Cannot delete the keyframe markers multitrack clip
Hello, I use Audition for years and teach it to my students. What Miss me when I can't add keyframes (volume and panning) to the element in the multitrack timeline? When I hover the cursor to move the pan or volume keyframe line tool, I can't drop a keyframe. What Miss me? ThanksCan
Apparently 'Activate keyframes Clip' has not been activated.
Tags: Audition
Similar Questions
-
Cannot delete the registry key
I use Vista as an administrator. I would like to delete the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003. I right-click and click on delete. I wonder I want to permantently delete the key and subkeys, click Yes. I get a message saying ' cannot delete the disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003: error while deleting key.»
I'm with the right button and go to permissions. I try to change the permissions for everyone and the OWNER RIGHTS to full control. I get the message saying "cannot save changes to permissions on disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003. Access is denied. »
Should what step I take then to perform this deletion? Thank you!!!
Establish you as the owner of the key first, then give you all the permits "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?
Found a solution to this problem.
Go to the folder parent of the folder that contains the files with this unknown account number:
1. right click on the PARENT folder, and then click Properties.
2. on the Security tab, go to the advanced options (bottom window)
3. in the new window, click the button change the permissions in the bottom.
4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
5. check "replace all permissions of child object with permissions inheritable of this object.
6. click on the OK button or apply and done, fixed number.Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.
-
Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right
Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r
s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity. -
Cannot delete the folder where the backup is saved.
I have recently reinstalled Windows.
I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.
now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.
I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".
Can you help me? This file is large and takes place on my hard drive.
Hello
1. what happens when you try to delete the folder?
2. do you get any error code or error message?
I suggest to try to delete the file in safe mode and check if it helps
Start in Safe Mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAlso try the steps in the following Microsoft article and check if this may help.
Why can't I delete a file or folder? :
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Hope the information is useful.
-
I have a folder called test on my desk that I created to try the xcopy commands. Anyone who has nothing to do with it. I think that when I created the folder I could add a space somewhere in the file name. He is currently empty that I deleted a word of her documents.
However I can't remove it. It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop. Have already tried to delete the file in safe mode but not no luck. Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files. If I right click a properties to create the size is 0bytes and created a modification dates are suppressed. How can I delete the file?
'\\?\%userprofile%\desktop\trial*' of RD/s'\\?\%Public%\desktop\trial*' of RD/sNote the * appended to the name.--..--"J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...> Ok, I tried both commands and came to the same thing.>> Other ideas please?> -
partition 'Windows cannot delete the active system partition on this disk.
I created a partition of HARD drive in order to install a system in multiboot using XP and Vista, but I did mess up the BONES of the two. Now I want to do a clean install of Vista ONLY, but I don't know how to get rid of the partition! * Example: Computer management > disk management > right-click on the volume (M) > Delete Volume * but I get an error: "Windows cannot delete the active system partition on this disk" can someone help me to get my Vista to original?
P.S. I have the "Microsoft Windows Vista Home Premium32 - bit Operating System Disk" provided with my computer when I bought it new. Thank you! -Jeff
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
Delete the existing Partitions during the process.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
See you soon.
Mick Murphy - Microsoft partner
-
Microsoft Movie Maker - cannot change the length of each clip.
Cannot change the length of each clip on Microsoft Movie Maker.
I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.
I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.
Thank you
Cannot change the length of each clip on Microsoft Movie Maker.
I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.
I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.
Thank you
================================
The change of setting to: Tools / Options /.
Advanced... tab applies only to the added clips
to the timeline * after * you change the setting.If you switch to view "Storyboard" and select
all of the clips as a batch (select one and the type...
CTRL + A)... you can add the 'Speed Up, Double.
or "Slow down, half" effect of changing the
duration. Simply select all clips / right click
the effect on the menu... Choose...
Add to storyboard table.'Speed Up, Double' cuts the duration of half.
"Slow Down, half ' double life.
These effects can be added up to six times.
If you need finer adjustment...
the info may be useful:You can change the duration for each clip
manually. Move your pointer autour the
edge of an element until you see a double red
arrow. Now, drag the double red arrow...
you will see if show a ToolTip displays the duration
train to change.Or... just to redo the project after changing
the long-term: Tools / Options / Advanced
tab.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Photosmart C6380 - cannot delete the document removed from the print queue.
