Cannot drop the table
The versions are Oracle 11.2.0.1.0 and Developer SQL 4.0.0.12 on Windows 7 Ultimate SP1.
Hello
I am training CBT Nuggets SQL basics (video #11) and cannot delete a table that I just created. The command and the error are:
drop table newprods;
Error starting line: 1 at the controls.
drop table newprods
Error report-
SQL error: ORA-00604: error occurred at the SQL level 1 recursive
ORA-20000: cannot delete the object
ORA-06512: at line 2
00604 00000 - "an error occurred at the SQL level recursive %s.
* Cause: An error occurred during the processing of a recursive SQL statement
(a statement applicable to dictionary tables inside).
* Action: If the situation described by the following error stack
can be corrected, to do so; otherwise contact Oracle Support.
As the HR user, I created two tables and created a FK constraint between them. After truncating the table with this FK, I am unable to drop. Even if I remove the FK, the error is the same. Issing the command in SQL * Plus gives the same error.
This is the first time that I have created a table from Oracle installation on this machine and is my first attempt to delete a table. I did not create sequences, triggers, or views based on these newly created tables.
Someone at - it ideas?
See you soon
Tags: Database
Similar Questions
-
Hello community,
We went just to ESXi 5.1.0 build-1021289. We have installed MEM 1.1.2 and used to configure all of the iSCSI network and has chosen to use our BCM57810 10G cards for unloading rather than use the SW initiator. We are currently on firmware 5.2.6.
We now see this error constantly in the vmkernel logs.
2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 338 expected)
2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
2013-05 - 04 T 21: 07:08.099Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)We did all the additional configurations generally suggested - disabled ACK delayed, disable LRO, iSCSI timeout.I can't tell if it's having an impact on our performance or reliability. He sees not to be. However, these errors constantly fill our vmkernel logs.Out of curiosity, I went our adapter SW config and I do not get these more. We would really prefer to use unloading iSCSI broadcom cards now that the frames are supported. Has anyone seen else this error or know how I could get more details about this?ESXi 5.1.0
Build-1021289
The problem is the new broadcom driver, when you use the mode of unloading iSCSI. VMware and Broadcom to release a patch. For now just use the iSCSI SW.
-
Why cannot create the table partitioned successfully?
Why cannot create the table partitioned successfully?SQL> create table hr.gps_log_his (id number, name varchar2(10), time date) tablespace ts_log_his PARTITION BY RANGE (TIME) (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')), PARTITION udp_part09110708 VALUES LESS THAN (TO_DATE('09110709','yymmddhh24')), PARTITION udp_part09110709 VALUES LESS THAN (TO_DATE('09110710','yymmddhh24')), PARTITION udp_part09110710 VALUES LESS THAN (maxvalue) ); (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')), Error on line 7: ORA-14120: DATE columns did not specify the complete partitioning limits.
The detailed error message is as follows:
ORA-14120: incompletely specified partition bound for a DATE column Cause: An attempt was made to use a date expression whose format does not fully (i.e. day, month, and year (including century)) specify a date as a partition bound for a DATE column. The format may have been specified explicitly (using TO_DATE() function) or implicitly (NLS_DATE_FORMAT). Action: Ensure that date format used in a partition bound for a DATE column supports complete specification of a date (i.e. day, month, and year (including century)). If NLS_DATE_FORMAT does not support complete (i.e. including the century) specification of the year, use TO_DATE() (e.g. TO_DATE('01-01-1999', 'MM-DD-YYYY') to fully express the desired date.
Action: Change to_date('09110708','yymmddhh24') to
to_date('2009110708','yyyymmddhh24') -
Cannot extend the table SYS. FIERROS_IMAGEN by 1024 in the SYSTEM tablespace
Hi all I have installed oracle xe on a Windows Xp computer, asked me for a password and I typed: 123
Then I have a myback.dmp filenamed backup and imported:
IMP file = myback.dmp ' 123/sys AS SYSDBA"full = Yes log = implog.log
example of messages: when importing
==============================================================================================================
. . importing table "FIERROS_IMAGEN".
