cannot detect usb 3.0 on Pavilion 15-N253TX ports after the downgrade from Windows 7 Pro

Similar Questions

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• AMD Rrdeon HD 7400 - models of HP pavilion G6 1117tx graphics card now works correctly after the upgrade of windows 8 Pro.

  Hello

  I have hp Pavilion G6 model 1117tx.  I have upgraded from windows 7 to windows 8 Pro. After the upgrade, I observed that on right click option, I didn't fine CCC and Configure with the graphic option switachable is missing. so please help me how can I solve DIF relationg AMD redeon 7400 grphic card and intel option hd switchable hd 3000 series grphic.

  Help, please...

  Patel Mounal

  (1) have you read full sheet of your Hp pavilion?

  (2) otherwise average, first downlaod read the documents at the bottom of link

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?CC=US&DLC=en&LC=en&Product=5118185&Query=HP%20pavilion%20G6%201117tx%20&Tool= &

  (3) these manuals may be contains details of compatible video graphics cards

  sufficient capacity

  (4) and check that your graphics card is compatible with the motherboard and current operating system

  (5) read the technical specifications of AMD Rrdeon HD 7400

  http://www.AMD.com/us/products/notebook/graphics/7000m/7400m/pages/Radeon-7400m.aspx#2

  (6) see amd graphics software drivers FAQ, see link below

  http://support.AMD.com/us/KbArticles/pages/AMDGraphicsSoftwareandDriversFAQ.aspx

  (7) downlaod and install AMD autopilot below link detection tool

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  (8) download and install the latest drivers from AMD catalyst HD 7000 series, choose current

  operating system at the bottom of the link

  http://sites.AMD.com/us/game/downloads/pages/downloads.aspx

  Restart your system

  Guilbert

• USB ports no longer work after the downgrade to windows 7

  I bought the new laptop model No.: E5 - 574G. It comes with windows 10 I don't feel comfortable with windows 10 then, I installed windows 7, but after installation of windows 7 and I installed all the drivers and even driver USB but USB is not showing / detection with laptop. I see when I go the usb is connected present in the BIOS boot sequence. I have also followed the process of uninstalling the driver and then restart the windows but it does not solve this problem.

  Let me know how can I solve this problem.

  Thank you

  Pleasantries,

  Mufasil.

  Thank you very much for your answer quick, I did but it shows me the list of drivers, I select Universal Serial Port and I see what we should I choose.

  

• HP Pavilion QG833EA #ABH G6: after the upgrade to windows 10 I tride return to windows 7

  HII,

  After the upgrade to windows 10 I tride return to windows 7. Now wen my laptop startsup screen is all black and shows.

  An operating system not found. Try disconnecting all the drivers that do not contain an oparating system.

  I have afriting of tride, but noting help als cant reser of system or bios. I said a test of the system is givs oke!

  How can I reinstall windows?

   

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - M892G - 84D7W-VYVVB
  Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
  Windows product ID: 00359-030-0078141-85521
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.120330 - 1504
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  Microsoft Office XP Professional - 100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {A9BF75C2-FBF3-4795-953B-E259BD0C2131}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-VYVVB00359-030-0078141-855215S-1-5-21-1580701254-2691487138-3117158855HP-Pavilion,FK484AAR-ABA m9400tAmerican Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC100100Microsoft Office XP Professional10roTAwuyn2K8JnfnZ5p70qCWUSww =54186-640-4025656-1742314 97728824C57890A

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
  Installation ID: 010516027730660442597094592351394511091775644602024082
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VYVVB
  License status: licensed
  Remaining Windows rearm count: 5
  Trust time: 10-02-2012 17:32:36

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:1:2012 07:16
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  GSCI HPQOEM SLIC-CPC
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

• Suddenly cannot open new tab, immediately after an update of MSWindows7, or after the upgrade to Windows 10 - tired, all kinds of bugs, no luck.

  Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.
  I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I'm not going to create a new FF profile.
  I restart my PC, nothing helped. I chose "never" (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
  I installed FF for Windows 10 just after the installation of Windows 10.
  I am a user of whether average PC.
  Thanks for any help you can give,
  Steve V.

  Dear cor - el,

  Now, I'm happy! Thank you very much.

  New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.

  Anyway, thanks again for sharing your time and skills.,.

  Steve V.

• Can I downgrade from windows 8.1 for windows 7 on a HP Pavilion 500-298w?

  Is it possible to downgrade from windows 8.1 for windows 7 on a HP Pavilion 500-298w?

  Can someone direct me to the instructions?

  Thank you

  Hello

  You can buy a license of Windows 7 64-bit.  Buy external DVD media.

  You can find the HP Windows 7 64 bit drivers posted here.

  This document will instruct you on how to disable the UEFI mode and the mode of inheritance.

  Don't forget to create the external HP recovery media before attempting to change the BIOS settings and installing Windows 7.

  Review this article on the 5 different ways to install Windows 7.

• Can I downgrade from windows 8.1 for windows 8 on a HP Pavilion 500-298w?

  Can I downgrade from windows 8.1 for windows 8 on a HP Pavilion 500-298w? The system came with 8.1.

  Hello

  You need Windows Pro 8.1 to get Group Policy Editor.

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• HP Pavilion Notebook - 15-p100dx downgrade from windows 7

  Hi, Im Colt and I recently bought a HP Pavilion Notebook - 15-p100dx and it came with windows 8.1 I use windows 7 at work and at present cannot install my Flash drive because of the way the drive is partioned to 8.1 will need drivers for windows 7 for this motherboard and chipset.  And need to know how to get to startup command propt before entering Windows I think.  Can someone please.  Thanks in advance!

  Hello

  I just bought this laptop and downgraded it to win7.

  1st thing you need to do is boot to the BIOS (f10)

  In the bios, you must turn on then save (f10)

  Start (f9) to the Startup menu.

  Select (usb or dvd) boot device

  Custom, install and remove all partitions

  Then install win7

  Too far than go to drivers, it took me a lot of research to find each other.

  I now have a backup of all drivers if you need.

  I am currently going through the process of making all the windows updates.

  I'll post a link later when I get home for drivers

  Win7 works a lot on this laptop.