Cannot cross the installation window.  Where is the actual program?

Similar Questions

• Do not open the video file with the error "the file you download cannot open the default program".

  By double clicking on a file video I now get the following message "the file you download cannot open the default program" while previously he opened the file. This occurred after using Microsoft Fix - it for trial purposes, so what has changed.

  Original title: this message is received when I try to open a file by clicking twice - the file you download cannot open the default program

  Hello

  1. Are you dealing with the issue is with the opening of specific or all video files video files?
  2. What is the name of Microsoft fixit are you referring to?

  Set by default to read video files and verify if works.

  Change the programs that Windows uses by default:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  It will be useful.

• Downloaded Acrobat Reader - Widows 7 OS.  Adobe has taken over several of my desktop/start menu icons.   Adobe, I cannot open the original programs.

  Downloaded Acrobat Reader - Widows 7 OS.  Adobe has taken over several of my desktop/start menu icons.   Adobe, I cannot open the original programs.

  This can be useful: Application, file icons change in Acrobat/Reader icon

• Cannot open file because Windows needs to know what program created the file

  After downloading some files when I try to open the file, I get the message cannot open the file, windows needs to know what program created the file.

  Any suggestions?

  Perhaps no program has been assigned to this file format and so you cannot open these files.
  I put t know which files you downloaded, but you can choose an application installed that can open these files.

  Right click the file and I have to then choose open with.
  Then, you could choose the program you want to use.

  Best regards

• Cannot delete the 'Knctr' program in Windows XP

  Hello, I am a representative of customer service with a number on the behalf of the client. The customer wants to remove the "Knctr" program in Windows XP from the Control Panel, but he kept getting this error:

  "HE SAID THAT SOME OF THE PROGRAM IS RUNNING AND I HAVE TO CLOSE THE PROGRAM BEFORE IT CAN BE DELETED.".

  When the client closes the program and tried to delete again, he received the same error message. Please advise on how to make this problem is resolved. Thank you.

  You posted in Windows XP} programs, so I'll assume that your client is the one with Windows XP.

  In the system area right of the task bar, please a KNCTR icon. Right-click and select stop. You should now be able to go to the XP of the Panel Add / Remove Programs and uninstall.

  Uninstall KNCTR

• Cannot uninstall the old program, reinstall, or remove the folder

  I bought this home edition of XP used from Lady in my building.  His father-in-law was.  It has the older version of mozilla firefox here since 2009.  In the Panel of control-add/remove programs-it will not uninstall.  I tried to click the icon for it and it will not open.  I tried to delete the file and receive error message: access is denied.  I went on the site and can not download the latest version either.  What should I do now?  It does not close also.  It restarts after said save setttings and stop.

  You bought a computer with a preinstalled operating system or just the OS and put it on a computer that you have ever had?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Flash Builder on Mac Lion 10.7.5 4.6: cannot run the Setup program: certificate revoked

  Hello

  You are aware that FB 4.6 is not install more OS x 10.7.5 and maybe OS X in general?

  Because I really need design view last FB does not offer, I just downloaded 4.6 FB for OS X from Adobe: Adobe - Adobe Flash Builder 4: for Macintosh: Flash Builder 4.6 - Mac OS: thanks

  My real OS X is 10.7.5, Lion.

  Launch of the install.app, it appears an error window:

  

  Please be aware that I know that this message comes from Gatekeeper, see for example: OS X: on Gatekeeper

  The fact is that this problem is not solvable, apparently.

  The problem is with the application signing certificate, as you can see issuing the command:

  bash - 3.2 # spctl - has Install.app

  Install.app: CSSMERR_TP_CERT_REVOKED

  So, here we have a certificate of _revoked_, not a certificate/developer unknown or app unsigned.

  Indeed, unfortunately the problem persists even disabling Gatekeeper:

  bash - 3.2 # spctl - status

  co-pays disabled

  since apparently a revoked certificate is not an error that can be ignored or circumvented somehow.

  As far as I KNOW, the idea behind this is: Apple actually provide no verification quality on applications (they are not "approved by") but may possibly (if there are "problems") block a via the recall mechanism. Because of this, the _revoked? _ check cannot be bypassed/disabled. I'll try as soon as POSSIBLE an upgrade of the OS to see if with the Mountain Lion (10.8) I can possibly force execution Install.app, but chances appear to be rare so far.