IMP-00058: ORACLE error 1653
ORA-01653: unable to extend the table SYS. FIERROS_IMAGEN by 1024 in the SYSTEM tablespace
IMP-00028: partial import of the restored previous table: 63343 restored lines
IMP-00017: statement failed with error ORACLE 1917:
==============================================================================================================
How do I fix this error? need to create the tablespace? How?
and need to re-import? or only to import the table? How to change the imp command to specify the table?
Thank you
As KarK says you should not use SYSTEM tablespace for the user data.
If you can make after:
Create new tablespace:
Go to sqlplus and run (change the name, path, and a size suitable for you. You must have enough disk space for this new tablespace data file.) :
CREATE TABLESPACE PETIT_FICHIER DATAFILE «
TEST_TS_01.dbf» ' TEST_TS' SIZE 1512M LOGGING EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO;
Create a new user:
Go to sqlplus and run (change the name and the password for you):
CREATE PROFILE 'TEST_USER' USER 'DEFAULT' IDENTIFIED BY ' * ' DEFAULT TABLESPACE "TEST_TS".
TABLESPACE QUOTA UNLIMITED ON 'TEST_TS' TEMPORARY 'TEMP' ACCOUNT UNLOCK;
GRANT 'CONNECT' TO THE 'TEST_USER;
import of user data (user who has data (in the source database) you want to import) for this new user:
IMP system/password@tesdb fromuser =
= TEST_USER leader touser = myback.dmp log = implog.log and if it doesn't always fit you can resize your bigger like that new tablespace (once again if you have enough disk space):
alter database datafile '
TEST_TS_01.dbf' 2512 M resizing; If you need to make several attempts, then rub new user before retry (sqlplus) with
drop the TEST_USER user cascade;.
and then recreate it.
-
Cannot access the tables in other patterns of database Oracle
Hello. We got our Oracle database administrator to install APEX in our Oracle database. She created a login and a schematic for my Oracle database user so that I can work with APEX a bit. Here is the information about the version of the SUMMIT we installed:
Information about the Version of database
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE Production 11.2.0.2.0
AMT for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I found that my user can access the Oracle tables within my own diagram of Oracle database. Most of our main tables are in 3 other schemas and I need access to all the tables of all these schemes. Now, whenever I meet a drop-down list of values for the schema, by own schema is available in the list of values.
Is there something that our Admin can do to make these tables in other patterns available on my user account?Sharpe,
This documentation should point you in the right direction. It will show you how to add multiple schemas to a workspace.
http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21678/adm_mg_wrkspc.htm#CHDBDCCJ
See you soon,.
Janet Tyson -
cannot find the table name of the multiple tables which has more columns.
Hello
I'm trying to find the NAME of the TABLE from multiple tables which has more columns. I can't count the number of columns in the table, but cannot find the name of the table that has larger columns in other tables.
SELECT TABLE_NAME, COUNT (*) FROM THE USER_TAB_COLUMNS WHERE TABLE_NAME LIKE '% LOC' GROUP TABLE_NAME
Thank you.in SQL, you can try this:
var v_name varchar2(40) begin with subq1 as ( select table_name, count(*) as column_count from user_tab_columns where table_name like 'FIBER%' group by table_name order by count(*) desc ) select table_name into :v_name from subq1 where rownum = 1; end;
To get the result:
select :v_name from dual
The clause "with" brings together all the tables and ordered them all first, by the greatest number of columns
The final query uses the rownum restriction so that it takes the first name from the table of results of the subquery.The restriction of rownum also exactly guarantees a result each time so that it will work with the variable binding.
RP
-
Cannot drop the USERS tablespace.
Hi all
I am trying to drop tablespace USERS and in the face of error below.
PLATFORM:
OS: Linux Ubuntu 9.04, LTS
SQL > select * from v version $;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
AMT for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
PROBLEM:
SQL > drop tablespace users, including content and files of data cascade constraints;
Drop tablespace users including data files and content cascade constraints
*
ERROR on line 1:
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tables
When I see, dba_queue_tables...
