Cannot find Ni845x.dll

Similar Questions

• I Photofunstudio 8.0SE but when I try to run it, I get error "cannot find MSVCR71.dll.

  I loaded Photofunstudio 8.0SE leave a DVD. When I try to run the program I get the error message "Cannot find MSVCR71.dll" I ran SFC but always this error message. Should I try downloading the file from the internet, if so where? Thank you Al7 I forgot to say that I am under windows7 64 bit

  Hi Al 7.

  There are several different ways that msvcr71.dll errors may appear on your computer. Here are some of the most common ways that you can see msvcr71.dll errors:

  • "Msvcr71.dll not found."
  • "This application has failed to start because msvcr71.dll was not found. Reinstalling the application may fix this problem. »
  • "Cannot find [PATH] \msvcr71.dll.
  • "The msvcr71.dll file is missing."
  • "Failed to start [APPLICATION]. A required component is missing: msvcr71.dll. Please reinstall [APPLICATION]. »

  Msvcr71.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the msvcr71.dll error is a key piece of information that will be useful while solving the problem.

  Cause of Msvcr71.dll errors
  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file.

  In some cases, the msvcr71.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

  How to fix Msvcr71.dll errors
  Important: do not download msvcr71.dll from a website "Download DLL. There are many reasons why a DLL file download is a bad idea. If you need a copy of msvcr71.dll, it is better to get it from its original, legitimate source.

  Note: Start Windows Mode without failure to complete one of the following steps if you are unable to access Windows normally due to msvcr71.dll error.

  1. Restore the trash msvcr71.dll. The simplest possible cause of a "missing" msvcr71.dll file, it's that you deleted by mistake.

     If you think you've accidentally deleted msvcr71.dll but you already emptied the Recycle Bin, you can collect msvcr71.dll with a free file recovery program.

     Important: Recovering a deleted copy of msvcr71.dll a file recovery program is a smart idea if you are convinced that you have deleted the file yourself, and that it was working properly until you did.

  2. Run a scan for virus/malware from your whole system. Msvcr71.dll errors may be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the msvcr71.dll error you see is related to a hostile program who is posing as the file.

  3. Use the system restore to undo recent system changes. If you suspect that the msvcr71.dll error was caused by a change to an important file or a configuration, restore the system could solve the problem.

  4. Reinstall the program that uses the msvcr71.dll file. If the DLLS msvcr71.dll error occurs when you use a particular program, reinstall the program should replace the file.

     Important: Do your best to do this next step. Reinstall the program that provides the msvcr71.dll file, if possible, is a likely solution to this DLL error.

  5. To update the drivers for hardware devices that might be linked to msvcr71.dll. If, for example, you receive an error "the msvcr71.dll file is missing" when you play a video game in 3D, try to update the drivers for your video card.

  Note: The msvcr71.dll file may or may not be related to video cards - it was just an example. The key here is very attentive to the context of the error and troubleshoot accordingly.

• Roll back a driver to a previously installed version if msvcr71.dll errors started after the update of a particular hardware driver.

• Run the sfc/scannow command System File Checker to replace the copy of msvcr71.dll missing or damaged file. This DLL file is provided my Microsoft, the System File Checker tool should restore it.

• Install the available Windows updates. Several service packs and other patches replace or update some of the hundreds of distributed Microsoft DLL files on your computer. The msvcr71.dll file could be included in either of these updates.

• Test your memory and test it on your hard drive. I left the majority of troubleshooting equipment at the final stage, but memory and hard drive of your computer are easy to test components are more probable that could cause msvcr71.dll errors because they do not.

  If one of your tests of hardware failure, replace the memory or replace the drive hard as soon as possible.

• Repair your Windows installation. If the msvcr71.dll file individual troubleshooting tips above fails, perform a restart or a repair installation should restore all Windows DLL files to their working versions.

• Use a free registry cleaner to fix msvcr71.dll issues in the registry. A free registry cleaner program may be able to help by deleting some registry entries disabled msvcr71.dll that might cause the DLL error.

  Important: Rarely, I recommend the use of registry cleaners. I've included the option here as an attempt to 'last resort' before the destructive step to come up next.