Photosmart C6380 - cannot delete the document removed from the print queue.
Hello
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler , made service right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
Kind regards
DP - K
-
Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."
I got this file from my friend got sent - is a word document, I had on their computer. So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded. Does not work.
When I check the properties, there is no security tab so I can't transfer ownership in this way.
I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long. I can't rename it either, of course.
Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.
What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away. Once registered. I click with the right button on the new file and rename the exact name as the file problem. Don't forget to change the file extension (ex: .doc)
ex file problem: word.doc
new file: word.doc
as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.
-
Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device
HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
Any help will be greatly appreciated.Hello
Method 1:
Run the fixit available in the link below and check if that makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.If the problem persists, I will be asked to contact the hardware manufacturer for assistance:
Hope the above information is helpful.
-
Extractdion failed, cannot delete the output file
I have Windows Pro 8, 64-bit, 8G of RAM.
When you try to install the drivers of HP, I get the following error. Extraction failed, cannot delete the output file. I get the same error using the download I used to use with Win 7 and a new download from the HP Web site. I have also tried to run the program as an adminitratior and get the same error message.
I managed to do the work. I found on my C drive the location of the files when extracted and run the installation program from there.
-
CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE
Try to patch effect for Deskjet 722C for Windows 7. Not able to replace the existing .dll files. Error messages: could not open the output file, cannot delete the output file.
Thank you for your response. I found these solutions but still had problems.
However, I was able to bypass Windows with a DOS command that did the trick.
C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3
-
Cannot delete the application role - error OBIEE main
I tried to fix my personal account of OBIEE today and tried to remove me an applicaation role in enterprise manager and received the following error
Cannot delete the main application role; main < user name > is not a member of the application role < role >
Has anyone seen this error?
My user id also seems to be capitalized - ex userid: Userid rather than what I expect it to be in all the tiny userid
Hi Christian
You are right that I am on 11.1.1.7.140225
I was able to fix this very weird error in fact goes here/home/itadm/u01/obiee/user_projects/domains/bifoundation_domain/config/fmwconfig
Open the file system-jazn - data .xml
And by removing the additional entry manually
So I deleted the following
weblogic.security.principal.WLSUserImpl rodneyc Then when I went back to EM the user had gone as planned. I'm guessing that something screwed up in this file, but all right
Thank you for the help
-
You cannot delete the pattern used to the absence of an employee
We are on 11.5.10, there is one issued due to the Absence. Suggest, we created type absence as "Time off" and attached reason which is mentioned below. After a while, we decided to remove the specific reason so that this employee cannot select this reason while submitting to authorization through self-service. Although we have disabled that always shows the reason for the "ABSENCE_REASON" research but employee self-service creates leave.
"However, when I try to remove holiday because of the type of absence as mentioned above, then system will trigger the message" error MESSAGE: "you cannot delete the pattern used to the absence of an employee.
Reason
1 accident
Appointment 2.doctor
3. others
How can we remove the 2nd reason (doctor appointment) to the list even if it has already been used in absence transactions.
Thank you.Have you tried to value in the research of reason for the absence of end date?
Also clear the Cache before testing...
Maybe you are looking for
-
Hello I m new in labview. I want to run my VI means automatically when I double click on my VI. I don't have to run it manually by clicking the arrow to run it. Infact I want to remove this bar to my application program.
-
I removed the kodak easy share thought that would get rid of it, however, there is no. I don't know what to do
-
Icon of the status bar indicates "Windows cannot check the updates. When I try to manually check for updates, I get the error code 80070005.
-
Hey everybody, Im having some very annoying keyboard lag on my Z3. I read some things about it on the internet and it seems to result from the scaling down of the CPU. in which the keyoard is not responding as it should. I did a video of it: https://
-
understanding version fixed in IOS (e.g. CSCtn74228)
Hi all! Please explain what it means (for example the bug No. CSCtn74228) 1 found-InM4 15.0 (1) Fixed inM5.4 15.0 (1) I do not understand fixed version. Do does it say that this bug is fixed in 15.0 (1) M5? How can that be if 15.0 (1) M5 was released