SQL > select the owner, queue_table from dba_queue_tables object_type.
OWNER OBJECT_TYPE QUEUE_TABLE
------------------------------ ------------------------------ -------------------------------------------------------------
SYS ALERT_QT SYS. ALERT_TYPE
SYS AQ$ _MEM_MC
SYS AQ_EVENT_TABLE SYS. AQ$ _EVENT_MESSAGE
SYS AQ_SRVNTFN_TABLE SYS. AQ$ _SRVNTFN_MESSAGE
SYS KUPC$ DATAPUMP_QUETAB SYS. KUPC$ _MESSAGE
SCHEDULER SYS $_EVENT_QTAB SYS. PLANNER$ _EVENT_INFO
SCHEDULER SYS $_JOBQTAB SYS. ANYDATA
SYS SYS$ SERVICE_METRICS_TAB SYS. SYS$ RLBTYP
SYSMAN MGMT_NOTIFY_QTABLE SYSMAN. MGMT_NOTIFY_NOTIFICATION
SYSTEM DEF$ _AQCALL
DEF SYSTEM $ _AQERROR
11 selected lines.
Also, there no tables in the tablespace USERS now, as I moved to another tablespace.
SQL > select count (*) from dba_tables where nom_tablespace = 'USERS ';
COUNT (*)
----------
0
Tablespace USERS is not permanent tablespace, as I changed to another, always the problem.
SQL > select property_name, name from database_properties where PROPERTY_NAME = 'DEFAULT_PERMANENT_TABLESPACE. '
PROPERTY-NAME NAME
------------------------------ ------------------------------
DEV DEFAULT_PERMANENT_TABLESPACE
Can you please help me drop the USERS tablespace.Hi boss,
Please find the solution for the same problem, but by dropping the user. Try the same for the Tablespace too.
SQL > drop user cascade COLOMBO_LIVE;
drop the waterfall COLOMBO_LIVE user
*
ERROR on line 1:
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tablesSQL > select object_name from user_OBJECTS;
OBJECT_NAME
-------------------------------------------------------------------------MYQ
SYS_LOB0001130873C00025$ $
SYS_C001810004SQL > drop table myq;
drop table myq
*
ERROR on line 1:
ORA-24005: must use DBMS_AQADM. DROP_QUEUE_TABLE to drop queue tablesSQL > exec sys. DBMS_AQADM. DROP_QUEUE_TABLE (queue_table-online 'MYQ', force-online TRUE);
PL/SQL procedure successfully completed.
-
Cannot see the table in the p/sql procedure but can in normal sql
Hello
using 11.2.0.3
that sql format
Select schema_owner. < table > - it works in good sql and pl/sql get message table or view does not exist.
Other fine tables.
Y at - it a permission to have reference to the table in the pl/sql procedure rather than sql?
Thank you
Hello
I'm glad you solved the problem!
Don't forget to mark it as "answered". It will help others with a similar problem, and it will save time for people answering questions on this forum.
-
Cannot add the table to partition to partition
Hi guys,.
