Cannot export to framemaker graphic element

Similar Questions

• Different States with buttons as graphical elements

  Hello! I have a few graphic elements and want to make them with different States, that is active buttons and hover. But I don't see any possibility to do. When I change the State of an item and try to replace the image it replaces in all. I can't believe that this single feature could not be carried out. Thanks in advance for all versions to solve!

  Because we're changing CSS with different States, you cannot change the src of an image. Instead, you can get what you want to do the following:

  1. draw a box to the size of your desired button.

  2. Add a default background mode image.

  

  3 move to something like 'stationary' and then change the source of the background image.

  

  When you preview your design, you will see that the background image changes with the hover.

  Hope this helps,

  Joan Lafferty

• Cannot export, asking for subscription

  I just bought adobe pdf export, but when I try to convert a word file,

  He has sent me to the payment page and tells me to upgrade. I am connected to my account, and it shows I have the product

  Hi maryt84224028 ,

  Could you please let us know how you use Adobe PDF - Acrobat Reader services or via a Web browser?

  Also, visit these links that deal with the same issue:

  Cannot export the PDF file into WORD Doc (that I just bought) system allows me to choose which PDF file but is grayed out in the area where is located the "Convert" button - so no activity.  I want to be sure that my order was confirmed the e-mail address of constanc w

  I just bought Adobe export in PDF format, but I have yet to convert my .pdf document to MS Word.  I have a PC

  Thank you

  Shivam

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• Export in Adobe Premiere Elements 11 error

  Hello everyone,

  I am currently trying to export a movie in Adobe Premiere elements 11.

  Whenever I'm trying to export anything in Premiere Elements, I get the error message "error compilation of film. Unknown error. "happen.

  I had two videos export before, which one has been exported in an avi file, which has no sound, the other has been exported as an f4v file and all the sound was static.

  I looked at the discussion about multiplexing and it did not work.

  Thank you.

  AdobeFilmmaker

  To complete, please consult the document Adobe Premiere Elements and "compile errors.

  Resolve the compilation error when rendering or exporting from Adobe Premiere Elements.

  We will follow your progress as your schedule allows.

  Thank you.

  RTA

• Why 'only' my flash Adobe CS6 profession cannot export avi. file?

  Why the flash Adobe CS6 profession cannot export avi. file?

  but when I look at the Youtube video, there are avi file format option in CS6!

  Can someone help me?

  WHY?????!!!!!!!!!!!!!!!!

  

  

  Flash uses the Adobe Media Converter to create the video output. If you select the option "Use Media Converter" after selecting out of Quicktime, and, if your computer has the AVI codec installed, you should be able to export to an AVI file.

• first elements13 cannot export mts2 (AVCHD h.264avc) 1920x1080p 50 fps? only 25 fps?

  IM Explorer that my new program and some things are seems to be disappointing:

  Al always pre-Assembly im film parts. cut, then clean of useless images. and rename them to keep you in the order of shootingtime for editting furter to a stand-alone movie or / and placing the smal between logial movieparts order to photography and this export to a presentation.

  It was the main gool buy photoshop and first pack.

  But for some reason, I can't export the edit parts in the same quality as source (no rendering necessary)

  The max quality I can find is 1080p25 fps... ! (AVCHD file. So I lost 50% of my material!

  It's not funny more

  Should I go see in the wrong places or is it something that adobe must be added first elements?

  Spike29

  There is no export at the Premiere Elements file (any version) for an extension of the .m2ts file. (I think that is what you mean when you wrote .mts2).

  There are exports available with .mts file extensions in Publish + Share/computer.

  Under opportunities .mts, like you, I don't see the ability to export to a file with a 50 progressive frames per second image.

  However, if your workflow is not restricted .mts, then I suggest you look at

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 H.264 1920 x 1080 p 25 and personalize than pre-set to MP4 H.264 1920 x 1080 p 50 cents label advanced video button of the preset.

  Have you been there and done this or particular need of a file with an extension of .mts or .m2ts file? If this is the case, we could explore the .mp4 road and rename the extension of export file?

  The above should give you excellent quality results.

  RTA

• Problems to export HD of first Elements 9 for Vimeo video (program plant or video is fuzzy)

  I have a 10-minute wedding video I am trying to export from Adobe first Elements 9 for download on vimeo. I followed the instructions in this video: export to upload to Vimeo with Adobe Premiere Elements on Vimeo for how to proceed. The first time I followed the instructions, the video file that results is fuzzy and blurry, not at all like HD video, I could see in the program prior to export. Since then, I tried to export several times with different parameters, and every time the program crashes when the video is approximately 95% complete. How can I correct this situation? It is a wedding video that I made for a paying customer who would like their video on vimeo as soon as possible.

  Thanks for your help!

  Let me know if you need more details or clarification.

  Laura

  Laura

  Sorry about that. I thought at first Elements 10, when you posted clearly whether you work with 9.0.

  It would seem that we are OK with the project preset

  NTSC

  DIGITAL SLR

  1080 p

  Digital SLR [email protected]

  for your import AVCHD or H.264.mov.

