Cannot enable the streaming media to other devices on my network?
When I try to install Media Streaming on Win 7 Home Premium 64 - bit, using Control Panel/Network Sharing Center/Media Streaming Options, I find the following strange problem. The "show devices on:" drop-down list has no content and does not allow me to select anything. On my Win 7 wife's computer, this dropdown allows of me selcet is "all networks" or "local networks". I discovered this error when I bought an XBox 360 and setup of Windows media Center on it. Windows Media center on the XBox can connect to my PC and play all the music in my library of music through Media Center, but the XBox can't find my pc on the network using the music library or picture library. My PC does not list the XBox when I "see the network computers or devices", but nor does my wife's PC.
I am confused as to how my XBox has been so easily connected to my PC and continues to work perfectly in the application of the XBox, Windows Media Center, and still fails to find my PC or browse its contents through its other music/photo/media applications.
I have no problem connecting to XBox Live or on the internet.
Any ideas?
Hello
Follow the steps described in the links below: reading your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-US/windows7/Stream-your-media-to-devices-and-computers-using-Windows-Media-Player
Change settings for streaming media in Windows Media Player: http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player
Also, you can try to temporarily disable anti-virus and check if you can get the opportunity to play and play on your Play Station 3.
Share you must have under 'Network and Internet' a 'homegroup' set in place with share pictures etc. with controlled devices. You must also have under 'Network and Media Center' 'share with media devices' network Local set to "allow all". You can easily access these via WMP12, if you look under the drop down menu "share", it's the two base units, just select those to go to the relative Panel.
All the media you want to share must be stored in the folder 'Libraries' relative to the topic. For some reason, videos are available to select the "folders" on the PS3, if you select 'All videos' only the recorded TV shows samples sample wtv file, which
It will be useful.
Tags: Windows
Similar Questions
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.
I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have. The long, everything went well, except for the audio part.
Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device.
I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there! When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.
BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD. Thanks for any help on this, jim
Hello
Please follow the steps from the link below.
http://support.Microsoft.com/kb/310123
I also suggest you to install the drivers from the Dell site.
http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.
Hello
1. were there any (hardware or software) changes to the computer?
Run the FixIt and check if the problem is solved or not.
Your CD or DVD drive cannot read or write media (Fixit)
Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)
Hope that helps.
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Original title: CD/DVD drives do not work after upgrade from XP to Vista
I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work. I also tried two external drives, same thing. I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers. Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd! Am tearing my hair!
Hi krt2,
In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load
You can try to uninstall and reinstall the driver for the device to solve this problem.
Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:
a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.
c. on the device properties dialog box, click the driver tab, and then click on uninstall.
d. restart your computer.
Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.
See the links below for more details on the update of drivers:
Updated a hardware driver that is not working properly
Also, read the following article and check if that helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Original title: Audio recording sound recording microphone
Hey, if I get this message:
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xWhen I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff
There are several models of m6 ENVYENVY m6 -?
This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)This is a link to the HP support site to download driversAnd this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problemsLooks like something to remove the registry entries for the driver -
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Running Server 2003, Web Edition SP2 Build 3790.
The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.
Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports. pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58
Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads
Diana
Microsoft Answers Support Engineer
-
Audio loss. Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Tried to update driver and restore without success. Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it. Restored to an earlier date but still what system did not go. Tried to uninstall and reinstall the driver. Uninstall was successful but reinstall it read that the hdaubus file does not exist. I'm a computer dunce. Any help out there?
Hi BarbaraWolfe,There are many causes of Code 39 errors:
- A required device driver is missing.
- A required binary file is corrupted.
- There is a problem with the file I/O process.
- A driver that refers to an entry point in another binary file cannot load.
Re-install the driver by downloading it from the link given:Additional reference on:Check if that helps. -
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
Maybe you are looking for
-
iPhone 6 + iOS 9.3 update failed
I had accepted this update of the iOS 9.3 software on my iPhone 6 + (since iOS original 8.x) yesterday, but it failed and stopped about 95% of the toolbar installation. Apple service advised to connect with iTunes and install again, she then appeared
-
Satellite A300-24z - VAP - illuminating buttons does not work properly
Sorry for my English. I have laptop Satellite A300-24z, model number PSAG8E and Vista 32 bit. I try to install this driver and hit numbers are not having a light.I try to do this 3 times and still does not work.Can someone help me?
-
Hello I have a compaq CQ58-201SU. What happened: I tried to reinstall windows. Current vesion was Win8. New Windows disk is Pro 8.1. It gave me an error message saying the following: "Windows cannot be installed to this disk. the selected disk is a M
-
I would like to illustrate the effects of the differences on the amplitude, frequency and phase between two sine waves. I already used the sinus function and works well without phase variations. I tried to use the sine wave as planned in the signal g
-
Hello! My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group. Now, I can't even as much as screen (with the blue bar and the Windows logo). I tried the following: (a) via the Windows Recovery Cons