Cannot create User.xml with weblogicExportMetadata.sh in IOM 11 GR 2

Similar Questions

• Why we cannot create a folder with the name con

  Hello Sir,

  I wan't to know the reason for why we cannot create or rename a folder with the name "con" as the other folder names. But I know that we can create this type of file using cmd.
  Thank you.
  Mihir Mani prasad

  CON is a reserved word and cannot normally be used as a folder name.  This also applies to: PRN, to THE, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, and LPT9.

• IOM Provisioning - OID Create User fails with a weird error

  Hello
  
  I have the auto layout installation service using access policies, the user is to created in IOM, then he's trying to delivery to the OID.
  
  I get the following error while trying to create the user in the OID. The "Create a user" task is rejected status with the error "Could not create user".
  
  
  DEBUG, December 6, 2010 14:07:33, 573, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: getMultiValues(): COMPLETED
  DEBUG, December 6, 2010 14:07:33, 574, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: escapeCharactersDN(): STARTED
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. Election of OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) with the code: USER_CREATION_FAILED
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: disconnectLDAP(): STARTED
  
  
  
  I mentioned the following post:
  
  IOM - OID Direct Provisioning of users newly created via the err access policy
  
  Mistakes are similar, but it seems that in my case the container DN is updated using the adapters to prepopulate.
  
  Any ideas to fix it?
  
  Concerning
  Vijay Colin

  I would recommend to sniff the connection (http://iamreflections.blogspot.com/2010/08/how-i-learned-to-stop-worring-and-love.html) or decompile the connector.

  Newspapers are not very useful.

  Best regards
  / Martin

• Documentation on creating user interface (with Javascript and / or Flash)

  Hello

  so far I use JavaScript to create my own UI, something like

  funky var = new window ("dialog", "window title ', [100,100,300,200]");
  DWIN.okButton = Dwin.add ('button', [150,70,190,90], 'OK', {name: 'ok'});
  DWIN.myText = Dwin.add ('edittext', [10,10,190,30], ' mytext' ");

  ... and so on.

  I've put together some of the pieces on the use of this 'New Window()' thing here and there, but what Miss me is something like official documentation on these orders. The official Adobe documentation does not include this information, so where can I find it?

  Moreover, I am looking for information on the generation of the user interface with Flash, but aside from one (fairly complex) example that is in the folder "Sample Scripts" of my installation, I couldn't find anything.

  So, where can I get this information? I use CS5 on Windows 7 (64-bit)

  See you soon

  BLIK

  Dox:

  C:\Program Files (x 86) \Adobe\Adobe Utilities - tools toolbox CS5\SDK\JavaScript CS5\ExtendScript guide CS5.pdf

• Create an XML with AS3 object

  I want to create an XML object based in AS3, but don't know how to do this.
  
  I first tried to create a string that represents my XML elements and their values, but then I don't know how to convert this string into an XML object.
  
  Secondly, in my view, there are other ways to create XML objects in AS without doing anything with strings.
  
  Can someone please recommend a way to do this?
  
  An example XML to create with AS3 is:
  

  I got the solution to my problem. For anyone interested, see me the code below (the names of xml elements are different, but the concept is the same).

• Cannot create users/groups/associations of OAM

  I created a user admin [oamadmin] in Sun One Directory Server and configured the user admin administrator during the initial Setup/configuration. When I go to the Console of the system identity, I can see the Sun One Directory Server users. When I tried to create a user, group or organization, I see the error message
  
  "You don't have sufficient access rights.
  
  Is that all that I'm missing? What I should I adjust if I need to create users, groups and organizations of Console identity system? I have included the [oamadmin] admin user in the Administrators group of the directory in the directory server.

  You create a workflow that creates the user, group,... and make the current recorded in user (your admin in this case) the initiator of the workflow
  For more details, check the identity and the section of common administration 5 - chaining of actions of identity in workflows

• Cannot create users more? : S

  Hi guys,.

  Not to mention that I connect with a user from the administrator to the EAS Essbase options as create, copy, or delete users are now disabled, but they have been activated before. Is it possible that I'm missing something?

  I thought it was as simple as following the instructions described on the Essbase Administration Services online help

  Any help would be appreciated! See you soon!

  Moreover, that's what I try to explain:

  http://s24.postimg.org/n5qb0h4z9/Essbase_01.jpg

  * Note: The user is associated with options are disabled *.

  You have shared Services? Someone sign it with Shared Services?

  Check if AuthenticationModule CSS is enabled in Essbase Server-> properties-> environment

  Concerning

  Celvin

  http://www.orahyplabs.com

• Cannot create PDF files with adobe acrobat 8 professional on windows 7

  I ran acrobat 8 Professional on Windows 7 64 bit. I can only create PDF files when you are logged on as administrator. I tried to add the user to the Administrators group, but still have the same problem. The system locks just after adobe promts me to the name of the file, I provided file name, click on save and it crashes when displaying the "" print message "»

  Any ideas?

  Thank you

  Fernando

  Acrobat 8 Pro is not compatible with Win 7 - especially for the creation of PDF files.

