Cannot find my disabled dock

Similar Questions

• Cannot find or disable simple file sharing

  I am trying to load a Virus checker and keep from telling me I have to disable, simple file sharing, going to folder Option > view > uncheck! Problem is there is no box tht looks like to a file share.

  It is a netbook for samsung Windows XP. Are there other options to disable file sharing.

  Hi GarethOZ,

  Please see the following articles for more information on disabling Simple file sharing:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

  http://support.Microsoft.com/kb/307874

   

  How to use Simple file sharing to share files in Windows XP

  http://support.Microsoft.com/kb/304040

  Let us know if that helps.

• Code 12 Mobile Intel (r) Express Chipset Family 995 cannot find enough free resources that it can use. Must disable another device.

  I know what this means, but do not know how to fix it!  What other device safely disable to make this work?  Any help will be appreciated.  Thank you!

  See this:

  Code 12: This device cannot find enough free resources that it can use
  http://TechNet.Microsoft.com/en-us/library/cc732199 (v = ws.10) .aspx

  Try running the Fixit mentioned on the link under "additional information."

  If this does not work, try this:

  Go to Device Manager, under the display adapter, double-click on your Mobile Intel (r) Express Chipset Family 995 to see its properties. Click on the 'Resources' tab, under "Conflicting device list" note the device in conflict. Look for the device in Device Manager, if its listed under "other devices" right click and uninstall the device. Alternatively, you can "update driver software... ' or 'Disable' the device.

  See the links in the reference below:
  Resolve conflicts the Windows Device Manager
  http://support.verizonwireless.com/CLC/devices/Knowledge_base.html?ID=48051

  Troubleshooting of conflict of devices with Device Manager
  http://support.Microsoft.com/kb/310126

  Resolve hardware conflicts
  http://www.annoyances.org/exec/show/article07-003

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• Satellite Pro A300: code 12 - this device cannot find enough resources

  I use Vista Business 32 on my Toshiba Satellite Pro A300.

  Recently, I plugged my parallel to my laptop port adapter and the Device Manager, I had a device that said conflict error, "this device cannot find enough free resources that it can use. (Code 12).

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can anyone help me please with sorting on this problem?

  TEMI

  Hello

  This is a typical mistake if both devices have been attributed, ports of entry/exit (e/s), the same interrupt, or the same Direct access channel in memory.
  This error message can also appear if the BIOS did not allocate enough resources for the device.

  If seems that the resources are already used by another device, and so there is a conflict with the parallel port adapter that you have installed manually.

  I think you can only solve this check other devices that use the same resources and then that disabling in Device Manager.

• Satellite L300-19Y: problem GPU - device cannot find enough free luipermettant

  I have an error message on my display Adaper stating,

  «The device cannot find enough free luipermettant it can use (code12).»
  If you want this device, you will need to disable one of the other devices on the system. »

  It is a Satellite L300-19Y with graphics Mobile intel 4. I have updated to the latest version of the driver.

  The screen is very blurry at the moment.

  Please help with a solution if possible.

  Hello

  I found your other thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=250126

  You tried to install an ATI driver on this laptop.
  I don't know if this would affect the functionality of the OS, but it seems that you get an error message during the installation of the Intel driver, then perhaps you have confused the OS installed some drivers wrong

  Have you used the driver from the Toshiba driver page?
  If this isn't it!

  You must first uninstall the driver in Device Manager and then reboot the laptop.
  After the new reboot, you should check if you could install the driver once more

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• HP Compaq 6910 p: 6910p "this device cannot find enough free resources that it can use. (Code 12) »

  Under hardware and Sound/devices and printers, I have a yellow triangle with my 6910p icon.  Right click on the "hardware" tab States "this device cannot find enough free resources that it can use. (Code 12).

  I've recently upgraded the operating system to Windows 7 Professional.  Everything works ok but I show this yellow triangle where the devices are displayed.  When I look in Device Manager/Mobile Intel (r) 965, I get a window saying 'Problem detected with Mobile Intel (r) 965 Express Chipset Family'.   The next window States: "the device cannot find enough free resources that it can use. (Code 12).  If you want to use this device, you have to disable other devices on the system once".

  How can I go about doing so, the yellow triangle disappears?

  I tried to reinstall device Base system SP46972 and SP45738 of the video driver.

  Not sure if this is related, but I also have a black screen with a 1 in. border on the left and the right, which was not the case when Windows XP is the operating system.  I also need to solve this problem as well.  Searches on Google did not find the solution, so I hope someone can provide the answers to these two questions.

  

  Glad to hear that you would have recommended as the next step.  It has proved to be a challenge, but one that we have managed to find solutions for.    Thanks again for all your help and patients.     Carl

• HP Envy 5530: HP ENVY 5530 "cannot find the printer"... impossible to see where I am going wrong!

