LOG_ARCHIVE_DEST_2 parameter error and cannot start the primary database

Similar Questions

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)

• Windows Update has encountered an error and cannot display the requested...

  I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »

  Hello

  (1) what is the description which are impossible to install updates?

  I suggest to follow the steps provided and check if it helps.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614

  Hope this information is useful.

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot defragment the hard drive AND cannot start the computer in safe mode

  I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

  If you try to defragment a volume and see a message like this:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

  You can click on start, run and enter in the box:

  Chkdsk /r

  Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

  If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

• Impossible to activate the audio service with error message: "cannot start the Audio window Service.Some features will be unavailable.

  Original title: how to get audio in my system that failed for an unknown reason

  Hello... In my audio system does not... If I try to open the "manage audio devices" option in the Control Panel it opens a dialog box with the content next-' this computer cannot play audio because the Windows Audio Service is not enabled. " You want to enable the Windows Audio Service? " for which I clicked 'Yes' ." Then it displays a dialog box that contains the text next-"Could not start the window Audio Service.Some features will be unavailable".
  What is the problem and what should I do now?
  -Thanks in advance

  Hi Thennisha,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?
  2. What is the brand and model of the computer?

  Please follow the steps in the link below and check off the question:

  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

• Re-installation of operating system could not and cannot start the current operating system?

  OK to start, im using xp, I wanted to reinstall xp using the dvd I got with it. then I ran xp and has not clicked upgrade, instead I clicked on new installation. after it is finished, restart the pc and I went to the configuration screen. I went straight through and as soon as the transfer of file thingy started, he started saying missing files. Now I can't load up to new os or go on current...

  UPDATE: I don't know how to use R, the recovery thing console but I really want to format and make new ones

  UPDATE: after you press ENTER, im jumping directly to "ATTENTION: a/windows folder already exists that may contain an installation of windows." once I have press l to use the folder and delete existing, everything breaks down...

  Boot from cd of Windows XP, and then delete all partitions and then begin the installation

• Help, please! A master hard disk partition information lost and cannot start the Vista system

  I have Vista with my dell desktop computer.  I guess I got a virus that has deleted/messed my main hard drive.  All of sudden my computer was dead and when I try to restart, I found I can't boot the system.  I loaded the DVD for the resettlement of Dell to come with the computer and try to install it.  But it shows "Disk 0 unallocated space" with 222 GB and 'Disk 0 Partition 2 Recovery' with 10 GB.  I could not install Vista on the first, as it says "Windows must be installed on a partition formatted in NTFS.

  How could I solve this problem?  I could not allow me to format the drive because there a lot of data, that I just can't lose.

  Any help is very welcome!

  Marco

  http://support.Dell.com/

  Problem with the recovery process, contact Dell at the link above.

  It's recovery process from Dell, NOT Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon...

  Mick Murphy - Microsoft partner

• CARS > cannot start the DEV database on the second node after clone of PROD

  2 node RAC
  
  Example 1: DEV11
  Example 2: DEV12
  
  Database version: 10.2.0.5.0
  OS: RHEL 5.5
  
  After clone database, we can only bring to the top of the database on node 1. After the start of the database in the instance DEV11, we cannot raise the database in the instance DEV12. After the start of the database in DEV12, we cannot raise the database pending DEV11.
  
  We receive an error ORA-00600 message.
  
  SQL > startup;
  ORACLE instance started.
  
  Total System Global Area 4429185024 bytes
  Bytes of size 2102032 fixed
  1191185648 variable size bytes
  Buffers data 3221225472 bytes
  Redo buffers 14671872 bytes
  ORA-00600: internal error code, arguments: [kccsbck_first], [2], [1523689643],
  [], [], [], [], []
  
  We went through the following Notes:
  
  ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  
  Bug 2646914 : ORA-600 [KCCSBCK_FIRST], [2] IF ORACM & ORACLE has BEEN RESTARTED ON a NŒUD
  
  DIAGNOSTIC TEST:
  On the failed node, alert.log has a line which reads: "this instance was the first to climb." This is not true. The DB has been mounted on the other node.
  
  Rebound of the proceeding on the other node does not solve our problem.
  
  Ran also, what follows on both nodes, but that didn't help either.
  
  crsctl stop crs
  crsctl start crs
  
  Any advice would be appreciated... Thank you!

  See if the docs from metalink following can help you. Otherwise, please open SR with Oracle.

  1 ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  2 commissioning (editing) of 2nd instance RAC fails with ORA-00600 [kccsbck_first] [395156.1 ID]

  Thank you
  http://swervedba.WordPress.com/

• Cannot start the Foxpro Database in Windows 7

  Original title: Program compatibility Application FOXPRO DATABASE Applications DOES not START in WINDOWS 7

  Our old file server (WINDOWS NT) of death and been replaced by a WINDOWS 7 computer with networks of peer-to-peer simple to other laptops and PC Office who are all happily run a mix of VISTA and XP.

  Our database of professional records main office (addresses, dates, WHO, etc.) is a FOXPRO database, we have developed 12 to 15 years ago.

  Its solid fully confined, robust and will happily work straight off a USB drive in a VISTA, XP, 2000, 98,95 powered by computer etc etc.

  He always works with happiness on our peripheral computers but just won't run on the new principal.

  We are not trying to network... but would like to have work on the WINDOWS 7 computer that is my one my Secretary prefer.

  Thanks for any help

  Hi Ken,

  The question you posted would be better suited to the MSDN Community. See the link.
  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

  Hope this information is useful.

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support