• CANNOT CREATE A REPORT WITH A QUERY PAGE

  Hello everyone,

  I have this query with a self-join:

  \

  Select flight_id, f.pilot_id, last_name, f.pla_id, pla_desc, city_dep, d.city_name, city_arr, a.city_name, dep_time, arr_time

  pilots of flight f, p, pl, city, city of the plane a

  where f.pilot_id = p.pilot_id

  and f.pla_id = pl.pla_id

  and city_dep = d.city_id

  and city_arr = a.city_id

  order of flight_id;

  \

  I've created a classic report based on a table, first of all, then I'm trying to modify the SQL query to the above and I get this error:

  Error in saving of the column's settings.

  ORA-20001: your query contains alias duplicate names, the queries used for reports require unique alias names.

  
  

  What I am doing wrong? How can I build a rapport with a form based on a request like this?

  
  

  Thank you!
  

  The column Francisco appears twice - you'll need to use aliases for columns, for example:

  d.city_name as dep_name

  a.city_name as arr_name

• HP ProLiant DL160 - cannot create the data with local storage (controller, no RAID) store

  Hi all. I appreciate your time and comments.

  Using VMware ESXi (initially), installation (VMware ESXi 5.5.0, 1331820) will very well (install on USB). Able to enter in the console of the vSphere Client, everything seems normal. Any attempt to use local storage, however, is filled with this error message: http://i.imgur.com/40ySsOS.png

  "It was not correct to specified parameters. Vim.Host.DiskPartitionInfo.spec"-" 'HostStorageSystem.ComputerDiskPartitionInfo' call for object 'storage system' on ESXi "< ip address >" failed. "

  I tried both the base (from VMware) installation disc and the "Custom" (HP) HP installation disk. Both have the same problem: all facilities, but local disks - as seen while - are not able to serve local storage. It worked very well (previous incarnation was as Server 2003 file server, no reported\noticed questions). It's not under warranty, its going to be used as a laboratory server. All this seems to work well.

  Specifics:

  HP DL160 G6

  Storage card: ICH10 6 Port SATA AHCI Controller

  Discs: 3 G MDL 500 GB 7200

  Controller and the disks are perceived by the system: http://i.imgur.com/3PAKQHL.png

  Can someone point me in the right direction on what to go here? Research on the error messages do not lead to a lot of help. I'll get more pending. I would be grateful.

  This could be a problem with the current data on the disk. I suggest clean you the partition info using the DD explained to the KB VMware: Troubleshooting in the add storage Wizard error: cannot read this disk partition information to see if that solves the problem.

  André

• Cannot create a VMDK with a size greater than 600 GB on NFS storage

  Hi guys,.

  My institutes use for vSphere, ESXi 4.1U2 with vCenter 4.1 with the based BlueArc storage NFS. Recently, I tried to create a virtual machine with a 900 GB drive. But the operation could not say there is Error Input/ouput. Of the hostd.log, I found:

  ~ # cat /var/log/vmware/hostd.log | grep gagri
  snapshotDirectory = "[gagri_10G_VMPool01]"
  [05-11-2012 14:27:07.431 21F40B90 info 'VmDiskMgr' opID = D2819F21-0003B52F-30] For drive [gagri_10G_VMPool01] new Machine virtual/New Virtual Machine.vmdk, disc creation error: input/output error

  I did several tests and found that any less than 600 GB size is fine.

  Later, I SSH to the ESXi host directly and tried to created a 900 GB VMDK via vmkfstools, surprisingly, it is created without error.

  So I was wondering if there is a bug with vCenter?

  Kind regards

  Derrick

  With ESXi 4.1 Update1, we have a fix for the creation of 1 TB of VMDK on NFS. Maybe you can check the setting below if it helps

  Creation of large hard on NFS files may fail
  When you create a virtual disk (filehard ) with a large size, for example, more than 1 TB, NFS storage, the creation process may fail with an error: a general error has occurred: unable to create the disc: the disc creation error. This problem occurs when the NFS client does not wait for enough time for the storage array NFS to initialize the virtual disk after that the NFS client RPC parameter is to expire. By default the time-out value is 10 seconds. This hotfix provides the configuration option to set the RPC timeout setting using the esxcfg-advcfg- s/NFS/SetAttrRPCTimeout command.

• Creating object XML with namespaces

  I am trying to create the following XML
  "< xs: Schema id ="MySchema"xmlns: XS =' http://www.w3.org/2001/XMLSchema' xmlns:msdata ='urn: schemas-microsoft-com: xml-msdata" >
  < xs: element name = "Monschema" msdata:IsDataSet = "true" msdata:UseCurrentLocale = "true" / >
  < / xs: Schema >
  
  Following the documentation, it seems that the following code should do the trick
  
  private const xs:Namespace = new Namespace (" http://www.w3.org/2001/XMLSchema" "");
  private const msdata:Namespace = new Namespace("urn:schemas-microsoft-com:xml-msdata");
  
  var testXml:XML = < schema > < / schema >;
  testXml.addNamespace (xs);
  testXml.addNamespace (msdata);
  testXml.@id = "Monschema";
  testXml.xs::element.@name = "Monschema";
  testXml.element.@msdata::IsDataSet = true;
  testXml.element.@msdata::UseCurrentLocale = true;
  
  However, this translates into the following XML
  < schema id = "PERSONDETAILS" >
  "< element name ="PERSONDETAILS"xmlns =" http://www.w3.org/2001/XMLSchema "/ > "
  < item IsDataSet = "true" UseCurrentLocale = "true" xmlns = "urn: schemas-microsoft-com: xml-msdata" / >
  < / schema >
  
  Can someone tell me what I am doing wrong? Thank you

  Had, it seems to work...

