Doubts on my new book

Hi all:

I bought a new book a few days ago. I am really satisfied with this wonderful machine. After using it for a few days, I have two doubts:

(1) the fan in my booklet is most of the time. Is this normal?
(2) what are the specifications of memory? I want to upgrade the RAM in my machine, but I have no reference manuals for do I have to use the memory modules.

Thank you very much

In case it helps to... My experience with my U100 is the fan is certainly * not * "almost all the time." For example, I went about 40 minutes before to check emails, news, etc., using the power of the battery and the default 'normal' power setting, and the fan is not switched on once. (Room temperature is 23 degrees c).

If I use it outside in the Sun very as the case becomes hot to the touch, the fan tends to come regularly.

If it runs on my desk from the power outlet (using the parameter 'high power' by default) and I do the work of the processor hard as when you make a disk backup or editing photos, then yes the fan are quite light. But it's just like most laptops.

If she does everything what * and * the sun shines directly on it as well, then the fan comes on saying maybe 50% or more of the time. (A silver case would have reduced the effect of solar heating - but look very smart matte black ;-).)

How does this compare with your experience?

To the subject of RAM, yours came with 512 MB like mine? (I guess this would be the module PA3312U - 2M 51, as described on this site - 512 MB memory PC2700 DDR SODIMM (333 MHz)).

Before I bought the machine the provider told me that he has that one slot RAM and that in order to upgrade the memory, I would need to take the existing 512 MB and replace it with a 1 GB module. But I have not confirmed which and there is no mention of a module of 1 GB on this site. The 512 MB so far seems sufficient, but I would be interested to know if you are able to increase the RAM on your U100.

Kind regards
David Tong.

PS. It occurs to me that if you feel the need to increase the RAM, then maybe you do work pretty hard machine, in this case you expect the fan to be busy.

Tags: Toshiba

Similar Questions

  • in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

    in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

    From the link 'related items' below, see:

    Give your book a new internal ID.

  • When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

    When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

    Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

  • CC Adobe tried to run for 5 hours on my new book surfaces/windows 10. no idea what is happening?

    Hello

    Capture.PNGThe Adobe Creative Cloud App refuses to engage on my new book surfaces/windows 10. I was able to install Photoshop and Illustrator last week, but when I just swipe of it again today to download Adobe Acrobat, it is just and runs forever without getting to the point where I have a choice of applications to download.

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

  • When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents

    With FrameMaker 2015. When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents, they are totally blank does not even a block of text. I click on Add> autonomous Create TOC. I keep the default settings. And that's what I'm left with.

    TOC Frame 2015 small.png

    I can get rid of them by special> Delete page. But I never had to do before the 2015 version. I tried with older files generated in frame 10. same thing. If someone has encountered this?

    Master Pages are part of each document.

    You can import master pages from another document (i.e. a ' model') in your current document using the file > import > Formats... option and select layout from the list (deselect all others).

    If you have changed the current TOC for the problem of the Page Master on the left, then simply save the file and use the Edit > update book option for that OCD regenerated by using the new page templates.

  • About 2000 bought Adobe Creative Suite, was performed with CS5 what, if anything I can do to bring to my new book to run 10.10.5?

    About 2000 bought Adobe Creative Suite, he turned with CS5 on my beloved Power PC. If necessary I can do to bring to my new book to run 10.10.5?

    If it is incompatible with your operating system, easy you can do anything.

    otherwise, install and activate it.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • How to start a new book?

    Working in the module in LR and created book something just for practice.

    I don't want to keep or to publish.

    How can I remove it and be ready to start a new book sometime in the future?

    Check the Collections Panel at the bottom left of the book module. If you have saved the book, it can be removed by simply trashing the collection. You can also use just the clear book button at the upper right of the area of grid/magnifying of book.

  • Start a new book and add files

    Hi, I'm fairly new to FrameMaker scripts. It's what I'm doing and where I am:

    (1) converting .mif files FM (completed)

    (2) start a new book

    (3) add each FM in record book at step 2.

    To start with step 2 & 3 any help would be greatly appreciated.

    Thank you, Kevin

    Kevin,

    I don't test anything, but I think it should work:

    model var = book. NewSeriesBookComponent (0);

    Comp. name = "C:\\SomeDocumentPath";

    etc.

    Russ

  • Please, I was faced with problems when creating a new book in Indesign CS6!