• Perform a new installation of Windows. A clean install of Windows will erase the entire hard drive and install a fresh copy of Windows. If none of the above steps fix the msvcr71.dll error, this should be your next course of action.

  Important: All the information on your hard drive will be erased during a clean installation. Make sure that you have done the best possible attempt to correct the msvcr71.dll error using a troubleshooting step before this one.

• Troubleshooting a hardware problem if any msvcr71.dll error persists. After a clean install of Windows, your DLL problem may be hardware related.

Applies to
The msvcr71.dll error message could apply to any program or system that could use the file on any of the operating systems of Microsoft Windows 8, Windows 7, Windows Vista, Windows XP, and Windows 2000.
Msvcr71.dll questions?
That a community of computer supported the help of enthusiasts! View the details of your question msvcr71.dll in the Microsoft Community. Don't forget to let us know the exact msvcr71.dll error message you see, and what measures, if any, you already have to solve the problem.

• Problem with drivers - error: "Cannot find EBLib.dll" - Satellite A110

  Hello
  Since last summer, I have a Satellite A110. I formatted it in order to install Windows XP Pro. I found and downloaded the drivers and the HotKey Utility software, boot, I have a nice error message that says "cannot find the EBLib.dll."
  I searched the web, and I've not found anywhere to download this DLL. On the site Web of Toshiba, the same thing...: s

  Where can I find this dll?

  NB: Please excuse my language, but I'm not English: P

  Thank you very much

  Hello

  These problems may occur if you do not install the drivers and tools in the correct order.
  You will find this order on the pilot, called installation instructions download page.

  Good bye

• excutable cannot find the dll

  In my workstation, I build an executable, "MUTS Rev L3.1', in LabVIEW 8.6 However, after generation folder 'MUTS Rev L3.1' is installed on another PC on the threshold of the test and the clicks of the operator on the launch of the application executable icon is stopped because it can't find"phidget21.dll"once the file is located in the folder build continuous exploitation of the lauch and the application to load. How can I prevent the operation of launch of prompting the user to find phidget21.dll?

  Best regards

  Jaime Arevalo

  Test engineer

  MicroPac Industries

  AM trying to find a way to place it on desktop an icon defined by the user (not a shortcut), associated with the exec request LV

  Not an easy task when the IT departments get involved.  You will need a few powerful enough to access all Users\Bureau admin priviladges and this isn't a very nice place to put an application.

• LV2010 cannot find the dll but Win7 he sees

  I'm trying to access a DLL from a company called Micro USB by using 2010.  I take the DLL (USBm.dll) and place it in the Systems32 folder.  I can use Explorer and see that the file is there, but when I use the function go to the library function call knot VI, it does not appear in the window.  I tried using a constant file and feeding in the VI but with the same results.  I even made a subdirectory in the System32 directory and travel it VI does not see the subdirectory.

  I did it before in earlier versions of LV with no problems.

  I checked file permissions and they seem to be the same as the other DLLS

  All the world ever seen this problem or am I suffering skull rectumitus?

  LabView can find the DLL if it is not in System32.

• Cannot find mxml1.dll

  I created an executable file with CCTK Dell to change the bios.

  This executable works fine on the machine on which I created the executable file.

  However, if I run the executable on another machine with the same exact specifications, it gives an error: could not find mxml1.dll.

  Anyone an idea how to solve this problem?

  Thanks much for the reports.

  A minor bug in the previous version of the BIOS have problem CCTK and OMCI.

• Cannot find RIMIDEWin32Util.dll

  When I install the JDE, I am able to launch fine. However, any subsequent attempt to start the JDE returns an error indicating that it is unable to find RIMIDEWin32Util.dll.  I was able to find this post, which described the same problem.  Only given support Council was to ensure that the actual .dll file was in the JDE installation directory, and mine is.

  Does anyone know what could be the cause?

  Set the following environment variables:

  JAVAHOME path to the directory where the JDK is installed

  PATH add the path to the folder bin of your JDK. For example if the JDK installed in the c:\jdk folder, and then add the following code to the PATH variable: c:\jdk\bin

• Trying to download the order of the photo, I keep getting an error message: "cannot find p90.dll msvc.

