Cannot display the element of PL/SQL

Similar Questions

• Cannot display the results to the database during "Update": SQL statement

  Hello

  I get this error trying to update a VO via the UI or BCBrowser.

  Cannot display the results to the database during "Update": SQL statement

  This is a default single front & right THAT VO creates on the object of the entity (Database Table)

  On the same table and with the same credentials of DB, I could update the record.

  Any guess on what went wrong?

  Thanks in advance for any help.

  p.s Jdev 11.1.1.6

  Journal:

  oracle.jbo.DMLException: Houston-26041: could not publish data from database in "Update": SQL statement "START the CAR UPDATED CarEO SET SEL_ITEM =: 1 WHERE TXN_NO =: 2 AND LOGID =: AND SEQNO = 3: 4 POLL DELIVERY_MODE, CERTIFICATION_REQ, SOFT_COPY_IND, SELITEM IN: 5,: 6,: 7,: 8; END; ».

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:583)

  at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8575)

  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6816)

  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3290)

  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3093)

  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2097)

  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2378)

  at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1615)

  at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1417)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)

  at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)

  at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)

  at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:111)

  to oracle.jbo.uicli.controls.JUNavigationBar$ NavButton.actionPerformed (JUNavigationBar.java:118)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Caused by: java.sql.SQLException: invalid column type

  at oracle.jdbc.driver.OracleCallableStatement.registerOutParameterInternal(OracleCallableStatement.java:150)

  at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:399)

  at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:581)

  at oracle.jdbc.driver.OracleCallableStatementWrapper.registerOutParameter(OracleCallableStatementWrapper.java:1765)

  at oracle.jbo.server.OracleSQLBuilderImpl.bindUpdateStatement(OracleSQLBuilderImpl.java:2243)

  at oracle.jbo.server.EntityImpl.bindDMLStatement(EntityImpl.java:10524)

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:412)

  ... 52 more

  The problem is solved now.

  new columns added to the database table, after the creation of the entity object. Those changes were not picked up in the entity object.

  I found this difference after object entity with the DB Table comparison.

  And when I added these new columns to EO & VO, I don't get this error more.

  Thanks to all who tried to help

• RV120W ROUTER/firewall "cannot display the webpage".

  I have a small LAN using a T1 of One Communications line.  Static IP address.

  30 workstations.  Windows 2003 DHCP server.

  Installed new RV-120W firewall router last week replacing an old unit of Netgear.

  Configure VPN tunnel on the unit, have remote access for about 10 users.

  This part works well.  A little slow, but acceptable.

  My question: is internet connectivity on internal LAN in and out.  She's very agitated.

  Upload and download speed has been consistent (~2.5M/sec)

  External Pings see the very minimal loss.

  Users have seem intermittent loss of web streams and corrupt downloads.  web activity 90% is ok, but we continue then getting "cannot display the webpage error."

  NSLOOKUP displays the DNS, but occasssionally "TIMEOUT" occurs.

  I got the provider perform loopback tests and replace WIC on CISCO 1841 router T1, but I still see the behavior.

  I see by reading other forms, that it is an ongoing problem with the routers of RV.

  My settings...

  Public static IP / DNS on the router.

  Reverses the MTU to 1500.  I have adjusted downwards by increment to 1350.

  Windows Server 2003 has RV120W address as the router / gateway.

  T1 to CISCO 1841 ROUTER... to CISCO RV120W... to LAN CISCO SLM248G interrrupteurs (2).

  I do not configure all redirects the port.

  I continue the line tests on my end, but as I said this problem was not existing with Netgear unit.

  Please indicate any change of setting / suggestions.

  Hi Jason et al...

  In my view, the technician are now experiencing a UDP on the Rv120W question.

  The internal discussions on the issue of R & D and development seems to be;

  1. default on RV120W a UDP Flood attack control that limit 25 UDP by customer connections in one case there, IE to a particular instance of time a PC behind the router can establish only 25 UDP Transactions, if we exceed router drops packets UDP.

  2. we have a script that sends dns queries to search at a very high pace that the router deletes the entries in the UDP, in this way, that we accumulate the UDP entry in the router table (IE 25 entries)

  3. once 25 limit is reached, we are unable to resolve DNS queries, in addition to using the script or by using the browser.

  4. in real-world scenarios it could be a PC behind the router and open a website where all the elements on the Web page are related to the different website, if you open this type of Web site, it may have links to over 25 different site and clog the table routers UDP for the PC and the user may not able to solve queries DNS additional and impossible of browse all new Web sites. This inability to browse happens until the UDP entries on the router time dead and are deleted.

  5. this limit of 25 is because of the feature called raw block UDP on the router that is enabled by default.

  6. once we disable the block UDP Flood, router does not check 25 connections limit UDP and dns resolution is continuous, without interruption.

  This is a customers in the area could be to see breaks in the DNS resolutions and browse site failed.

  Some customers talked explicitly about DNS failures.

  Jason I see that you have placed a service call, so I hope that CCORAL who posted August 15 should be helping you.

  So people, if the technician finds the problem not a hardware issue requiring an RMA, the technician will intensify the call for our people of level 2 in the Irvine case, probably CCORAL.  You will get a help to solve this problem.

  The small business support center, should be aware of the problem. Please do not hesitate to show them this announcement, I am ready to discuss with them to get things moving.