    Hello! I'm going to talk to you about my problem: I work for a COMPUTER company in the Brazil and we have developed a five - hundred page manual in Indesign CS6 software.

    Then, we decided that each chapter would be an .indd (document Indesign CS6) and that these 27 chapters would be part of a book (.) INDB).

    Finally, we got our book in the first revision (.) (PDF). In June, we copied our first revision in order to create a second.

    We recorded the second revision of the book (.) INDB) in June 2013. Now, in September, we tried to open this book, once again, to no avail...

    The second revision opens the first review! It's as if we have not saved our second revision, but I'm sure that we did.

    So, please I would like to know:

    (1) what we were wrong in this whole process of creation of new books;

    (2) if it is possible to import a PDF in Indesign CS6, because our PDF is right, but we have our unchangeable.

    I'll be grateful for any help!

    Thanks in advance!

    Making copies does not work the way you think that with books.

    A file .indb is naoual a collection of pointers to the individual files and make a copy, even if you copy individual files, not is not updated where the .indb showed up.

    There are two options here. PACKAGE the book and again work package, or make a new .indb file and add your copied .indd files.

  • New book by Steve

    Everyone has heard about the new book by Steve?

    What book is that Chuck? Please tell me more...

  • new book on Amazon illustrated with paint

    On Amazon, entirely new picture book illustrated by using MS Paint

    Ratimir 2

    River rat River Rats

    > Can u use Paint to create illustrations for the picture book for children?

    Painting is perhaps not the best choice, but yes, you can create this type of image with paint?

    A professional or advanced amateur would certainly use a more advanced graphics program.

    Don

  • Topics and new books do not appear in the table of contents after generated in DHTML (RoboHelp v8)

    Until recently, when I tried to add a topic for a book in the Table of contents, I just dragged into the project manager in the Table of contents.  I don't know what is different today, but the new entries appear in the Table of contents pod but not in the generated DHTML.  To make it more confusing, to me anyway, some newly added topics show.

    ToC problem.png

    Hello

    I don't think 'huge' search and replace that can affect things. But we need to check a few things first.

    When you look at the SSL recipe, using any type of a conditional build Expression? If so, perhaps you have tagged content and it is not for this reason.

    See you soon... Rick

  • ADE all of a sudden, I cannot return a book, or to receive new books

    I had no problem with ADE during several years (ver. 2.0.1.78765).  Now, suddenly, it won't allow me to return a book, which gives the following message: "error to return item! Please allow your computer first. "When I go to the Help menu > permission, he says the computer is already authorized and gives the chain of approval.

    If I try to put a newly downloaded book in ADE, I get a message that says "error!, check the permission", but it doesn't tell me how to do this.

    I recently received a message to say Microsoft I need to change my logon to a local account and then through this procedure.  This could be the reason why ADE no longer works?  If so, how do ADE operational again?

    Kent Drummond

    [email protected]

    Windows:

    Close all applications.

    Click Start > run.

    Open, type regedit in the text box and press ENTER. The Registry Editor opens.

    In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

    Select the key of the follower.

    Choose file > export.

    In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

    Right click on the key to the follower, and then choose Remove.

    In the dialog box confirm the key deletion, click OK.

    Close the registry editor.

    Open Adobe Digital Editions and reauthorize.

    Macintosh:

    exit the Adobe Digital Editions software.

    Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

    If you use 10.7, see https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

    Open Adobe Digital Editions and reauthorize.

  • Began to explore Muse but had to Drop off. Now, back to it again, but still have a doubt with the new version

    My doubt is:

    IOS + scrolling effects: are they compatible?

    Parallax / scrolling Fx + Apple devices were not long, I remember... And if my sources of information were correct. I think that at some point I read a while back that now scroll effects / Parallax works on Apple devices, but cannot return to this info.

    Could someone REALLY pro could confirm whether she is fully compatible?

    I plan to undertake a project with scrolling effects involved and must ensure that it will be fully compatible with all devices / browsers etc...

    Thank you very much!

    Hello

    IOS and scrolling effects are compatible. The only thing that does not work with the scroll effect is pinch and Zoom on mobile devices or tablets.

    Kind regards

    Aish

  • I just purchased Lightroom, and it happened today, but on a CD.  My new book of Apple Mac doesn't have a CD player.  What should I do?

    How to install Lightroom on my new Apple's MacBood, which doesn't have a CD player?  I just purchased Lightroom, but it happened on a CD.  Help

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

Maybe you are looking for