my version of oracle is 11 GR 2
I created the table with the following DDL
CREATE TABLE PERSON
(
ID_PERSON VARCHAR2 (10 BYTE) NOT NULL,
NAME_PREFIX VARCHAR2 (5 BYTE),
NAME_LAST VARCHAR2 (40 BYTE) NOT NULL,
NAME_FIRST VARCHAR2 (30 BYTE) NOT NULL,
NAME_MID VARCHAR2 (30 BYTE),
NAME_SUFF VARCHAR2 (5 BYTE),
CD_GENDER VARCHAR2 (1 BYTE),
DATE OF DATE_BIRTH,
FL_AGE18 VARCHAR2 (1 BYTE),
ID_SSN VARCHAR2 (BYTE 9),
ID_DMV VARCHAR2 (20 BYTE),
ID_PH_NBR VARCHAR2 (10 BYTE),
ID_ALIEN VARCHAR2 (10 BYTE),
ID_TRIBAL VARCHAR2 (10 BYTE),
NAME_TRIBAL VARCHAR2 (40 BYTE),
ID_CITY VARCHAR2 (5 BYTE) NOT NULL,
ID_AD_RESIDENCE NUMBER (38),
ID_AD_MAIL NUMBER (38),
CD_NVRA VARCHAR2 (5 BYTE),
DATE OF DATE_ACCEPT,
DATE OF DATE_EFFECT,
CD_STATUS VARCHAR2 (2 BYTE),
CD_STAT_REASON VARCHAR2 (50 BYTE),
DATE OF DATE_STAT_CHANGED,
DATE OF DATE_LAST_ACTIVE,
FL_RESI_PF VARCHAR2 (1 BYTE),
CD_RESI_PF VARCHAR2 (4 BYTE),
CD_RESI_OTH_PF VARCHAR2 (40 BYTE),
FL_ID_PROVIDED VARCHAR2 (1 BYTE),
FL_ID_NEVER_ISSUED VARCHAR2 (1 BYTE),
CD_ID_VALIDATION VARCHAR2 (2 BYTE),
DATE OF DATE_ID_VALIDATION,
FL_SIGNATURE VARCHAR2 (1 BYTE),
FL_US_CITIZEN VARCHAR2 (2 BYTE),
CD_CITIZEN_PF VARCHAR2 (5 BYTE),
FL_ACP_PERSON VARCHAR2 (1 BYTE),
ID_ACP VARCHAR2 (BYTE 9),
DATE OF DATE_ACP_START,
DATE OF DATE_ACP_END,
FL_POLL_WORKER VARCHAR2 (1 BYTE),
FL_CHALLENGE VARCHAR2 (1 BYTE),
FL_PREHAVA_PERSON VARCHAR2 (1 BYTE),
DATE OF DATE_DEATH,
FL_ELIGIBLE_DELETE VARCHAR2 (1 BYTE),
FL_ELIGIBLE_PURGE VARCHAR2 (1 BYTE),
FL_DISABLED VARCHAR2 (1 BYTE),
FL_ELDERLY VARCHAR2 (1 BYTE),
NAME_SEARCH VARCHAR2 (40 BYTE),
AD_SORT_NUM VARCHAR2 (20 BYTE),
ID_VALID_OTHER VARCHAR2 (50 BYTE),
ID_UVI VARCHAR2 (16 BYTE),
ID_CITYSHIP VARCHAR2 (5 BYTE),
FL_PROTECTIVE_ORDE VARCHAR2 (1 BYTE),
FL_INACTIVE VARCHAR2 (1 BYTE),
FL_OVERRIDDEN VARCHAR2 (1 BYTE),
FL_ALT_REG_SIGN VARCHAR2 (1 BYTE),
FL_PERMANENT_ABSEN VARCHAR2 (1 BYTE),
CD_SPEC_STATUS VARCHAR2 (1 BYTE),
FL_UOCAVA_COMMUNICATION VARCHAR2 (1 BYTE),
AD_UOCAVA_EMAIL VARCHAR2 (254 BYTE),
CD_PARTY VARCHAR2 (5 BYTE),
DATE OF DATE_PARTY_ENROLL,
DATE OF DATE_ACCEPT_ORIGINAL,
DATE OF DATE_MOVED,
DATE_CHANGED DATE,
AD_EMAIL VARCHAR2 (254 BYTE),
CD_RACE VARCHAR2 (5 BYTE),
FL_CITIZEN_HEARING VARCHAR2 (1 BYTE),
ID_USER VARCHAR2 (20 BYTE),
TM_STAMP TIMESTAMP (6).
