Cannot eject disk HARD of Portable Buffoli

Similar Questions

• Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

  Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have attached the log file and the list of files in the folder of servers.

  Any help much appreciated.

  Welcome to the community,

  This virtual machine successfully powered on since July 23?

  To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

  If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

  replacement of

  scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

  with

  scsi0:1.filename = LHMU - VIC04_1.vmdk

  then right-click on the vmx file in browser data store and add it to the inventory.

  Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

  If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

  If you are not sure, please post back before doing anything.

  André

• cannot eject external hard drive with Aperture library on it

  Hello

  in recent weeks, I can't eject a hard disc with the Aperture library on it. A dialog appears saying that an Application is still in use, but opening is closed and there is nothing else on the external drive (Seagate 2 to).

  Yesterday, I moved my library on a Lacie Rugged drive. Always the same question.

  What could be the reason for this?

  Eddd you change Aperture preferences recently? Perhaps the preview preferences or XML part?

• Cannot eject external hard drive USB

  Original title: problem ejecting usb mass storage device

  Hallow

  I have a WD drive and when I try to remove it safely I get the following error:

  "the application".

  '\Device\harddiskvolume4\Windows\System32\svchost.exe' is

  This device can be stopped. Close the application and

  then try to stop the device again.

  p. s.

  I have important data on this disk

  This error does not occur with any other usb

  I tried the Task Manager

  throws his mercy on me I'm not a computer genius and

  my English is not the most brilliant as you have probably noticed

  Thank you to everyone willing to help

  Itay

  Hi Itay,

  Thanks for posting on Microsoft Community.

  I understand that you get this error "the application \Device\HarddiskVolume4\Windows\System32\svchost.exe prevents this device to be stopped. Close the application and then try to stop the device again. "Whenever you try to eject the external hard drive.

  You may get this message if Windows was started with the inserted disc. Try to wait until Windows is completely loaded before inserting it, then if you try to eject it doesn't work.

  You can try the suggestions below and check if it helps.

  1. Download Process Explorer from the link below http://technet.microsoft.com/en-us/sysinternals/bb896653
  2. Click search, find handle or DLL (Dynamic Link Library) in the tool menu.
  3. Type the drive letter of the USB device in the handle or DLL substring text box and press the search button.
  4. Find the process and its PID (process identifier) in the following box.
  5. In the tree of the system process, find the process according to find it handle or DLL dialog box.
  6. Press Ctrl + H to display the handles in the view in the lower pane.
  7. Search for the file by the drive letter and right click, choose Manage close.

  Reference:

  Problem ejecting USB mass storage device

  http://support.Microsoft.com/kb/555665

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to contact us for any further assistance on Windows.

• Portege M400 - XP Setup cannot detect any HARD disk

  Hello world

  I have everything, what I can and can't try. During the Installation of Windows XP cannot detect any HARD disk.

  PORTEGE M400 PPM40E-0DG0253I
  BIOS 3.8

  Installation of Vista properly with RAID, but XP installation drivers won't work for all that. I try a lot of drivers (versions even for Vista), with integration of nLite, with SD-start 16-bit back, DriverPacks. I bought no change - disk-USB, the laptop cannot see HDD. I try also with the USB-SATA external enclosure, but this without success, but I can see the HARD drive

  Any ideas?

  Somehow you lack driver SATA.
  Very good description how to prepare the CD of facilities, you can find HERE.

  This Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions please let us know.

  Good luck!

• Satellite A200-1AE cannot find my disk hard flash

  Hi to everyone.

  I have a SATELLITE A200 1AE and I have a little problem...
  My phone cannot find my disk hard flash. I contact toshiba here in Greece, and they told me that they don't know what to do!

  Can you help me please?

  THANKS ANYWAYYYY

  Hello

  Can you please write a little bit more kill your issue? Since when you noticed this problem? What did you do last time? Maybe installed WXP and now the HARD drive is not visible for the BIOS or does not appear when you use F12 at startup?

  Please write a little more. I don't think that the service can't do anything.

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• Windows XP Setup cannot find a HARD disk

  I started to configure Windows XP from CD, but the installer is message that it cannot find the HARD drive on my computer. But the Windows Vista boot configuration process, it's average, this disc HARD work well. How can I solve this problem?

  * @ Periklis *.
  This has been discussed a lot of time here in the forum.
  You need SATA drivers to install Windows XP

  I recommend looking for some discussion here in the forum; Search, read and learn

  Tip: the SATA drivers are part of the Intel Matrix Storage Manager

  Good bye

• replcement oprerating systems new hard disks in computers portable exuisting

  do I have to buy 5 operating systems for the five used laptops, I bought that had windows in them before removed theey disks hard or microsoft will replace ssystems operation for free

  No, Microsoft will not replace the free operating systems.

  You can try contacting the manufacturer of OEM recovery disks. They may or may not have at their disposal according to the age of computers. Expect to pay a fee.
  Otherwise, you can buy OS for them. Use due care, that they are too old to modern operating systems work. An alternative would be open source that are free.

• cannot disconnect usb hard drive external, impossible to use "remove" to eject from my hard drive

  I have windows 7 using a new drive external hard usb. I am unable to use "remove" to eject my hard druve it says windows can not stop your device generic volume beak a program always uses this even tho I did open or running. If I pull the unit I have at high risk to mess up the data on the external hard drive.