  "var testXml:XML = http://www.w3.org/2001/XMLSchema' xmlns:msdata ='urn: schemas-microsoft-com: xml-msdata" >;
  testXml.@id = "Monschema";
  testXml.xs::element.@name = "Monschema";
  testXml.element.@msdata::IsDataSet = true;
  testXml.element.@msdata::UseCurrentLocale = true;

• Cannot create the file with EclipsePlugin .cod

  Hello

  I don't know how to describe it. I installed Eclipse plugin, JDE 4.5.0_4.5.0.16 and then updated to JDE plugin 4.7.0_4.7.0.46 (because I need the latest JDE packages so I can use ApplicationIndicator).

  But now when I'm trying to compile or create a .cod file (Eclipse: Project / Build active Configuration of BlackBerry) I get this error message:

  Executing rapc for the project BirthdayReminder at Mon Jun 08 09:28:07 CEST 2009.
  C:\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\launcher.exe C:\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\rapc.exe  -quiet import=..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar;..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\lib\net_rim_api.jar codename=..\BirthdayReminder\BirthdayReminder ..\BirthdayReminder\BirthdayReminder.rapc -sourceroot="C:\Dokumente und Einstellungen\xxx\workspace\BirthdayReminder\src" "C:\Dokumente und Einstellungen\xxx\workspace\BirthdayReminder\bin"
  ..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\lib\net_rim_api.jar(net_rim_bb_addressbook.cod): Error!: Duplicate definition for 'net.rim.device.apps.api.addressbook.AddToAddressBookContext' found in: ..\..\..\..\Programme\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar(net_rim_bb_addressbook.cod)
  rapc failed for the project BirthdayReminder
  

  I don't know how to fix this... Why are there at - it a method definition duplated in the container of the RIM?

  I'm sorry - I solved it this problem for me.

  After update eclipse to 4.7.0.46, you need to uninstall the 4.5.0.16 package caraa. After a restart of eclipse, the new 4.7.0.46 package will be selected for the compilation and no error will be thrown.

  

• Cannot create the VPN with partner

  Our Organization is trying to upgrade the equipment we use to establish a VPN connection with our partner.

  The old material is a Cisco 2811 router (OldCore) and the new is a 4431 (NewCore) from Cisco.

  The partner uses a Sonicwall device at the other end for the vpn connection. The VPN between the OldCore and the Sonicwall device works fine. However, when we are trying to replace the OldCore by the NewCore, the VPN connection does not come to the top. I checked the settings and they are all the same for OldCore and NewCore. Partner says that they have configured anything on their end that could cause this problem.

  result of "sh cry isa his"the NewCore wrote.

  IPv4 Crypto ISAKMP Security Association
  DST CBC conn-State id
  XX.xx.xx.xx yy.yy.yy.yy MM_NO_STATE ACTIVE 0
  XX.xx.xx.xx yy.yy.yy.yy MM_NO_STATE ACTIVE 0 (deleted)

  When I disconnect NewCore and replace it with the OldCore, the vpn connection comes back up without any problem.

  A strange thing is that I can ping the public ip of the partner OldCore (public interface) device form but not of NewCore (public interface). However, I can ping the public ip address of the inside interface of NewCore associated device form.

  Someone had this problem? How did you solve this problem?

  Hello

  You might want to consider configuring NAT to the new kernel. You can also run suite debugs as he tried to set up the new router tunnel of kernel by sending valuable traffic to the VPN.

  debug the cond cry counterpart ipv4

  debugging cry isa

  debugging ips cry

  When debugging is collected, type "undebug all.

  HTH

  Averroès.

• Cannot create folders shared with VMware Fusion Pro 8

  Just updated to VMware Fusion Pro 8 and having problems of shared folders. Although the Win 7 Pro system is the area of our society, he is unable to see other computers (apart from himself) on the network. I am also unable to share folders the with the Mac OS. I followed the instructions a few times below and failed to make it work:

  Windows

  To configure a shared folder in a Windows virtual machine:

  1 launch VMware Fusion.

  2. turn on the virtual machine.

  3 click on Virtual Machine > settings.

  4. click on sharing.

  5 in Fusion 7.x, select enable shared folders. Molten 6.x, 5.x, 4.x turn files option ON the Shared. In Fusion 3.x, select shared folders on your Mac option.

  6. click on the button +.

  7 navigate to the folder on the Mac which will be shared with the virtual machine and click Add.

  Shared folders are accessible via the shared folders shortcut on the Windows desktop or the network Z: drive VMware.

  Does anyone know how to fix this?

  Thank you!

  Looks like it was too easy to install "VMware Tools". Seems to work now.