  Yet once, if you have not already done, please contact the HWC and place a request for service and keep a copy of this number they give you as a reference (you can need). My apologies for the inconvenience that you all had.

  concerning

  Dave Hornstein

  Small businesses, channel system engineer

  Cisco - Research Triangle Park.  U.S..

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

• The website cannot display the page

  Hello
  
  I create a custom component and add it to project as a library, when I add to the page, and then deploy it (successfully deploy) the result page will be empty *(The website cannot display the page) * without exception, have idea about this problem?
  
  Note that I use JDeveloper 11 g & ADF

  Have you looked into the app server logs? You really do jsf components custom or do declarative adf elements? What is your code looks like (all of it)? You app was working before you put the reference in our custom component? What is your hat size?

• ODI - cannot display the Essbase data?

  I just installed ODI and Essbase has been installed in my PC a long time ago. I find a document called: odiess_getting_started.pdf, this document is a sample for ODI and Essbase. I followed the steps described in the document,..., later, when I want to see Essbase data of the ODI Designer see the example Essbase application database such as: scenario, market, it appears the error message: "Cannot display the data in the table", "java.sql.SQLException: Driver must be specified."
  java.sql.SQLException: Driver must be specified
  at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
  at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
  at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
  at com.sunopsis.graphical.frame.b.jc.bD (jc.java)
  at com.sunopsis.graphical.frame.bo.bz (bo.java)
  at com.sunopsis.graphical.frame.b.ja.dj (ja.java)
  to com.sunopsis.graphical.frame.b.ja. < init > (ja.java)
  to com.sunopsis.graphical.frame.b.jc. < init > (jc.java)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at com.sunopsis.graphical.frame.bb.b (bb.java)
  at com.sunopsis.graphical.tools.utils.swingworker.v.call (v.java)
  at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
  at com.sunopsis.graphical.tools.utils.swingworker.l.run (l.java)
  to edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:665)
  to edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:690)
  at java.lang.Thread.run(Thread.java:619)
  
  What is the problem with me? Thank you!

  This is one of the many 'characteristics' of ODI.

  Data preview works for SQL and just about everything (well, I think it works for text, but nothing Hyperion files).

  I have this trouble, John Goodwin to correct.
  Kind regards

  Cameron Lackpour

• Internet Explore cannot display the page

  Hi all

  I m new to this and I need a little help that one when I connect to a Web page, he says internet explore cannot display the page. Any ideas how I can fix this problem? Be grateful for any help.
  Thank you all.

  First question;
  Haven't you set up the modem or the router correctly?

  Maybe your connection to the ISP (Internet service provider) was not set properly and so you are not able to connect to internet!

  Have you tried to connect to the internet with other computers?

  Reading your post I n t think that there is something wrong with the laptop

• Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message

  Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message. little help?

  Why do you want to delete?

  Where is located? (This file)

  What is it?

• Why teststand cannot display the ASCII character which number up to 128?

  Hi all

  I encountered a problem on an application for ASCII characters, why teststand cannot display the ASCII character which number up to 128?

  For example: an expression Local.xx = Chr (164).

  XX--> chain, can't do the correct string.

  An idea for this?

  OS: WinXP, SP1 Teststand2012.

  Thank you very much.

  TestStand uses encodings multibyte code page, that you have defined for the operating system-based. If you are using a code page that requires multibyte characters, you should also make sure that you have the Options of Station-> location-> parameter Regcognize multi-byte characters is enabled.

  On Windows 7, at least, the code page of the operating system setting is located in the control panel "Region and language" in the "Administration" tab where it says "language for non-Unicode programs".

  Hope this helps,

  -Doug

• HP laptop Pavilion G6 Windows 8 64-bit says cannot display the web page

  Windows Mobile 8 HP Pavilion G6 64-bit it says its connected to network & has internet access but when I try to access it repeat myself"cannot display the webpage" Ive checked all the cables, modem, router and restarted to refresh the signal without success. Called my service providerCox all troubleshooting can be done via phone again once nothing. Cox thought it was the modem so they sent a technician to replace it with a new one and still nothing. However I have no problem with my older Acer laptop, it must be the Hp laptop that has the problem. It just stopped working suddenly. Fine went looking for something and when I came back it just started doing this. What could be wrong? This is not only about a year old and only 1 user "" I use it for school, so I'm very cautious with it never dropped or spilled something on it. I don't even take it. He remains at home on the desktop. At McAfee with all updates except windows 8.1. Help!

  Hi Help_LynnsHP,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g7-1263nr Notebook and not being is not able to connect to the Internet. You have stated that you have McAfee, which is a firewall protection and or viruses. Have you tried disabling McAfee? Have you tried another browser? Here is a link to show you how do to troubleshoot Internet Explorer for Windows 8. You could try a System Restore.

  System Restore can restore settings that do not allow you to connect to the Internet.

  I hope this helps.

  Thank you.

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 0X80072EFF (cannot display the Web page)

  My pc is no longer updates windows, nor do an update error code manual 0x80072eff that my pc is proteceted by full protection of Virgin Media and analysis of viruses etc. See the there are no problem I get message internet Explorer cannot display this webpage.  When I try to update via the web site address microst update I get the following message:

  [Error number: 0x80072EFF]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  George,

  0x80072EFF = ERROR_INTERNET_CONNECTION_Reset

  Reading * carefully *-not just browse the page and start following the steps.

  You may encounter temporary connection Errors when you use Windows Update

  -or-

  Microsoft Update to install updates:

  http://support.Microsoft.com/kb/836941

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.