  So, Adobe, can you help me please?

  Maybe sign with a certificate valid for this installer...

  FB4.6 is essential because it is the last version with DV. I had to install FB46 on Windows to keep working, but it's no doubt slow me down as everything is on Mac.

  ARO

  a pro developer.

  Hello all, good news: after updating to 10.8.5, Mountain Lion I was able to run the Setup program and all went well.

  Mountain lion allows the user force execution through the command open context menu (CTRL-click) and it works, just as simple as that.

  So my advice is: If you want to install or reinstall Flash Builder 4.6 on a Mac with Lion installed, updated to Mountain Lion or better to avoid problems.

  Apple introduced some (not all) Gatekeeper 10.7.3 and following features, but apparently you need a full-fledged 10.8 to also have what you need to work around a revoked certificate error.

  Since usually OS X has auto update active, if you run Lion you find with 10.7.5 and do not install FB46. If you manage to somehow hold 10.7.2 I guess you should be able to install FB46, sincerely I don't check it out. In any case, it is simpler and safer to move to 10.8.x.

  Good bye

• Cannot locate the downloaded programs - that I thought was deleted, but make their appearance during a scan

  I spent my Toshiba Satellite laptop, running Windows Vista Home Edition Premium, I was cleaning up unused programs and unnecessary files.  I noticed that when I run a scan, a number of files that I thought was deleted see the upward in the analysis.  Files appear too fast for me to read their locations and are not in the program files.  I tried to use the windows Explorer search, but I don't have the files correct names.  I went through all the files I could think on my hard drive manually.  They are large files and I want to delete to free up memory.  Where else a downloaded program would be if not in 'Downloads' or 'Programs' files?  Help!

  Hello

  If the files have been downloaded using Open instead of save or save as, the file can still be in temporary files. You try to use Disk Cleanup to delete temporary files and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-disk-cleanup

• Cannot change the default program for opening .dll

  For some reason any, since I first linked the default program to open files .dll with Visual C++ 2010 Express (which is not truly attempt open, but instead of it gave me a message somewhere near the lines of "File not supported - Type does not open", incidentally) by chance I could not change since. I took a screenshot of the dialog box to try to change (URL below after all), but I noticed that the box was grayed out (the theme I have is a modified version of the classic Windows theme, but on 7, to clarify the operating system). I also tried to select a file after having hit the "Browse" button, but it didn't open anything. I tried several programs in the present to open, much less to change the default value (these are two notable examples): Netbeans - primarily an IDE for Java, but can open binary files even if she's not actually modify them (note: I changed absolutely nothing on any of them even if I has modified it to make it the default program but this problem affects more than just the ones) (, and it did not start until the last default) and Notepad. I went through the 'Open with' dialog box, and this is where I first encountered the problem of it (described above) outside the Control Panel, which it wouldn't let me change the association of file of it in particular, even if I didn't have one of these questions with any other type of file I tried to change, before or after this madness.

  https://docs.Google.com/file/d/0B02h60r9WvJrZ1E5R01xZzJ4akU/edit?USP=sharing

  Hello

  I suggest that you try to restore the system to an earlier point before the issue started and check if it helps.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Cannot change the default program

  1 HP Pavilion dv6

  2 Windows 7

  3. "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  4. Windows update itself

  5. I was always able to change the default program, until Windows has created an another update (which still live with my settings).

  When I right click > Open with > choose by default the program give me this vague and frustrating error message indicating 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This is a load of ponyfeathers, because I am the only user and administrator of my laptop. I tried also to the solutions, but the error is apparently used in multiple areas of screw - rises of Windows. This error applies to all files.

  I am still able to go to administrative tools and change the defaults from there, but I'm not THAT tech savvy and I don't like playing with the pieces dark and deep programming from my laptop.

  Hello

  Restore the system to the point before you install this update from the Windows Update.

  Resources:

  How to do a system restore in Windows 7

  I recommend you to change the default setting for Windows Update:

  Open the Control Panel (Display icon)and click the Windows Update icon.

  In the blue left pane, click the change settings link.

  Changing current configuration in ' updates ' on ' check the updates but let me choose whether to download and install them. '.