  In the Premiere Elements 9.0/9.0.1 share/calculation/QuickTime

  = NTSC 16:9 DV presets

  and as for the customization tab Advanced Settings button/video

  I'd go with the frame width 1920, frame height 1080

  and I would increase the flow according to the guidelines of Vimeo

  Guidelines of compression on Vimeo

  Even if you were to stay at 1280 x 720, I think that your flow of 5000 Kbps setting is too low. If you stay with 1280 x 720, I would

  Watch the kbit/10,000s to the value ' limit bitrate to. " If you go with 1920 x 1080, I would look at 10 000 to 20 000 Kbps, probably closer to 20 000 kbit/s.

  First determine if these bitrate increases have no effect on what you are looking for. Then, we will focus on the size of the file. Are limited to a given file size?

  Superior throughput, more quality, more the size of the file. You need to find a good compromise between bitrate, file size and quality.

  As a point of reference, which is the bitrate of the video that you import into the project? I saw a Canon T2i video sample that used something like 42 Mbit/s (megabits per second), in contrast to 5000 kbps (kilobits per second), which would be of 5 Mbps.

  Please review and consider.

  Thank you.

  RTA

• LR4 - cannot export error

  When I export pictures of the LR4 to a folder on the hard disk, I get the following error message:

  Cannot export

  An internal error has occurred: Win32 API error 2 ("the system cannot find the file specified.") When you call ShellExecuteExW of AgWorkspace.shellExecute

  Export photos and are located in the folder I chose.  I'm under 64-bit Windows 7.  Any ideas on how to remove the error message?

  This probably means that the "Post processing" field at the bottom of the Panel export is empty (default should be 'Do nothing'). This has cropped up a few times since the start of the beta LR4. Just enter a valid option and the error should disappear.

• Cannot export the EPS or HAVE as TIFF

  Cannot export in EPS or HAVE as a TIFF. Error message that "combination of the size of the work and the resolution exceeds the maximum that can be rasterized.» But the work plan is only 50 cm x 5 cm B & W I use AI CS4. What should I do?

  Did you use guides or have what whether it of on the work plan and you precisely set the work plan use in the export dialog box. As far as script will, export in tiff format is not available, but the EPS option is.

• Acrobat adds a small graphical element when converting to a Visio diagram

  I have the diagram Visio multi-page (Visio Professional 2003) that I am trying to convert to PDF (Acrobat 3D Version 8) for distribution. I have forms with links pointing to pages these links seem to be converting correctly, bookmarks generate correctly and everything seems OK, except towards the end of the conversion process, Acrobat up a faint but noticeable graphical element in the upper left corner of each page (see image below). It is nowhere in the drawing and it occurs with several different designs.

  The object appears only when I converted using the "Convert to PDF" selection in the Adobe PDF menu. It does not appear when I create the PDF using the print dialog box.

  I can't understand what this thing or why Acrobat adds. Does anyone have an idea?

  Be consulted in PDF format at 100% Zoom:

  

  Partial object read in PDF format to 3000% Zoom:

  

  Hello

  You can try the following workaround right now:

  Just before the conversion of the visio to PDF file, go to the drop down list "Format-> Shadow-> Style" on and select ' 00: None' it. Then save and convert to PDF format.  Creating the Visio file, you can keep these settings that you want, but before conversion to PDF using PDFMaker, above given the configuration must be set to ' 00: None "."

  I hope this helps.

• Cannot create folders or other elements in the same drop-down menu in "organize bookmarks".

  Cannot create new bookmark files. 'Create a new folder' and all the other relevant elements that scrolls to organize the bookmarks are grayed out.

  I have exactly the same problem. Have not found the solution.
  21/07/10

• InDesign CC: Cannot export PDF in print quality

  InDesign CC 2015.3

  OS X El Capitan 10.11.3

  InDesign won't export quality of printing PDF or predefinied project. Earlier, as he begins to export, it gives a short error "PDF cannot be exported. I tried to remove some PSD-related images, and then only the export could be done without error.

  Any help much appreciated.

  for troubleshooting tips, see Adobe Community: file crashing on exit - print/PDF/other

• Cannot export PDF

  I use Photoshop elements 11. I can't export to PDF (via the menu export or save as...) I just installed the newest Adobe (DC) drive. Why does this work? I will not buy a newer Adobe photoshop.

  What operating system do you use?

  When you go on file > save under, you do not see listed in the drop-down list Format Photoshop PDF ?

  

• Cannot export the collection 6 Lightroom as a catalogue on El Capitan

  I can't export a collection of 6 Lightroom as a catalogue with photos and/or smart included previews. This includes the LR 6.2.1 and 6.1.1 LR. I check my permissions of files and folders, reset preferences and restored 6.2 to 6.1. I tried exported to many places and several discs. I also disabled the graphics processor 'use' in the performance preference menu.

  I am frustrated and out of options. All the solutions to this debacle?

  I solved the problem myself using KCPM utility Pro. It is a utility that can repair/reset the permissions of drive in El Capitan. My permissions on my boot volume must have stripped between move files to and from the boot volume to accommodate a new installation of El Capitan.

  Update:

  Also, I came across this post on MacTouch:

  http://www.macintouch.com/readerreports/security/index.html#d20oct2015.

  Rather than the KCPM utility listed above, it recommends to use the Terminal to repair disk permissions using the following command:

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  The article goes in discourge readers to download arbitrary compiled binary applications of the Internet and their execution of the Terminal.