Cannot filter Cluster using PowerCLI data warehouses

Similar Questions

• How to migrate a VM from one cluster to another cluster using PowerCLI

  When I run the command

  Move-VM -VM $vm -Destination $ResourcePool -Confirm:$false

  I am getting following error

  Move-VM : 19.7.2011 15:32:07    Move-VM        Destination is a Resource Pool owned by a Cluster, but the VM you are trying to move is not in that Cluster. Please select for destination a Host 
  in that Cluster or a Resource Pool owned by a stanalone Host.    
  At line:1 char:8
  + Move-VM <<<<  -VM $vm -Destination $ResourcePool -Confirm:$false
      + CategoryInfo          : InvalidArgument: (Flis:ResourcePoolImpl) [Move-VM], VimException
      + FullyQualifiedErrorId : Client20_VmHostServiceImpl_MoveVm_ResourcePoolOwnedByCluster,VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm trying to migrate VMS from one cluster to another cluster.

  I can perform this migration of vsphere, but not through powercli.

  Best regards

  The first shot must also have a data store setting.

  Move-VM -VM $vm -Destination $NewHost -Datastore $ds -Confirm:$falseMove-VM -VM $vm -Destination $ResourcePool -Confirm:$false
  

  Unless your data warehouses are shared between the 2 groups and you intend to keep these warehouses of data with the new cluster.

• [SRM 4.1] Dealing with local data warehouses?

  Hello

  I'm currently loaded with SRM 4.1 installation on our companys vsphere and while I did this before that I have never worked with VM on local data warehouses. There are three additional centers for both, I'll be tipping. These three data centers all run on Cisco UCS 210 M2 servers spread across two data stores. The virtual machine can be found on the second partition of the UCS VMFS.

  I don't know why it was created this way that I wasn't there when it was put into service (it seems strange, though, as they have a shedload of space on the Symmetrix). So I ask really (a person with a more experienced eye), what are the options for local data warehouses with MRS? I'm guessing limited to no support... so think I might watch svMotion

  Thanks for any advice.

  Hello

  With MRS. 4.1, the only option is based on the Bay of replication, i.e. SRM is only able to protect virtual machines residing on storage arrays supported with replication configured between them. SRM itself does not perform the replication. SRM is able to display your replica equipment and perform a few operations on the Bay of storage through the SRA (storage replication adapter) - software written by the storage provider.

  Yes, unless you use a storage device which can present these local data warehouses such as those shared and replicate them on the (and is supported with SRM), you cannot use local data warehouses. I have a limited knowledge of such things, maybe the other guys will be able to help more.

  In SRM 5 extra option has been introduced - vSphere replication, which allows the replication of virtual machines between ESXi hosts. You will need vcenter / SRM and ESXi 5 for this to work.

  I do not understand your configuration. How many centres of data do you have? SRM only supports the scenarios one to one, and many-to-one.

  Michael.

• Download Data Warehouse

  Hello, I need to use the data warehouse for a project and I would like to ask if there is
  another version (for example, the express edition including the data warehouse) except for the enterprise edition free.
  I installed Express edition, but were not the characteristics of the data warehouse. Can anyone help? Thank you.

  Hello

  So far, I know that you can download the oracle Builder as a Stand Alone software warehouse.

  http://www.Oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

  But you need the Standard version that you must buy if you want to use the Oracle Warehouse Builder for free (in Standard edition, it is included).

  I hope that it helps :)

  See you soon

• Data warehouses up-to-date for a pool of VMware using PowerCli

  Using this as a starting block.

  VMware View 5.2 Documentation Library

  I want to combine both functions and the variables to use ".txt files" with my new and old data warehouses listed.

  I edited a bit, combining both functions and variables for lists old and new creation, but I don't know about the context to provide variables for text files.  All PowerShell / PowerCli guru?

  # Function PowerShell to add new, then remove the old warehouses of data in an automatic pool.

  # UpdateDatastoresForAutomaticPool

  # Parameters

  # $Pool ID of the pool pool to update.

  # $OldDatastore full path to OldDatastore.txt to be removed.

  # $NewDatastore full path to NewDatastore.txt to add.

  $Pool = "C:\powercli\PersistentPools.txt".

  $OldDatastore = "C:\powercli\OldDatastore.txt".

  $NewDatastore = "C:\powercli\NewDatastore.txt".

  function RemoveDatastoreFromAutomaticPool

  {param ($Pool, $OldDatastore)

  $PoolSettings = (get-pool-pool_id, $Pool)

  $currentdatastores = $PoolSettings.datastorePaths

  $datastores = «»

  foreach ($path in $currentdatastores.split (";"))) {

  If (-not ($path - eq $OldDatastore)) {}

  $datastores = $datastores + "$path;"

  }

  }

  Update-LITERALLY-pool_id, $Pool - datastorePaths $datastores

  }

  function AddDatastoreToAutomaticPool

  {param ($Pool, $NewDatastore)

  $PoolSettings = (get-pool-pool_id, $Pool)

  $datastores = $PoolSettings.datastorePaths + "; $NewDatastore ".