  Resources that I think that will be very useful for you:

  Hide the Windows 7 updates that you don ' t Want never to install

  How to uninstall a Windows Update in Windows 7

• cannot find the folder "program data".

  original title: New Data - Program for Windows 7

  I just bought a new computer with windows 7.  I am trying to install programs, for example, installing a program to C:\program data\Quantum.  I go to 'my computer' and can not find the folder "program data".  Is it possible that windows is hide it?

  Sandy

  Hi Sandy

  The program data file replaced the all users in previous versions of Windows.

  Open Windows Explorer. Click on organize / folders and Search Options / View tab.

  Select the option Show hidden files, folders and drives, and then click apply/OK.

  Navigate to C:\Users. In this folder, you will see a folder named all users with a shortcut arrow or the layering of padlock. It is a symlink pointing to the ProgramData folder. Right-click on the folder and select properties to see this data.

  Your programs are not currently installed just for the ProgramData folder. This folder is used to allow any user (for all users) access to an installed program that allows any user to operate this program.

  Many times, when you install a program, you will see an option to install the program for the current user only, or to install for all users.

  Another way, you can see it is to click on the Start button, right-click on all programs, and select open all users. This will open Windows Explorer to the

  C:\ProgramData\Microsoft\Windows\Start Menu folder.

  Let us know if you have any other questions.

  Concerning

• Cannot change the default program to open certain types of files more

  I opened the month .package file type by using a specific .exe designed to cope.  I got this morning and by clicking on a .package file brought to the top of the screen "choose default program".  I chose the appropriate program, but it does not appear in the screen of the recommended program, and I can't find any way to make it use the default .exe.   I tried to change it in the area of selection of the programs in the the control panel by default and hot at the same result.  I can still open the files by starting the program manually and choosing the option 'Open', but it is a tedious and repetitive task!  This program is used to group graphic files in a specific format, and it is not uncommon to open and close files .package 5 6 times in a period of 10 minutes.  I really need to fix this ASAP.  My productivity has come to a near standstill.

  I'm on Win7 64-bit, the program in question is a stand-alone that has always been in its own folder in the downloads library.  I tried to move to the folder program files (x 86), but that did not help.  Windows recognizes the program when I make the request to select the default program.  When I try to use it however, it is not an option.

  I was going to link to the Microsoft Developer Network instructions, but it's a pretty large amount of information for it, so, let me suggest a small program that should be able to do it for you.

  http://types.sourceforge.NET/

• Error "the system cannot execute the specified program."

  Hello

  I downloaded Oracle Golden Gate on a box of Windows Server and I got the following error when I run:

  Microsoft Windows [Version 5.2.3790]

  C:\Documents and Settings\Administrateur > cd\

  C:\ > ogg cd

  C:\ogg > ggsci

  The system can not run the specified program .

  Here are the specifications of the environment:

  • Windows Server 2003 x 64 SP2 Enterprise
  • Oracle GoldenGate V11.2.1.0.1 for Oracle 11 g 64 bit on Windows 2003 (64-bit)
  • Microsoft Visual C++ 2005 Redist (x 64) installed
  • Logged on as a local administrator

  
  

  Proof that we have 64 - bit Gg:

  C:\ogg > c:\WINDOWS\system32\Exe64bitDetector.exe f c:\ogg\ggsci.exe

  ****************************************************************

  EXE 64 bit detector v1.0 by SecurityXploded

  http://securityxploded.com/exe-64bit-detector.php

  ***************************************************************

  Path of the file: C:\ogg\ggsci.exe

  File type: 64-bit

  Final note, when I installed the 32-bit version of the Golden Gate, it has worked well. But of course, he couldn't see the Oracle database software, because he was of 64-bit.

  Any hint is appreciated.

  The problem is resolved after you apply an update to security on VC 2005 from following link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14431

• Icons/programs on the desktop will not open the actual program

  Whenever I click on an icon/program such as Internet explorer in my desktop, it automatically opens windows media center!  Each program, on that I click open windows media center!  How can I fix?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Cannot cross the window user account controls

  When I download Firefox on Windows 8, I can't go past the control window user account. I answered Yes and no. It shows Firefox in my downloads, but it doesn't start. Any ideas?

  The downloaded file contained the word "stub" in its name? This Setup needs to connect to the Internet to download additional files, which may get blocked. You could try the 'full' Downloader instead. Scroll to your language:

  https://www.Mozilla.org/Firefox/all/