.2.0.1
I'm creating a database of watch on the same system where I have my primary database.
When I run the script below, I get the below error:
RMAN > run {allocate channel prmy1 type disk;}
2 > allocate channel prmy2 type disk;
3 > allocate channel prmy3 type disk;
4 > allocate channel prmy4 type disk;
5 > allocate auxiliary channel stby type disk;
6 > duplicate target database for the eve of the active database
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'from': expected an of: "dorecover, db_file_na".
me_convert, nofilenamecheck "
RMAN-01007: in the file column 39 line 6: entry standard
What I'm doing wrong here. The same script I used it on an 11G database, and I was able to create the database from the previous day.
You use an improvement of 11g (for the active database) in a 10g database
Solution: convert the statement to comply with 10g.
Order duplicate is documented in the Handbook of Rman for 10g.
---------
Sybrand Bakker
Senior Oracle DBA
Tags: Database
Similar Questions
-
create the standby database using backup to restore
Hello
I'm creating a database ensuring 11g using a manual process of restoring a backup, but nothing helped. I can restore same failed backup.
Here are the steps that I followed (courtesy of ORACLE-BASE) BASE-ORACLE Data Guard physical standby Setup in Oracle Database 11 g Release 2 -
I'm confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, I have to stop the primary db? given that control01.ctl is updated all the time?
Then I have not used the previous day ctl (db11g_stbg.ctl) and copy it into /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your help is very appreciated.
Check "ORCL" your backup files will be present in this place.
-
DBCA cannot create the database in 12 c in Windows
Hello
After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question
It throws an error message of "Recovery Manager could not restore the data files"
I looked at the log files, here is some information:
Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4
Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data
Not sure if this helps, but I am attaching several log files to help debug the problem.
I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.
Any help is appreciated.
Thank you
Pranav
Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file
-
ColdFusion 10 - cannot create the database
I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:
Server product ColdFusion Version ColdFusion 10,282913 Edition Developer Operating system Windows Server 2008 R2 OS version 6.1 Update level /C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar Version of the Adobe driver 4.1 (build 0001) Details of the JVM
Java version 1.6.0_29 History of this server:
A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.
After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.
I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.
Error just after the attempt to create the data source:
Connection verification failed for data source: andHalt
org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."
The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."
Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to
Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action
java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)
at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)
at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)
at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)
at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)
at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)
to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."
at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)
... 13 more
Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)
... more than 10
Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.iapi.error.StandardException.newException (unknown Source)
at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)
at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)
... more than 10
= launch nested exception, level (1) =.
java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)
at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)
at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)
at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)
at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)
to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)
... 15 more
Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.iapi.error.StandardException.newException (unknown Source)
at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)
at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)
... more than 10
= end of the nested exception, level (1) =.
= launch nested exception, level (2) =.
java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)
at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)
at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)
at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)
at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)
at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)
at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)
at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)
to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)
at java.lang.Thread.run(Thread.java:662)
Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.iapi.error.StandardException.newException (unknown Source)
at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)
at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)
... more than 10
= end of the nested exception, level (2) =.
= launch nested exception, level (3) =.
ERROR XBM0A: The directory of database 'C:\ColdFusion10\cfusion\db\andHalt' exists. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.
at org.apache.derby.iapi.error.StandardException.newException (unknown Source)
at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)
to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)
at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)
at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)
at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)
to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)
at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)
at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)
at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)
at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)
to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)
at java.lang.Thread.run(Thread.java:662)
= end of the nested exception, level (3) =.
Complete cleaning action
Ah shucks! I can't believe how far from the solution I was looking for. Documentation has revealed what I had to do it even if it honestly should have probably been better treated with the best comments of the error.
http://help.Adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7FD a.html
"Note: when you add an Apache Derby Embedded data source, verify that the specified directory does not exist."
Which is a bit ridiculous given a fileOpen dialog box is provided which means just the opposite.
I came across this problem before CF 9 awhile back and I am surprised it is still hidden and I had forgotten about it.
-
create the new database in MAX
Is - this possibible to create a database on a shared network drive? I get the error message: "cannot create the database: access is denied."
I really can't understand this as...
(1) I "should" have all permissions to the drive letter, I want to put the database.
(2) the creation of a database on a "D" drive connected on the computer very well SATA works.
MAX somehow only 'know', that it is a shared network location and prevent its use?
Any help would be appreciated, I couldn't find through the help files for MAX if there is such a thing as a 'valid' for a database location.