DATE OF DATE_LAST_CONTACT,
NAME_PREV_LAST VARCHAR2 (40 BYTE),
NAME_PREV_SEARCH VARCHAR2 (40 BYTE),
DATE OF DATE_REG
)
TABLESPACE PERSON_DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
LOGGING
PARTITION BY RANGE (ID_CITY)
(
P_PERSON_1 PARTITION VALUES LESS THAN ('1')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_2 PARTITION VALUES LESS THAN ('2')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_3 PARTITION VALUES LESS THAN ('3')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_4 PARTITION VALUES LESS THAN ('4')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_5 PARTITION VALUES LESS THAN ('5')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_6 PARTITION VALUES LESS THAN ('6')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_7 PARTITION VALUES LESS THAN ('7')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_8 PARTITION VALUES LESS THAN ('8')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
),
P_PERSON_9 PARTITION VALUES LESS THAN ('9')
LOGGING
NOCOMPRESS
TABLESPACE PERSON_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE)
64K INITIALS
ACCORDING TO 1 M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
DEFAULT USER_TABLES
)
)
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING
ALLOW THE MOVEMENT OF THE LINE;
I tried to add the partition with the highest value 10
change the voter table add partition P_PERSON_10 lower (10);
change the voter table add partition P_PERSON_10 lower (10)
Error on line 11
ORA-14074: partition bound must gather greater than that of the last partition
I want to add 100 to leave with max 100 value, please help me in this regard.
Split partition also get the error
Thanks in advance
Kind regards
REDA
ID_CITY a VARCHAR2 is not a number. Thus, although "less than ('10')" is correct for a VARCHAR2 ("equal or superior (10)"), where do you think the value '2' would go? '2' less than '10' is? Where would the '21' value? Where would '56'? Tip: '21' is less than '3' and 56 'is less than 6'.
Also your first partition is defined as "less than ('1')", which makes no sense.
Hemant K Collette
-
Cannot change the table formatting
I have a really weird problem with a table. So, I copy and paste two tables to Excel in Indesign. In fact, they have two different selections of cells in the worksheet — not only the same Excel file, but the same spreadsheet (tab) in this file.
One of them, Indesign let me change what I wanted. Fonts, lines, fills, text color, you name it. Everything I did worked as expected on the first try.
The other has remove me my hair in frustration, because I do the exact same things and nothing not happens. In particular, no matter what I do - be it with cell styles, table styles, or simply by selecting certain cells and manually apply a swatch - there always even fills in Excel. I can't even get rid of the old fillings (for example by replacing with 'none' or 'paper'), much less to add new ones. A few other changes work and some don't, there is no obvious reason. As I could possibly change the color of the text in the header row, but it took about five tries and I swear to you that I didn't do anything different the fifth time compared to the first four.
The only thing I've done in the meantime was to create a cell style.
What might make the difference here, and more importantly, what can I do about it?
There are a few things that I usually do by bringing Excel worksheet data that do not seem to work properly. Before you apply styles, or styles of table cells - delete all replacements.
- Select the Table.
- In the Panel of cell Style, click the clear overrides in selection button
- Then in the Panel Style of Table, do the same and start applying table or cell styles.
Usually makes things less capricious ;-)
CARI
-
The user cannot see the tables
Hello world
I have a form where I can see all the data, run a query, but today, I created a new user, but when I run the same form, I'm not able to see all the data. Also, I went to sql and connected with the Preobrajensky of this user and when I run the following:
I'm not able to see the tables I created with the other user.Select * from cat;
Can someone help me please?Yes, grants and synonyms must be done for each table.
-
FM10 cannot generate the table of contents with main points
Hello world
I've read some useful discussions here on this issue but I still can not to be able to solve this problem of main points for my OCD.
I already assured that the reference for all my image in my book files have the same reference table of contents of the page entry page. When I generate my OCD the main points are missing!
I then, open the reference page for the TOC file and paste in the same entries of table of contents of my other image files and then update the book to regenerate the table of contents.
Also, this does not solve the problem.
Any help to fix this would be really appreciated!
Here are some screenshots of my reference page for my OCD (below). I have ensured that this section is present for all of the image files from my book too (in their sections of the reference page for the table of contents).