  WolfgangSlany,

  I suggest you run the Hotflix from the link and if it helps.

  http://support.Microsoft.com/kb/931619/en-us

• Satellite L450 - 173 BIOS cannot detect the HARD whil eLinux disc that ubunto can

  I have a Satellite L450 173.
  The system will display a failure while trying to detect the hard drive then cannot boot from the hard drive.

  However, it can boot from the CD and install ubunto 11.04 (with barrier).
  However, after the success in the installation process, the system cannot start...
  Is this a Bios problem that require an update?

  Hello

  * Question: *.
  Either classified and recognized in the BIOS HARD drive?
  On the first page of the BIOS disk HARD should be listed with details such as the name and the size of the HARD drive.

  If his list, then you must run a HARD drive test. You could test the HARD drive by using a freeware tool called Drive Fitness Test.
  This tool is free and can be downloaded from different pages
  To do this, and if there is error, it means that your HARD drive is malfunctioning.

• Bootcamp - Windows 10 should not see or read files from the disk HARD Apple intern.

  I have just successfully Windows 10 next OS X on my 15 "Macbook Pro mid-2014.

  Windows 10 should not see or read files from the disk HARD Apple intern.

  Should which driver I uninstall?

  On OSX, if the following Terminal command produces any output, then you cannot read partition OSX on the side Windows? FileVault2 will also disable access to the OSX partition.

  Cs diskutil list

• Office of Toshiba Canvio disk HARD 3.5 "3 to Win 7 backup error 0x8078002a

  I have just purchase a disk HARD 3.5 "3 TB canvio office

  Windows 7 backup and restore utility do not reach success any time, showing the 0x8078002a error.

  I have read and wasted enough time to notice that I will not be able to find the solution in the web.

  I bought this HARD disk as backup media for Windows 7 backup and restore utility, exclusively

  I need a solution.

  Thank you.

  Hello

  Are you able to create and save the backup on the internal HARD drive?
  Check it!

  The 0x8078002A error may occur because the physical 4 k. sector size I read that the utility Windows 7 backup and restore has some problems with readers supporting the logic of 4 K sector size.

  CIHI details:
  http://support.Microsoft.com/en-us/KB/2510009

  If you use a reader of logical sector of one size other than 512 bytes, System Windows image backup, and restore operations may fail, and you receive the following error message:
  + One of the backup files could not be created. +
  + Details: The request cannot be performed because of an i/o device error. +.
  + Error code: 0x8078002A +.

  If you use the drive external HARD as part of the Windows 7 backup and restore, you can buy a HARD drive supporting 512 bytes per physical sector

• Since the upgrade to El Capitan can eject disks

  I find myself unable to eject the hard disks and flash drives. I'm a photographer and I regularly load for clients flash drives, this is usually a fast CAP, copy photos, eject, and move on to the next thing.

  I can't stop my MBP whenever I need to eject a flash disk, it's incredibly frustrating and frankly disappointing that this has not been picked up in tests.

  Say this has to do with the projector, but I don't really like what it has to do with people, this isn't a solution complicated, is this still going to be sorted?

  I have the same problem and it's really a lot of time. The Mac said that the Finder uses the external hard drive. I tried to restart the Finder, but that makes no difference. All I can do on the other that the ejection Force is stopped at the Mac, disconnect the drive, and then turn the Mac. It is ridiculous to have to do several times a day.

• Compaq presario v6000 v6409tu disk hard bios self-test fail

  Hello

  Windows xp no my pc compaq v6000 not starting and bluescreen showed a couple of times. I ran the BIOS (phoenix) disk hard diagnosis and the test failed. When I opened my HDD I noticed green rust as deposits into the connector on the hard drive. After cleaning with a brush, computer loaded XP successfully. But an hour later, while I was surfing in mozilla suddenly the mouse pointer started late and showed computer blue screen saying that windows has been closed down to prevent damage.

  I would be grateful if someone can tell me if it's a software problem or hard drive error. If I need to replace my hard drive, what are my options, for example. rpm, capacity, provider? Thank you.

  The only way you could have rusted copper into the connector on the hard drive is if liquid got in there so I am reluctant to try to speculate how much damage has been done. I remove the hard drive and connect it to the outside to another computer and run chkdsk on it to see if the drive itself is bad. As long as there is a problem on the part of connector and the interface with the motherboard cannot really trust the onboard hard drive Diagnostics. You could also get an own another new hard drive adapter.

  http://www.eBay.com/ITM/new-Compaq-Presario-C700-F500-F700-V6000-SATA-laptop-hard-drive-connector-/161297513053?PT=US_Drive_Bay_Caddies & Hash = item258e14ba5d

  If it does not turn on the hard drive is bad, you can replace it with any laptop SATA drive no more than 9.5 mm thick.

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  Above is a good thing. It is slim (7mm) but it will still go into the caddy and connect to the motherboard with the connecting piece. If the hard drive itself is always good, and you replace the connector piece but he always bluescreens, so I would not spend money on a new hard drive. I would say that there was damage to the motherboard.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.