  Update-LITERALLY-pool_id, $Pool - datastorePaths $datastores

  }

  Thank you

  -Matt

  You use literal strings instead of the content for the files. Assuming that the contents of the file is a list with one entry on each line, you need to change your code actually look at the data, for example:

  $oldstores = get-content "C:\powercli\OldDatastore.txt".

  foreach ($path in $currentdatastores.split (";"))) {

  If (-not ($oldstores - contains $path)) {}

  ...

  }

  }

• New analysis of data warehouses... at the level of the Cluster with PowerCLI 5?

  Hello

  Since vSphere has been provided (I think) the option to open a new analysis of the HBA on every host in the cluster ESXs is available in the GUI if you click with the right button on the cluster, select analyze again to data warehouses.

  I have read several threads from people requesting this option in Powercli but have not found a solution for this.

  When you do Get-Cluster-name | Get-vmhost | Get-vmhoststorage - RescanAllHBA to do this, the new analysis a host once in the cluster.

  Is there a solution for this now in PowerCLI 5.0?

  BR

  Henrik

  As far as I know, there is still no option to launch the new analysis across the cluster in paralel.

• Browse data using PowerCLI warehouses

  We have a large installation of VMware 5.0 in several data centers, clusters and hosts.  If we remove a VM from the inventory without noticing the datastore he resided on and the need to add it to the inventory, you must go through each data store and browse through each one of them.

  Is there an easier way to search for a virtual machine using PowerCLI or another method?

  Hello, AliSarreshteh-

  Yes, nearby.  Like writing your piece of code get all files with "DES084" at the end of the file name.  Since you want to find all files with "DES084" anywhere in the name, I guess (not only at the end of the file name), you must add an another wildcard to the value of the - include parameter in the statement "dir".  As:

  ...## search for everything that has "DES084" in the namedir -Recurse -Path vmstores:\ -Include *DES084* | select Name,DatastoreFullPath,LastWriteTime | Export-Csv -NoTypeInformation -UseCulture -Path D:\MyVMDKInfo.csv
  

  What to do better for you?

• Using several data stores, cannot migrate the vmx file in a data store

  I am host migration between 3.5 and 4.0, and part of the migration requires me to vmotion data to a single shared LUN data warehouses.  From there on, I import the virtual machine in 4.0 and using the script to migrate the two VM disks at different stores of data below.  The problem I have is that the configuration (vmx) file not migrated and is left on the shared storage LUNS.  Anyone knows how to go beyond this?

  The Script:

  $VMDisk = 'disk 1 '.

  $VMName = 'TestVM '.

  $TargetDS = get-Datastore - VMHost (Get-VMHost-$S.id Id) | Where-Object {$_.} Name - like "PMV"} | "" FreeSpaceMB tri-objet-descending | SELECT name - first of all 1

  $vm = get-View - ViewType VirtualMachine-filter @{"Name" = $VMName}

  foreach ($dev in $vm. Config.Hardware.Device) {if ($dev. DeviceInfo.Label - eq $vmDisk) {$diskId = $dev. Key}}

  $spec = new-Object VMware.Vim.VirtualMachineRelocateSpec

  $diskspec = new-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator

  $diskspec. Data store = (Get-Datastore-name $TargetDS.Name |) Get - View). MoRef

  $diskspec.diskId = $diskId

  $spec. Disk = @($diskspec)

  $task = get-View ($vm. RelocateVM_Task ($spec, "lowpriority"))

  OK, I think I understand your problem now.

  I fear that in the current construction of PowerCLI, the Move-VM cmdlet does not destinations of individual data for each virtual hard disk store.

  With the RelocateVM_Task method, it is possible.

  The following script moves a guest at 3 different data warehouses:

  -the. VMX file for DS2

  -hard disk 1 for DS3

  -hard drive 2 TB DS4

  $vmName = "MyGuest"
  $vmxDS = "DS2"
  $osDS = "DS3"
  $dataDS = "DS4"
  
  $vm = Get-VM -Name $vmName
  
  $vm.Extensiondata.Config.Hardware.Device | %{
       if ($_.DeviceInfo.Label -eq "Hard disk 1"){
            $osDiskId = $_.Key
       }
       elseif($_.DeviceInfo.Label -eq "Hard disk 2"){
            $dataDiskId = $_.Key
       }
  }
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  
  $osRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $osRelocate.Datastore = (Get-Datastore -Name $osDS).Extensiondata.MoRef
  $osRelocate.diskId = $osDiskId
  
  $dataRelocate = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $dataRelocate.Datastore = (Get-Datastore -Name $dataDS).Extensiondata.MoRef
  $dataRelocate.diskId = $dataDiskId
  
  $spec.Disk = @($osRelocate,$dataRelocate)
  $spec.Datastore = (Get-Datastore -Name $vmxDS).Extensiondata.MoRef
  $spec.Host = $vm.Extensiondata.Summary.Runtime.Host
  
  $task = Get-View ($vm.Extensiondata.RelocateVM_Task($spec, "lowpriority"))
  while("running","queued" -contains $task.Info.State){
       $task.UpdateViewData("Info")
       sleep 5
  }
  

  BTW, you can use the cmdlet Set - hard disk to a virtual disk that is specific to a data store.