ChapterTitleTOC
Heading1TOC
Heading2TOC:
And my OCD generated
Open view - reference pages and search for all occurrences of
<$paratext><$pagenum>
remove the space between the tags, then press tab once, then make sure you that you have selected to view - toolbars - formatting to display the paragraph on the right-hand panel, then switch to design a so I don't see there you already have 5.76 tab stops then click it and make sure before that the vertical slider of creation is <$paratext>(it should be a sign of angular once you press tab) |<$pagenum> then Now click on your 5.76 and change of play left to right or CHANGE WIDTH see screenshot AFTER YOU press CONTINUE you need to update while paragraph sign for reference pages
-
Cannot change the table in a layer [was: another weird One]
I created www.ccahv.com with Dreamweaver MX and now seeks to update with Dreamweaver CS3. The buttons are in a table on a layer to easily copy, but I can't change the table to add a button. Impossible to insert an image. The pages are modified by a Secretary with Frontpage 2000. Who would have something to do with it. I am sure that I've updated these pages in June and October with the CS3 version. I am at a loss. Help!
joepd
[Subject line edited for clarity by Moderator]
First, fix the validation errors. You have the doctype declaration in the body.
> The buttons are in a table on a layer
Avoid layers unless they are necessary.
-
Cannot open the table of contents in the project manager
I import updates from my subjects and I use RH7. I was working also on the table of contents. I produced my output and had left the project, but when I came back later I can't open the table of contents now. I double click and nothing happens. I right click and select 'Edit' and nothing happens. Someone at - it advice?
Thank you
Mike
Hello
Maybe try clicking on File > Load Default environment?
Then try opening the table of contents.
Maybe something went wrong with the placement of the table of contents Editor.
See you soon... Rick
Useful and practical links
-
Problem with the role and the user; the user cannot see the table
Hello forum,.
I created a role:
Enr_service CREATE ROLE;
GRANT CONNECT TO enr_service;
GRANT ALL ON tenants TO enr_service;
GRANT ALL ON enr_service TO user;
GRANT ALL ON sportsmen TO enr_service;
GRANT SELECT ON test TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED on USERS;
GRANT enr_service to ENR1;
ALTER USER ENR1 by DEFAULT ROLE enr_service;
ALTER USER DEFAULT TABLESPACE USERS ENR1;
I can connect to the database with this user, but when I try to query a table that has been granted access I get an error message:
SELECT * ATHLETES;
ORA-00942: table or view does not exist
I don't see what I did wrong. Any help is appreciated.
Sebastianuser2019788 wrote:
Hello forum,.I created a role:
Enr_service CREATE ROLE;
GRANT CONNECT TO enr_service;
GRANT ALL ON tenants TO enr_service;
GRANT ALL ON enr_service TO user;
GRANT ALL ON sportsmen TO enr_service;
GRANT SELECT ON test TO enr_service;and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED on USERS;
GRANT enr_service to ENR1;
ALTER USER ENR1 by DEFAULT ROLE enr_service;
ALTER USER DEFAULT TABLESPACE USERS ENR1;I can connect to the database with this user, but when I try to query a table that has been granted access I get an error message:
SELECT * ATHLETES;
ORA-00942: table or view does not existI don't see what I did wrong. Any help is appreciated.
Sebastian
This is probably because ENR1 isn't any table named ATHLETES and he did not qualify the name of the table with the schema name...
Maybe you are looking for
-
I built version 8.2 of exe
Hello I have the version of labview 8.6.1 on my PC. I had vi and his exe, which is developed on labview 8.2. My question is, how do I build this old exe 8.2 version labview 8.6.1 in exe? Thank you
-
try to install the Windows Imaging Component gives error on update.inf
I try to install wic_x86_enu_exe it is not install and give the file update.inf error please help
-
Re: dv6 3052tx - Core i7 cpu limitation
HI there, I had my dv6 3052tx core i7. After that I installed Win7 x 64, the system cpu strangles at 70deg itself and all my application hangs up... Base speed down from 931 to 130 and the mulitlpier down from 7.0 to 1.0 (monitored by cpuz)... Pls I
-
Windows Vista does not recognize the graphics card and the broadband
Original title: recognize the graphics card and the broadband connection Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop
-
Hello I have a HP Officejet 6500 has more and 2 Macs recently updated to the Mavericks. My laptop has already had the drivers installed and I used the HP ASNA utility (which although buggy was OK). My office has never installed the drivers manually.