Cannot encrypt files with fingerprint reader

Similar Questions

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• recovery of preloaded HP Client Security Suite for 455 G1 laptop with fingerprint reader

  have a HP ProBook 455 G1 with fingerprint reader. Due to him having to replace the failed hard drive on the laptop, I had to use the support of recovery to re - install Windows 7 Professional 64 bit on the computer as well as all the drivers and other software that has been included on the recovery disks. However, I was not able to get the version of the HP Client Security software that is listed on the support page and downloads to install correctly. I was wondering if there was a link or a way to find another copy of the original version of HP Client Security that came pre-installed on the system. For more information, the number of product for my laptop is F2R65UT. Any help or assistance that can be granted on this issue would be greatly appreciated.

  Thank you

  Blades4119

  It is a follow-up to the above post about the G1 455 ProBook with fingerprint reader. Whenever I try to install the security software, it keeps giving me an error code (error code 101). This code requires the installer to roll back and does not allow the software to install. I don't know if this helps much to find a solution to the issue. Any help you can give me on this matter is greatly appreciated.

  Thank you

  Blades4119

• Windows 7 & MS keyboard with fingerprint reader

  Hi - running Win7 Ultimate - clean install - I have the Microsoft keyboard with fingerprint reader - anyone know if this is supported (fingerprint reader that is - not only the keyboard) and if not, MS have plans to support it and when?

  Mike

  Thanks for your reply. I am running 32-bit. IntelliPoint s/w is available for the item of keyboard, but just what is fingerprint reader (which requires the persona digital s/w) is not supported under win7. I refer to my question above - does anyone have an idea if MS will support it in the near future or the product of by MS fingerprint reader is a lost cause.

  AFAIK, there is no intention to provide the software for this device for Windows 7.  For more information, you can try to contact the number here:

  http://www.Microsoft.com/hardware/support/FingerprintReader.mspx

  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Microsoft Optical Desktop with Fingerprint Reader 114Key keyboard

  Anyone know if Microsoft Keyboard with fingerprint reader works with windows 7.  Microsoft will make windows 7 drivers available for this product.

  Anyone know if Microsoft Keyboard with fingerprint reader works with windows 7.  Microsoft will make windows 7 drivers available for this product.

  It does look like it, which is a real shame.  You would think they would at least be port their own material in their own operating systems.

  The keyboard still works, but the fingerprint reader becomes heavy.
  I have 3 computers in my household - 2 of them have this keyboard, and the stand-alone MS fingerprint reader.  All useless with Windows 7.
  I liked these fingerprint readers and am desperately looking for a replacement.  In my humble OPINION, they allow a new level of security, because you're not tempted to use the same user name and/or password on all websites and not tempted to use weak passwords that are easy to remember.
  Just got 3 Solo Eikon fingerprint readers yesterday, but continues to play with them.  It looks promising, however.

• Microsoft keyboard with fingerprint reader

  I replaced my old book of WinVista (now deceased) with a new Win7 laptop running.  Attached to it, is a Microsoft Keyboard with fingerprint reader.

  This keyboard / worked beautifully with WinXP Pro and WinVista Ultimate fingerprint reader.  The keyboard even works with Win7; However, no amout of effort don't give me the once fingerprint reader feature more.

  DigitalPersona said talking with Microsoft ~ Microsoft says that it is on their site. However, when I go to the web page of keyboard with fingerprint reader, it offers only WinXP and WinVista... of solutions that don't work with Win7.

  Wise words of wisdom are also well used & popular with gratitude ~ thanks!

  Ray White
  Semper Fi!

  "BonsaiSun" wrote in message News: * e-mail address is removed from the privacy * .com...

  I replaced my old book of WinVista (now deceased) with a new Win7 laptop running.  Attached to it, is a Microsoft Keyboard with fingerprint reader.

  This keyboard / worked beautifully with WinXP Pro and WinVista Ultimate fingerprint reader.  The keyboard even works with Win7; However, no amout of effort don't give me the once fingerprint reader feature more.