  But as I understood what is not possible in your environment.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Cluster data warehouses

  I would like to create a dashboard that displays a list of all VMWare clusters and for each handset display data warehouses that are used for each of them. Looking for a way to create the dashboard without slipping each store data in the dashboard.

  1 is it possible with a query of the user interface?

  Data > VMWare > centers > (name datacenter) > cluster > (cluster name) > ESX host > (host name) > storage > data warehouses

  If you want the names and what may not be a little cleaner that I would try this, it also removes the need for the additional query keep things all neat.

  cluster = server.get ("QueryService").queryTopologyObjects("!) VMWCluster')

  output =]

  (cluster in clusters)

  {

  data warehouses = cluster.esxServers.datastores

  for (data in data warehouses store)

  {

  map = [VMWCluster:cluster.name, VMWDatastore: datastore.name]

  output. Add (Map)

  }

  }

  return output

• Reports of data using powercli store

  Hi all

  How can we get reports of data store using commands Powercli?

  Please suggest

  Thank you

  Arvin

  Well, there are basically the cmdlet Get - data store to do so.

  For example

  Get-Datastore. Select Name, CapacityMB

  But what are the properties of the data warehouse you want to see in your report?

• Fully connecting directly attached data warehouses in a cluster of ESXi?

  I have deployed two identical 5.1 ESXi hosts (servers Dell PowerEdge r720xd) each to 5,46 with storage to direct connection. They are both currently enrolled in our vCenter Server 5.1 and participate in a HA cluster. Their respective databases are also members of a group of data store.

  Each host is connected to its own data store, but not the other host data store. This effectively disables most of the HA/DTS features, and connection status of host for each data store is marked with a warning for missing connections. We have desire of VM migration and load balancing between the two hosts and the warehouses of data to be as homogeneous and transparent as possible.

  My question is simple: what is the most practical and effective way to establish the necessary connections to reach a State fully connected to hosts and data warehouses?

  Hello

  in this case you need something like a virtual appliance that uses your local storage to make it a shared storage. Your hosts can then access the storage via iSCSI/NFS. At the end of the day, you will have the space of a single node left (CT ~ 5.46), because the device (s) will reflect your data for more security against failure of the host.

  The easiest way would probably be the vSphere Storage Appliance

  But there are also other solutions as a virtual of DataCore and HP StoreVirtual VSA facility.

  Concerning

  Patrick

• Get cluster data warehouses in VC

  Hi all

  I've been trying to write a code that lists all data warehouses in use by each cluster but little progress with it (I know that data warehouses are not a property of the bunch and I need to interogate each vmhost cluster for the info to store data but imreally+ bad)... Ideally I am looking for a similar to the following output in a CSV file:

  CLUSTER NAME DATASTORE NAME NO OF VMS CLUSTER DATASTORE DATASTORE USED SPACE FREE SPACE DATA STORE CAPACITY

  clustertest1 new 88 150 GB 100 GB 50 GB data store

  clustertest1 another datastore 88 70 GB 10 gb 60 gb

  Has anyone known this before - or even something similar?

  Any help would be appreciated.

  See you soon

  This should get you.

  $report = @()
  
  $clusters = Get-Cluster | Get-View
  foreach($cluster in $clusters){
    $esxImpl = Get-VIObjectByVIView -MORef $cluster.host[0]
    $VMnr = (Get-VIObjectByVIView -MORef $cluster.MoRef | Get-VM).Count
    $datastores = $esxImpl | Get-Datastore
    foreach($ds in $datastores){
        $row = "" | Select ClusterName, DatastoreName, VMnr, DScapacity, DSused, DSfree
       $row.ClusterName = $cluster.Name
       $row.DatastoreName = $ds.Name
       $row.VMnr = $VMnr
       $row.DScapacity = $ds.CapacityMB
       $row.DSused = $ds.CapacityMB - $ds.FreeSpaceMB
       $row.DSfree = $ds.FreeSpaceMB
       $report += $row
    }
  }
  $report | Export-Csv ".\Cluster-Report.csv" -noTypeInformation
  

  Note that the script assumes that all ESX servers in a cluster of see same data warehouses.

• Use the date filter to change in fsisys.ini - Documaker Server 11.1

  Hello

  I'm trying to create a filter for my lot at fsisys.ini (Documaker Server 11.1). I would use a date, however, it does not work. Is this possible?

  Here's what I entered:

  Rebatch = BatchName (sdbib) If ((TranType = "BILL" et COMPANY_NAME = "COMPAGNIE D'ASSURANCE XYZ") or (TranType = 'Bill' and COMPANY_NAME = 'ABC INSURANCE COMPANY' and POLICY_EFF_DATE > = November 1, 2013 '))

  The result will in the default batch instead of the one I want (sdbib). Of course when I remove the date it goes into the good batch.
  

  Solved my problem! Lines added to BatchingBYRecip in fsisys.ini using two different DALs include the DiffDate. If the FDA is not met, the DefaultBatch is used.

• Report on the use of data store based on cluster (not data center)

  Hello

  I want to create separate HTML reports for each cluster I have in my virtual Center. I've created a script, but it doesn't seem to work. This script creates outputs separated from HTML based on clusters, but all the files have the same data, i.e. all data that are available in the Vcenter stores. How can I separate them with regard to the cluster in which they are assigned to the place?

  ===========================================================

  # Functions for math operations.

  usedspace {} function

  Param ($datastore)

  [math]: round (($datastore.)) CapacityMB - $datastore. (FreeSpaceMB) / 1024,2)

  }

  function dscapacity {}

  Param ($datastore)

  [math]: Round ($datastore. CapacityMB/1024,2)

  }

  freespace {} function

  Param ($datastore)

  [math]: Round ($datastore. FreeSpaceMB/1024,2)

  }

  function {percentage

  Param ($datastore)

  [math]: Round ((($datastore.)) FreeSpaceMB/1024) /($datastore.) CapacityMB/1024) * 100) / 1.2)

  }

  #Connect to Vcenter

  to connect-viserver-Server < myservername >

  # CSS stylesheet

  $a = '< style >.

  $a = $a + "BODY {background-color: Gainsboro ;}}.

  $a = $a + "TABLE {border-width: 1px;}. border-style: solid; border-color: black; border-collapse: collapse ;} »

  $a = $a + "TH {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: Blue}".

  $a = $a + "TD {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: PaleTurquoise}.

  $a = $a + ' * {do-family: Verdana, Arial, Helvetica, without serif;} '. font size: small ;} »

  $a = $a + ' < / style >.

  # get a list of clusters

  $clusters = get-cluster

  # Create HTML report for each cluster

  foreach ($cluster in $clusters)

  {

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  $Report = @)

  {ForEach ($datastore to $datastores)

  $row = "" | Select-object Datastore, Datacenter, CapacityGB, UsedGB, FreeSpaceGB, PercentFree

  $row. Data store is $datastore. Name

  $row. Datacenter = $datastore. Data Center

  $row. CapacityGB = dscapacity $datastore

  $row. UsedGB = usedspace $datastore

  $row. FreeSpaceGB = freespace $datastore

  $row. PercentFree = % $datastore

  $Report += $row

  }

  $Report | Tri-objet-property PercentFree | ConvertTo-Html-head $a | Set-Content "D:\VMware\Scripts\Reports\Storage\$cluster.html".

  }

  ===============================================================

  To recover the cluster data warehouses, you must change the line:

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  in:

  $datastores = $cluster | Get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

• PowerCLI script for DatastoreCluster, data warehouses and the size info, DataCenter, Clusters

  Hello - I am looking to remove the DatastoreClusters and then list data warehouses as well with their size (total size, used space, free space, put in service, uncommitted space) and the total number of virtual machines on this data store. I would also like to understand what data center and they are on clusters. Is this possible? I might want to limit what is displayed in data warehouses that are 13 percent of free space or less.

  Thank you

  LORRI

  Of course, try this way

  Get-Datastore.

  Select @{N = 'Center'; E={$_. Datacenter.Name}},

  @{N = "DSC"; E = {Get-DatastoreCluster - Datastore $_______ |} {{Select - ExpandProperty name}}.

  Name,CapacityGB,@{N='FreespaceGB'; E = {[math]: tour ($_.)} (FreespaceGB, 2)}},

  @{N = "ProvisionedSpaceGB"; E = {}

  [math]: Round (($_.)) ExtensionData.Summary.Capacity - $_. Extensiondata.Summary.FreeSpace + $_. ExtensionData.Summary.Uncommitted)/1GB,2)}}.

  @{N = "UnCommittedGB"; E = {[math]: tour ($_.)} ExtensionData.Summary.Uncommitted/1GB,2)}}.

  @{N = "VM"; E={$_. ExtensionData.VM.Count}} |

  Export Csv report.csv - NoTypeInformation - UseCulture