RichA
Thanks for your suggestion, it lets me know I have recommended such configured mine. The suggestion is in alignment with how I have mine currently configured. (standby server takes over when the main server will down. used standby server only until I can get the Server primary back. and while the standby server is down, they have a tendency just to this time.)
Thanks again,
RichA
-
Script of free space for the physics of the standby database
I need to determine how much free space I have in my physical storage spaces of the standby database. Is there a query for this? Remember that dba_ views are not available in a mounted single standby database so I'm pretty well limited to using the views v$. Thank youWhy do you think you have to check the free space into a storage ensures physical ?
You cannot create all segments anyway.Kind regards
Uwe Hessehttp://uhesse.WordPress.com
-
ORA-19504: cannot create the file '+ DATA '.
Hello everyone.
This is the scenario:
We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.
For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.
I tried the simple guide that I found which is:
(1) copy the backup files cold /somedirectory
(2) start OLD database with nomount
(3) connect RMAN with OLDER as an auxiliary
(4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.
Here's the result (I deleted some lines because of the size of it):
----------------------
RMAN > ProdDB to OlderDB DUPLICATE DATABASE
2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.
3 > NOFILENAMECHECK.
4 >
From October 1, 14 Db double
content of Script memory:
{
clone of SQL 'alter system set control_files =
"+DATA/OlderDB/controlfile/current.829.859839217" comment =
' Set by RMAN "scope = spfile;
clone of SQL 'alter system set = db_name
"ProdDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"OlderDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';
change the clone database mount;
}
execution of Script memory
SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile
SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile
(...)
From restoration to 1 October 14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
channel ORA_AUX_DISK_1: restore the control file
channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03
output file name=+DATA/OlderDB/controlfile/current.829.859839217
Restoration finished in October 1, 14
mounted database
output channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
content of Script memory:
{
until the SNA 274262921.
the value of newname for datafile clone 1 again;
the value of newname for datafile clone 2 again.
the value of newname for datafile clone 3 again.
the value of newname for datafile clone 4 new ones;
the value of newname for datafile clone 5 again.
the value of newname for datafile clone 6 again.
the value of newname for datafile clone 7 again.
restoration
database clone;
}
(...)
From restoration to 1 October 14
using the ORA_AUX_DISK_1 channel
channel ORA_AUX_DISK_1: from the restore backup set data file
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA
channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA
channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
ORA-19504: cannot create the file '+ DATA '.
ORA-17502: ksfdcre:4 cannot create the file + DATA
ORA-15041: diskgroup space 'DATA' exhausted
switch to the previous backup
Oracle instance started
(...)
content of Script memory:
{
clone of SQL 'alter system set = db_name
"OlderDB" comment =
' Restore the original value by RMAN "scope = spfile;
clone of SQL 'alter system reset db_unique_name scope = spfile;
clone to stop immediately;
}
execution of Script memory
Errors in the script of the memory
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
ORA-06512: at line 1
RMAN-05556: not all data files have backups can be recovered on SNA 274262921
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014
RMAN-05501: abandonment of duplicate target database
Complete recovery manager.
------------------------------------------------------------------
The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.
First thing I took a glance was ASM occupation but it enough available space.
The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.
One have some advice on what I should look for?
Thanks in advance sorry for my English.
Select this option.
Hello.
Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.
But I solved my problem... To the auxiliary database, I added the following to the spfile:
DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?
-
Archived not getting applied to the standby database.
Hello
I turned the parameter standby_file_management to manual and since I created 3 primary data file, but they are not applied to the standby database.
I turned on the Auto setting and started the MRP process but still not able to apply archive.
Version Oracle 10.2.0.5
Please suggest,
Amit SharmaHello
Your problem is that the MRP standby automatically when a data file is added on the primary database. The reason would be that the parameter STANDBY_FILE_MANAGEMENT is set to MANUAL on the standby database.
Please refer to this http://shivanandarao-oracle.com/2012/04/02/managed-recovery-process-mrp-terminates-on-standby-database-upon-adding-datafile-on-the-primary-database/
It will be useful.
Kind regards
Shivananda -
Data file not shipped from the primary database to the standby database
Hello
(1) create a new user
(2) created a new table space and add datafile on the primary database
(3) the value tablespace default user
But so far, this new data file is not delivered on the standby database.
Version of database - 10.2.0.3
OS - Windows
Setting of primary and Standby: -.
SQL > show parameter standby_file_management;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
standby_file_management string AUTO
Both have the same file system, but the difference is case sensitive.