  DigitalPersona said talking with Microsoft ~ Microsoft says that it is on their site. However, when I go to the web page of keyboard with fingerprint reader, it offers only WinXP and WinVista... of solutions that don't work with Win7.

  Wise words of wisdom are also well used & popular with gratitude ~ thanks!

  Ray White
  Semper Fi!

  If there is no Win 7 drivers for the MS fingerprint reader or the manufacturer of the drive then Win 7 will not be able to use this feature.
   
   

• You can compress files with Adobe Reader DC?

  You can compress files with Adobe Reader DC?

  N ° you need Acrobat for that.

• When I tried to open the bought one of the files with Adobe Reader purchase ebook, he said Adobe Reader could not open ' URLlink (2) .acsm ' because it is not a type of file supported or because the file has been corrupted (for example, it was sent

  When I tried to open the bought one of the files with Adobe Reader purchase ebook, he said

  Adobe Reader could not open ' URLlink (2) .acsm ' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  Adobe Reader can open PDF files; for the .acsm file, you need Adobe Digital Editions.

• Is it possible that the encrypted file can be read on another computer?

  Original title: can I send encrypted file

  Hello!

  I just want to know that in windows 7, if I've encrypted by bitlocker and I sent this file that is located on the bitlocker drive after opening it by entering the password by car. so if I send this file to anyone, may be able to read this file? pls let me know this.

  Concerning
  Fahed

  Here is a very quick way for you to discover:

  1. Create a Hotmail account.
  2. Send the file to this account.
  3. See if you can open it.

  Your question suggests that you are not completely familiar with BitLocker. If Yes, then you must run this very simple test that many people forget to run:
  1. Pretend that your hard drive crashed this morning. It is now completely illegible.
  2. Take your backup drive to another PC and check if you can open your encrypted files.

  If you can't, you must review your backup strategy and how to treat the encrypted files.

• Win 7 slow start - connection with fingerprint reader

  Hello

  I have a T400s (2.4 GHz and 4 GB) with an Intel SSD and WIn 7 RTM with the last drivers beta of Lenovo.

  I have the fingerprint reader enabled for the connection and my startup time of 35 seconds is now shared almost half in the connection of fingerprints and the other half in the rest of the startup procedure.

  Or (the finger) described another way if the machine is turned off and I slide my finger to start the machine, it takes about 17 seconds before the fast logon is indicated.

  Then the machine says 'pending' for 15-20 seconds during which my personal connection icon is flashing by until it ends the connection and almost immediately displays the desktop.

  I am surprised by the very slow connection with my finger already slipped. It would be much faster to turn off fingerprint reader and connect using a password. Someone had this problem and knows how to fix?

  Other problems with the boot, I found (and fixed) is the use of a solid as the Windows background color which, for some reason, costs about 15 seconds at boot time! I also had to reflash the firmware of my SSD to win 10 extra seconds at the beginning of the startup procedure.

  Carpet

  Hello again,

  Sometimes I had to wait several seconds after sliding my finger, to the process of connection of kick. I checked the event viewer on my thinkpad T400 and found the security processes that are at work when loggin. I have excluded them from protection against viruses (Microsoft Security Essentials) and restarted the computer. When the logon screen appeared, I spent my finger and boom, the connection process began immediately.

  Excluded processes are:

  C:\Windows\System32\LogonUI.exe

  C:\Windows\System32\winlogon.exe

  JES

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• Cannot open files with the EXTENSION of the PPT FILE

  I can't open a file with the following extension using PowerPoint ppt. The message below is what I get-

  The selected file is not a valid Microsoft PowerPoint file. It may be a file created by another program.

  Try by double-clicking the file in Windows Explorer to see if another program opens to it. If PowerPoint opens again when you double-click the file in Windows Explorer, it is possible that the file is not a PowerPoint file, but its extension has been renamed to be that of a PowerPoint file type registered (for example, .ppt, .pptx, .pps, .ppsx, .pptx, .pot or .potx) but the file is not a PowerPoint file.

