Cannot decompress web complete sample application catalog because too long file name.

Similar Questions

• Cannot delete files with long file names in Windows 7

  Unnecessary Windows 7 will not erase a file whose name is too long. I have no name, it is in a temporary folder of IE. I can't get rid of it as options to rename will not be visible.

  Thanks, but I have solved the problem. The error message was about 'file path or destination file name is too long. It is the backup to the temporary internet file that was causing a problem: he made the PATH too long as she added additional elements on the path. That was simply solved by the path to 2 bits, (path upper and lower file path) to cut and remove separately.

  When I tried to delete the .jpg image with the extremely long filename at the end of the long path he says as the destination folder (ie the TRASH) could not hold the file due to excessive length. It's confusing to say the least.

  Anyway that little trash has bit the dust.

• Cannot find filename when looking for a part of the file name.

  I'm just trying to do a simple search.  I have a few hundred files in a number of subfolders and above I'm looking for right in the file name (in the upper right corner of the browser) and he doesn't find anything.  This is getting very, very frustrating.  It seems to randomly find some files... but no more.

  Is there some settiing I need to change?  What is the problem?

  Well - I thought of her.  Despite light in several places that the 7 search automatically applies a generic search at both ends of your criteria, is not.  So, let's say that I was looking for the file name "aaaxyzbbb.txt"... the search for "xyz" found nothing.  But "* xyz" found what I was looking for...

• HFM: Sample Applications

  Do you know where I can the instructions on how to load the sample applications?
  
  
  Because it says on the hfm_admin pdf document that:
  
  Instructions to load the example files are
  included in the Documentation for each application folder.
  
  
  someone know where can I find the instructions?
  
  Thanks in advance
  Hanson

  The instructions will be in your home directory HYPERIONHOME\APP\Sample Apps\.

  Go on your financial management server change into this directory, and there is a .doc file in a directory of Documentation.

  For example: D:\Hyperion\FinancialManagement\Sample Apps\Comma\Documentation

  Good luck

  -John

• Try to restore a lost Thunderbird profile, but can't "move profile" because the file names are too long

  I'm having a problem with Thunderbird that is addressed in several comments here and on "mozillaZine", but trying to follow the instructions for fixing it, I ran into a new problem that I see not addressed. The initial problem is that described in this thread, where my files and everything just disappeared, and I am invited to start to create a new profile:

  https://support.Mozilla.org/en-us/questions/1040003

  Following the links in this thread, I get to this - and since my address book has also apparently gone, I click the internal link to the section titled 'Lost profile':

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  Step 1 then sent me here:

  http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

  Step 2 on this page says: "Copy the profile folder where you want to store." When I try to do it, however (using Windows Explorer on Windows 7), he gets to halfway through the copy and then hang up because it clashes with a file name that is too long to copy. And according to the prompt that tells me this, there are many more yet to come long file names.

  Ignore this error and I just ignore these files? That means the copy of profile won't be complete, which I think would be dangerous or would just cause other errors. Or is there some simpler way quite do what I originally planned to do, which is to recover the profile which has mysteriously disappeared?

  Again, I'm under Thunderbird on Windows 7 and it was used for years without ever encountering this extremely irritating glitch. I'll be grateful for any help.

  Here are three different approaches, I suggest:

  1 see https://support.mozilla.org/en-US/kb/using-multiple-profiles and see if you can switch to that you want to use the Profile Manager.

  2. While TB is NOT running, use a prompt with the following commands: Note: place the entire path in quotation marks.

  • CD "the full path of your current profile directory name '.
  • xcopy "the full path of your"good"profile name" / s/h
  • now check with the Windows Explorer, and switch to him as above

  3 change "profiles.ini" (using a text editor such as Notepad) to point to the profile 'good '. "profiles.ini" looks like this:

  [General]
  StartWithLastProfile = 1

  [Profile0]
  Name = default
  IsRelative = 1 * change this to 0 *.
  Path = yt20rg5n.default * change this to the path and the name of your profile of "good."
  Default = 1

  Let me know how it turns out.

• Cannot install the sample applications manually

  Hello

  I'm having a time difficult installation SDK push sample applications on a remote computer. I try a manual install of Tomcat. The machine runs on Linux Red Hat.