Primary data file location - D:\testdata
Location of file data at rest - D:\TESTDATA
Help, please.MRP process is running on the standby database?
If it is then try to pass, log on the primary database and share your result.
-
LOG_ARCHIVE_DEST_2 parameter error and cannot start the primary database
Hello
I was getting errors in my RMAN backup script. I took a glance on the database settings. Looks like I made a mistake when I was in the LOG_ARCHIVE_DEST_2 setting in the standby database. Instead of putting on the eve I put it in the name of the primary instance. I also noticed that the LOG_ARCHIVE_DEST_2 setting has been changed in the primary database where I put it first. I guess he's changed when I changed the sleep setting. I have two questions:
(1) can the parameter LOG_ARCHIVE_DEST_2 be changes for the correct setting now that I set it wrong. The reason why I ask is because when I tried to change by using the following ALTER SYSTEM command I got an error saying something about conflicting attributes. I guess it's because the name of the primary instance has been upgraded with the DB_UNIQUE_NAME instead of the name of the standby instance. If I could change the LOG_ARCHIVE_DEST_2 setting to sleep first then maybe I can change the primary to the correct setting? Please provide markets.
ALTER SYSTEM SET LOG_ARCHIVE_DEST_2 ='SERVICE = < DB PRIMARY > ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = < PRIMARY_INSTANCE > '
(2) the second question is you can start a database using a spfile? (I use ASM and Data Guard) I ask because while I was connected to the primary database I executed the following command:
ALTER SYSTEM SET LOG_ARCHIVE_DEST_2 = 'SERVICE = < PRIMARY_INSTANCE > ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = < PRIMARY_INSTANCE >' scope = spfile;
I then stop the database and try to start but it won't start because it says to conflicting attributes. I don't create a pfile from spfile file before you shut down the database. (I'm bad). How can I change the setting for the primary database to start over. (The PFILE file is different in ASM. There are sub + DATA but has only a single line indicating where is the location of the SPFILE) I need to run the following RMAN RESTORE CONTROLFILE FROM backup AUTOMATIC;
Please help as it is a production environment that was supposed to be delivered only yesterday.
Any help will be greatly appreciated!
Thanks in advance.
JI always use it. So my answer is Yes.
Please consider several of the responses of CKPT marking "useful".
He works very hard in the forum and didn't work great!
I call it "SuperStar."
Best regards
mseberg
-
Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO
Hello.
I have Toshiba Satellite C55 - A (PSCGAE).
Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.
Version 1.2.41.0 of his Studio of DTS (32/64 bit).
When I try to open this application I have error: cannot create the instance APO.
What should I do?
You need to update the audio driver (I guess that your device uses IDT HD audio card)
But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.DTS Studio seems to be already aware...
So I advise you to go to the Device Manager and uninstall its drivers Associates
After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager. -
says device cannot create the folder
have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB
It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/
Good luck, I know how much vacation photos can mean.
-
Cannot create the folder on the storage device
My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?
My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?
=====================================
The dialog box you received usually indicates that there
are too many files copied to the root directory of the
flash drive.The solution is to remove one or more pictures and
create new empty folders in their place... then move
all the photos in the files... problem solved. -
KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?
Hi dakota25,
· Did you do changes on the computer before the show?
· You are able to install other updates successfully?
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
You cannot install some programs or updates
-
I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.Is it possible to recover my files?Thank youHello
MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.
Also scan your computer for any infection by virus still present on the computer using any scanner online.
You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.
Good luck!
Maybe you are looking for
-
F20-136: MCE no sound on DVB - T signal
Hi, my Qosmio with built in digital DVB - T no sound. When I choose analog terrestrial, which means just usual 4 or 5 channels, bbc1, bbc2, itv1, ch4, ch5I only get sound and image, no problem but When I go into Setup and choose TNT digital via anten
-
Loss of sound after IDT High Definition Audio Codec update.
HP Support Assistant says that a new driver IDT HI Def Codec is available, so I downloaded and installed 6.10.6417.0, after which I have no audio output. I don't know which driver version was installed before the upgrade, but I have since downloaded
-
cannot start, don't insert the installation disc no responses
Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. change of hard disk can obtained in installation but could not
-
Windows Live Movie Maker (Vista) and .flv
Is it possible to apply my. FLV video format to WLMM? I did all convert to AVI, but the only problem is the lost quality. Everything I need to download? Thanks :)
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key. When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows A