Satellite L350-262 touchpad stopped after the latest updates of windows

Similar Questions

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PunkBuster not working after the latest updates of Windows

  Hello

  Since I installed the latest updates for Vista x 64, I continue to pounce on COD5 with this exception:

  Application CoDWaWmp.exe, version 1.5.1220.0, time stamp 0x4a5241f6, failed module pbcl.dll, version 0.0.0.0, time stamp 0x4a5cb487, exception 0xc0000005, fault offset 0 code x 00026914, 0x5d0, failing application start 0x01ca36117f69c74e process id.

  The problem seems to be related to the Punkbuster client. Before the latest updates, I don't have a problem.
  For Windows XP, a similar problem was introduced with KB917422 (in connection with Kaspersky anti virus I think).

  Any thoughts on this topic?

  Best regards, Wilbert

  SRY, but if PB doesn't work, you don't have to format your PC.
  Just try to reinstall PB.

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• How to enable Windows defender, which stops after the recent updates of Windows

  Original title: Windows defender

  How to move the Defender - he seems to be overiden of norton and macfey and will not pass by clicking on the correct line to action center just turn the color line and the action buttons lights? also happens it on windoows 7. do I need to remove programs? also why the need to reset once again frequent wireless adapter it only happened since the received updates before it never happened? the phone works ok, so should i be in desktop computers.

  Steve,

  to enable WIndows defender, check if this link helps

  http://Windows.Microsoft.com/en-us/Windows/turn-Windows-Defender-on-off#turn-Windows-Defender-on-off=Windows-7

  http://www.SevenForums.com/tutorials/6397-Windows-Defender-turn-off.html

• LR doesn't stop after the last updated only with force quit

  LR doesn't stop after the last updated only with force quit

  Hi peterc48702056,

  For Windows, I'd say to set the priority of the process in Lightroom as a via the Task Manager

  For Mac, you suggested to copy the catalog to the location on the desktop or another location and then, check if the problem persists.

  Kind regards

  Claes

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• After the last update of windows, I now shadows behide the fonts & photos

  After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

  Hello

  What is your Windows operating system?

  Right click on my computer

  Select Properties

  Select advanced system settings

  Running, click on the settings button

  Uncheck show shadows under menus

  Disable shadows decline of use for the desktop icon labels

  Click on apply, Ok

  Click OK

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• After the latest updates from Microsoft, my Internet Backgammon supplied with Windows 7 no longer works. It is a dead link and the game opens same. That's happened?

  I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition.  However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works.  It's just a dead link.  I can click on it, but nothing happens.  Not even an ounce of trying to open.  It's just 'died '.  I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games?  Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play.  I am referring to the one in the Games folder, which is installed with Windows 7.  I play this game almost every day, so I hope that it will be restored.  I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...

  Hi Kentuckywoman,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.

  -What are the updates installed recently?

  Method 1: I suggest you to perform system restore and see if it helps.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.

  Step 1: Uninstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.

  (d) to restart the computer.

  Step 2: Reinstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• Remote connections disabled after the last update of Windows (Windows XP)

  September 14, Windows Update has installed several security updates.  After installation, my remote desktop connection ability has been disabled and I can't connect to my iPod via a USB connection.  I checked control panel and security settings, but can't find what has caused these deactivations.  Installed updates: KB2259922 KB975558 KB2347290 KB982802 KB981322 KB890830 and KB2141007 KB2121546

  No doubt...

  MS10-066: vulnerability in remote procedure call could allow remote code execution
  http://support.Microsoft.com/kb/982802

  See the section "How to get help" of http://support.microsoft.com/kb/982802

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support