  The error I get is:

  [org.springframework.web.context.ContextLoader.initWebApplicationContext()] - Context initialization failed
  org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registerListeners' defined in class path resource [sample-push-initiator-context.xml]: Invocation of init method failed; nested exception is org.springframework.transaction.CannotCreateTransactionException: Could not open JDBC Connection for transaction; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure
  
  The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)
  

  It looks like a problem with the JDBC connector, but I do not know how to solve. Among the things that I've done are:

  • Generate the database manually.
  • Fill the PushSDK.properties with the database and JDBC information. Copy this file in each directory WEB-INF/classes of applications examples of
  • Copy the mysql connector jar file in the directory WEB-INF/lib of each application
  • Edit the file app.properties with the information from my BB (app id, base url PGG etc.). Copied in the directory WEB-INF/classes of applications. I did the same thing with suspension - context.xml and app - context.xml
  • Edit conf/server.xml of Tomcat to set the http and https ports and the UTF-8 encoding for the request URL query component. In fact, I have only port 8080 available in the machine and I have configured HTTPS to work.
  • A self-signed certificate and shows its location in the conf/server.xml file. Indicates its location in conf/server.xml
  • Edit bin/catalina.sh to set the JAVA_OPTS UTF-8 encoding

  The initial Tomcat page seem to be working in https://machine_ip:8080.

  But there are errors with the BB apps:

  • https://machine_ip:8080 / sample-push-initiator returns 404
  • https://machine_ip:8080 / pushsdk returns 404
  • https://machine_ip:8080 / debug-Portal opens the Debug Portal, but displays the following message:

  Internal Server Error: 
  
  Sorry, we are unable to properly process your request at this time. Please contact a system administrator to investigate the problem by examining the logs.
  

  Does anyone have an idea of what's going on? I would be very help appretiate

  Best regards

  Maria

  Hi all!

  Finally, I could solve this problem. MySQL was not allowing the JDBC connection. I have

  delete the line:

  skip-networking
  

  in MySQL configuration file (/ etc/my.cnf) and now the sample applications seem to work ok.

  I still cannot subscribe to the good customer, but that's another story...

  Kind regards

  Maria

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Lightroom cannot use the catalog because it is not writable and cannot be opened

  My catalog is on an external hard drive and I lost the connection, resulting in an error message "Lightroom can't use the catalog because it is not writable and cannot be opened" to come.

  There was no lock file to delete, and I deleted the log file. All write permissions have been verified on the hard disk, catalog and subfolders and I leave and I always get this error message.

  How can I get rid of this message and gain access to my catalog again?

  I'm on windows and not Mac. Thank you for your time, but I have already contacted Adobe via a chat service and the catalog has been corrupted. They fixed. Thanks again for your time.

• Cannot deploy the sample applications of the MAF

  I try to install some of the sample applications on the MAF ( jdev_install/jdeveloper/jdev/extensions/oracle.maf/Samples Directory) on my Android (version 4.4.2) phone without success.

  I use jDev build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

  If I have a deployment on an Android package using default deployment profiles, I get the following error:

  "Impossible to deploy the profile because the project 'ViewController.jpr' is not a MAF ApplicationController or ViewController project. (oracle.adfmf.framework.dt.deploy.features.deployers.FeatureArchiveDeployer).

  I searched this error in this forum and found this:

  MAF: Build Error "adfmf - not found feature.xml.

  Then I updated the patch of the MAF, and I still get the same error.

  I then fiddled around a bit dependencies of properties/deployment/Android1/Application Profile

  Now I can deploy on my phone, but the application hangs on the splash screen.  Can anyone advise on what things should be checked in the profile dependencies?

  

  OK, I finally understood what is the question.

  After installing the patch of the MAF, jDev so ask to restart your computer, but for some reason any on my computer this can last from a few minutes to a few days!  The first time that I installed the patch, after a reboot, through the Assistant jDev update request I clicked on OK and jDev stop and waited so he could restart. 5 minutes later, it started so I thought I'd launch myself, so I did.  But what I didn't know that in my list of system processes, jDev was still working (perhaps even install the patch).  Here's a screenshot of my system process (that I took during my third attempt, since I suspect something):

  

  Thus, while this process jDev was hanging out, I started jDev myself and ended up having two jDev processes running.  One that I started manually didn't have the MAF Patch applied, but I thought he did it because I just went through the Update Wizard.

  And so all the trouble, I have tried to deploy the sample applications of the MAF.

  I didn't knew that this much later because a few days later, a splash jDev screen suddenly arisen WHILE I was USING jDev, I knew was because the first time, install the patch jDev prompted to restart the computer.

  Only on the third time reinstall jDev and the patch of the MAF has waited more jDev to restart, and when he finally did restart on its own (3 minutes later) that I checked my installation of the fix for the MAF and found that it was installing successfully.

  I then tried to deploy the sample applications of the MAF again and this time it worked.

  So, in summary, because he took if jDev long reboot after installation of the patch of the CRG, I advanced and started jDev myself, but this instance of jDev, I started upward has not installed the fix of the MAF, and so the trouble I had to deploy the samples of the MAF.

  I hope that something can be improved here so that other users the same tracks as I do not work in the same problems in the future.  It can be as simple as a message before reboot in saying the user to wait jDev restart on its own, otherwise their patch will not install.

  Thanks for your time.

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• 5.7 Lightroom on Windows 7 64 bit home says that it cannot open the catalog because it is not writable or is in use, but it is writable and is not in use.

  I just reinstalled and all my Lightroom stuff is in a single folder. So I simply pointed out Lightroom in the folder once it has been reinstalled, but I get this message saying 'Lightroom cannot use the catalog because it is not writable or in-use'.
  Any ideas what is wrong?

  Trying to find a file whose name ends with .lock in the same folder as your catalog file. If there is such a file, remove it. Do not remove anything else.

• Help: Cannot open any application "Safari" because PowerPC is not supported on the current computer

  Hi all

  Until I look crazy, my Mac Book Pro (end 2011) is still running. Today, I already had some running applications (Safari, Virtual Box, etc.). When I tried to open a new window, Safari said "no internet connection".  I shut Safari and attempted to restart.

  "Failed to start Safari because PowerPC applications are no longer supported."

  He then removed Safari from the dock.

  Environment:

  MacBook Pro (late 2011)

  68 GB free on 700 GB HDD

  El Captain (10.11.4)

  I tried to open Contacts. Same error message.

  

  To be clear: these are the built-in applications on the Mac.

  While I download application files, I'm fairly warned about scams and not did something recently on the machine.

  I hesitate to restart where it tells me that my entire machine is a Power PC application and is no longer supported.

  Has anyone ever heard talk about something like that?

  Thank you

  Andrew (write in a VM on the Mac as the app still works)

  FYI - I have Remote Desktop running and was able to connect to a machine on the Internet, however, I can not start any application, Console.

  

  Test in safe mode: try safe mode if your Mac does not commissioning - Apple Support

  If the problem occurs in safe mode, and then reinstall through recovery.  Reinstall will not erase your data, it won't replace system files and included OS X applications.

  How to reinstall OS X on your Mac - Apple Support

• cannot answer with impatience or send new email, "windows live hotmail impossible to complete this application.

  I can't answer or send new email and the message "windows live hotmail impossible to complete this application.

  IE 9 running on the Vista operating system

  How is this related to Windows Update features, Marilyn?

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator

• Cannot retrieve OBIEE 12 c 12.2.1 - Sample Application version v511

  Hi all

  I downloaded OBIEE 12 c 12.2.1 - Sample Application version v511 from Samples of OBIEE

  Then, I selected the first .zip file and tried to extract the file.

  During extraction, I am getting errror as END OF UNEXPECTED DATA, and it fails with the error CRC failed.

  I followed the same steps that are mentianed in the Description as well as in the video but no luck.

  I thought that maybe the file is corrupted, but I get the same error even after download 4 th time set application example.

  Browsers, download managers, I changed and I reinstalled 7Zip and Winrar to extract but its extraction do not.

  Using WinRAR, I tried to repair the file and I tried to extract but not luck.

  Please help me solve this problem.

  Thanks in advance

  Olivier Ichalakaranji

  Does that help? Re: Oracle SampleAppv511 damaged disc