  Original title: MSVC P90. MISSING DLL

  When I try to download a Walgreens or Wal-Mart photo order, I get a message: "can't find msvc p90.dll" which gives and how to fix it?

  Hello

  1. what program you use to download the photo order?

  2. were you able to download photo arrested earlier?

  3. What is the error message or an exact error code?

  4. have you made changes on the computer before this problem?

  I suggest you to download and install the Microsoft Visual C++ Redistributable package and check if it helps.

  Microsoft Visual C++ 2010 redistributable package (x 64):

  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Microsoft Visual C++ 2010 redistributable package (x 86):

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Please provide us with more information so that we could help you to solve the problem.

• 2 dialogs at startup. Cannot find inret.dll or apefdf.dll.

  course user/software/windows/currentversion/run.

  Rundll32.exe "C:\Users\REELCU~1\AppData\Local\Temp\apefdf.dll",IsConvertImagesDialogShowed"

  Rundll32.exe "C:\Users\REELCU~1\AppData\Local\Temp\inret.dll",mpegInSeekSample"

  Hello

  We can not find much information on them; so, they can be leftovers from deleted malware startup entries.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Cannot find NTload.dll

  I get the following error window after loging on the PC of VISITS:

  RunDLL error loading CASSAN ~ 1\ntload.dll C:\Users\.

  The specified module could not be found.

  Need to know were to look for the problem.

  Thank you.

  Also, is it still a spectator even?

  Kind regards.

  Hmmm, sounds like you pourriez have picked up some malware, so let's don't forget...  Download...

  http://www.Malwarebytes.org/

  .. and scan, remove everything it finds.

• AppleSyncNotifier.exe - cannot find component__Corefoundation.dll can not be found. where can I get these from?

  AppleSyncNotifier.exe - Unable to locate component

  Corefoundation.dll was not found where can I buy from?

  Hello
  
  Try the steps by Lorien - One (Monday, 9 August 2010 18:07) the link below and check if that helps.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e69def34-439D-4C4A-83da-4e3770fedf8f

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot find the DLL WoW64 in Windows 7

  My new Toshiba Satellite provided with 64-bit Windows 7 Edition Home Premium (Service Pack 1 Build 7601 6.1.7601). THERE ARE No. WoW64 dll.  How can I get these DLLs to (try) to run 32-bit applications?

  Hello gkbackman,

  If you go to Windows Explorer and you develop on C:\.
  Go to Windows.
  You have a listed SysWOW64 folder?
  When executing 32-bit applications, WoW64 redirects transparent to a 32-bit dll that contains 32-bit library and executable files.

  That's what you need to the dll is listed in the SYSWOW64 folder.

  I hope this helps.

  Marilyn

• SMProxy.exe - cannot find component__PushMgr.dll is not found

  I get an error at startup

  helpinox,
  I looked around and it seems that the files you mentioned are associated with a program of Earthlink.  If you use Earthlink software then you will need to recharge.  Otherwise then go through the uninstall program and make sure that all programs Earthlink have disappeared. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find the code d2d1.dll and error 0x8007007e

  When attempting to access the Windows Photo Gallery, I get the error message cannot find d2d1.dll then 0x8007007e error code

  Hi R_Rockhound_VWalker,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Path of the module has changed, now all my not can't find the dll

  I moved the dll of cvi that I wrote and all the steps in my file of sequence now complain that they cannot find the dll. Each has the former location of file.  Is there a way to update all the change them without anyone?

  Thank you

  Hi swja,

  When do me, I do in a strange way. But I think that is extremely effective.

  1.) save your seq. ini. format.

  2.) make a copy! Rename the PostFix .cpp or .c

  3.) open with VisualStudio or CVi (or a tool of plain text that take in charge of search and replace)

  Search 4.) and replace the path/name.dll on the file of the hole

  5.) record

  6.) rename it to .seq

  She's.

  Greetings

  Jürgen

  = s = i = g = n = a = t = u = r = e = click the laurels (Gold Star) and see which is passes = s = i = g = n = a = t = u = r = e =.