  Hello

  We just put a HP Envy 5530, set up was fine, I tried installing but get the message "cannot find printer" over and over again.

  I tried to download printing HP and Scan doctor but also, it does not find the printer.

  I ran two reports of diagnoses on the printer, everything looks ok, I have an IP address with an IP address that suggest that it has connected wirelessely, the network report said no problems were discovered.

  I tried disabling my firewall, all made once again, still nothing.

  I put the IP address in the address bar, but it does not open!

  I don't seem to have a printer/USB cable witht the printer so I can't tey wireless - I one of them, it was a new purchase?

  I don't really have an idea what to do next, it seems I have a printer connected to the network, your laptop to talk to the network but nothing to talk with each other. I also tried to find the printer with my IPad, but he also could not find a printer.

  Any ideas, im really frustrated

  Thanks in advance

  Hello

  They are on the same Beach, they should be. Now please reset it and try again

  1 reset the printer

  b press settings (wrench),

  (b) press tools then use the arrorw down to access page 2/3,

  (c) touch Restore Factory Defaults - wait a few minutes

  2 reinstall the printer

  (a) you can use the CD, but it will download the file and may take ages to download. Please download the software and the following drivers

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

  (b) turn on the printer,

  (c) right click on the downloaded file and select run as administrator.

  d select Wireless and then follow the instructions on the screen.

  Kind regards.

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Windows Vista Home Premium cannot find Xbox 360 as extender

  This may be long but im giving information as possible.

  I'm good with the computer. My Vista Home Premium computer cannot find my xbox 360 as an Extender. When I use the WIndows media player 11 and share, he sees my xbox very well. Zune software, same thing. My xbox 360 is here no problem on my network in "My Network Places".

  In Media Center, once I typed the 8 digit number it is said that he can not find the Extender. I did the following:

  Reset my router
  Reformat my computer
  Reset my xbox 360
  Double checked I got the right 8-digit number in media center
  Disabled windows firewall
  Went to the tab exceptions and compatible: WIndows Media Center, Media Center Extender, eshell.exe, discovery network
  went to the management of the computer and turned on UPnP device host (changed the startup type to automatic and restarted my computer)
  Permit "filter multicast" in my router settings
  UPnp enabled in my router settings
  Upgrade Vista (with SP1 as well)
  Re-installed the drivers for my wireless card
  Connected to the Xbox 360 WIRED to my router

  Heres the funny thing, I have a Sony laptop vaio with Windows Media Center Edition 2005 on the same network that sees my xbox all the time. Its actually connected through a microsoft extension program (XboxMCE05Lite - enu.exe) basically it works fine.

  One funny thing that may help with my vista (Home premium) Windows Remote Assistant machine fails or the other.

  Any ideas? If this can help, too, this computer is built on the ground.  Sense, this isn't a HP, Dell, Sony, etc.

  Network equipment:
  Router Linksys WRT54G
  Map of Netgear WG311v3 54 Mbps Wireless

  works fine with my other laptop. So I guess that the problem must be my wireless card. I guess that's a PCI card it would have nothing to do with the problem. I'm going tomorrow to buy a NIC. USB Im not in a race simply because my internet works very well without getting a new network card. I am just puzzled and would like to get this to work because I hate running through computer problems and in abeyance. I'll get one tomorrow and let you know the guy.

• Windows cannot find "secpol.msc".

  To enable or disable application Setup detection I run secpol.msc.  But Windows cannot find "secpol.msc". What should I do?

  Hello

  • What version of windows is installed on your computer?
  • Why do you want to run secpol.msc?
  • What you try to do it on your computer?
  I want to tell you that the local security policy is not available on starter Home premium sound available only in Ultimate, professional company.

  You can use following methods that can help you solve your problem, if you are using full, Enterprise, professional edition:

  Method 1: Run the blocked program or the blocked service

  After Windows Vista starts, you can run programs blocked or blocked services by following these steps:

  1. click on the blocked startup programs in the notification area icon.

  2. tap on the blocked programand then click the program or service in the list that you want to start. Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.

  Method 2: Disable the blocked program or the blocked service

  To disable a program or a service during the Windows Vista startup process, follow these steps:

  1. click on the blocked startup programs in the notification area icon.

  2. click on show or remove blocked startup programs. This starts Software Explorer in Windows Defender.

  3. Locate and then click to select the startup program or the boot service that is in Software Explorer.

  4. click on disable, and then click Yes in the confirmation dialog box.

  For more information, please see the following article:

  Error message when you start a Windows Vista-based computer: "Windows has blocked some startup programs".

  http://support.Microsoft.com/kb/930367