  To determine which program can open the file, try one of the following:

  • Contact the original author (if known) to know what program you used to create this file. Then rename the file with the correct extension so that it can be opened by this program.
  • Try opening the file in other programs.
  • If you or someone you know, are very knowledgeable about software, review the file header in a text editor to determine which program can read the file.

  Another possibility is that the file has been damaged during transfer from another computer. Trying to transfer the file again.

  The file may be damaged. If you have a copy of the file backup, use it. It is not possible repair corrupted file.

  Hello

  see if this applies to your problem

  you don't say what version of Microsoft office powerpoint, you try to open it with

  read below link information saying that you have need of powerpoint 2010 or other programs listed for ppt file extensions

  http://www.FileInfo.com/extension/ppt

  	Microsoft PowerPoint 2010	Info
  	Microsoft PowerPoint Viewer	Info
  	Nuance OmniPage 17	Info
  	ACD Systems Canvas 12	Info
  	Corel WordPerfect Office X 5	Info
  	OpenOffice.org

  If you have an earlier version of powerpoint read this

  Install the compatibility pack if you want to open, edit and save documents, workbooks, and presentations that were created in newer versions of Word, Excel and PowerPoint. Scroll down to see the instructions and system requirements.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=941b3470-3ae9-4aee-8f43-c6bb74cd1466&DisplayLang=en

• I get this error when I try to open a file with Acrobat Reader, it is said: Adobe Reader could not open "heels 2014 001.bmp" because it is not a type of file supported or because the file has been damaged (for example: it is sent as an email to)

  I get an error msg when I try to open a file using adobe reader software.  Error States: Adobe Reader could not open ' heels 2014 001.exe bmp because it is not a supported type, file or because the file has been damaged (for example: he was sent as an attachment to e-mail and has not been decoded correctly.).

  
  

  I tried to send an email with attachments 44 and would not send the email. Ever since I tried to send this e-mail, I have been doing the error msg.

  
  

  Anyone know how I can get this to work for me again?

  
  

  Thank you, any help is greatly appreciated.

  
  

  JoJo

  The file you are trying to open is (you can see from the name) a BMP, PDF files no file. Adobe Reader can only open PDF files, just so stop trying to open it with Adobe Reader. The app, users of Windows for BMP files is painting.

• From a PDF file with acrobat reader of Director 11.5?

  Hallo,

  Can someone please help with these scripts?

  "

  on mouseUp me

  _player . Open () "PDFs\Promise_Poster.pdf",'Adobe Reader.app'( )

  end

  on mouseUp me

  _player . Open () "PDFs\Promise_Poster.pdf" "AcroRd32.exe" ()

  end

  "

  I want to start a pdf that is located on the CD-ROM in the folder of PDF files.

  I'm doing a mac projector and a pc projector.

  The mac starts the reader, but does not load the file.

  The PC these nothing.

  I try this on a PC

  on mouseUp me

  _player . Open ("' () 'PowerPoints\Masterstory_2009.pps' ' pptviewer\ppview32.exe '( )

  end 

  This works because I have the application pptviewer on the CD.

  Please help a starter to the Director what am I I am ore wrong I have to solve another way.

  Thank you

  I suggest you download a copy of Buddy API - it's a xtra you can add to your projector. It's baOpenFile() method then allows you to open your PDF file. Please read the docs that come with the xtra and the section of the help file of Director on the films of packaging for distribution.

• Cannot download files with plupload using Firefox 7 / Aurora (beta)

  I'm unable to download a file (using drag - move OR select file) with plupload and Firefox 7.

  Everything worked fine with Firefox 6. When I try to download a file with plupload, firefox thinks I'm trying to install an extension.

  http://www.Plupload.com/

  I had the same problem. Today, I upgraded to the latest version of Plupload and now it works again!